Metal Roof Installation cost: Arlington Heights vs Aurora (2026)
Metal roof installation costs about the same in Arlington Heights and Aurora in 2026 — roughly $25,700 in each.
Arlington Heights IL
Typically around $25,700
Aurora IL
Typically around $25,700
Arlington Heights vs Aurora: full breakdown
| Factor | Arlington Heights | Aurora |
|---|---|---|
| Typical 2026 cost | $25,700 | $25,700 |
| Estimated range | $15,650–$35,700 | $15,650–$35,700 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $300 |
| Labor share | $15,400 | $15,400 |
| Materials/equipment | $10,300 | $10,300 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
A wash — choose on quality, not city
This is a statistical tie on metal roof installation cost, so let contractor reputation and project timing decide, not geography.
Metal roof installation by type: Arlington Heights vs Aurora
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Arlington Heights | Aurora |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,900–$21,550 | $10,900–$21,550 |
| Standing-seam steel | $21,550–$41,600 | $21,550–$41,600 |
| Aluminum | $16,850–$33,350 | $16,850–$33,350 |
| Copper | $35,700–$71,100 | $35,700–$71,100 |
| Zinc | $33,350–$65,200 | $33,350–$65,200 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Arlington Heights vs Aurora
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Arlington Heights | Aurora |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,750–$19,200 | $9,750–$19,200 |
| 1,500 sq ft (15 squares) | $13,300–$27,450 | $13,300–$27,450 |
| 2,000 sq ft (20 squares) | $15,650–$35,700 | $15,650–$35,700 |
| 2,500 sq ft (25 squares) | $19,200–$42,800 | $19,200–$42,800 |
| 3,000+ sq ft (30 squares) | $22,750–$49,900 | $22,750–$49,900 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Chicago-Naperville-Elgin metro · about 23% above the US average installer wage.
Chicago-Naperville-Elgin metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Arlington Heights vs Aurora
Is metal roof installation cheaper in Arlington Heights or Aurora?
Practically identical — expect around $25,700 for metal roof installation whichever city you're in.
Why does metal roof installation cost more in Aurora than Arlington Heights?
It comes down to labor: Aurora indexes at 1.14 against Arlington Heights's 1.14. The cold-vs-cold climate difference adds to the gap.
How much is metal roof installation in Arlington Heights, IL?
Arlington Heights homeowners can expect $15,650 to $35,700 for metal roof installation in 2026, with $25,700 the typical number.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $38.1/hr in the Chicago-Naperville-Elgin area and $38.1/hr in Chicago-Naperville-Elgin. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Arlington Heights and Aurora (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Arlington Heights and Aurora — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik