Furnace Replacement cost: Hicksville vs Queens (2026)
Hicksville and Queens are a near-perfect match on furnace replacement cost in 2026, both landing around $6,900.
Hicksville NY
Typically around $6,900
Queens NY
Typically around $6,900
Hicksville vs Queens: full breakdown
| Factor | Hicksville | Queens |
|---|---|---|
| Typical 2026 cost | $6,900 | $6,900 |
| Estimated range | $4,900–$8,850 | $4,900–$8,850 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | $250 | $250 |
| Labor share | $4,150 | $4,150 |
| Materials/equipment | $2,750 | $2,750 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
A wash — choose on quality, not city
With no real price gap on furnace replacement, the choice comes down to contractor quality and timing, not which city you're in.
Furnace replacement by type: Hicksville vs Queens
We localize each furnace replacement type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Hicksville | Queens |
|---|---|---|
| Gas furnace | $4,800–$8,750 | $4,800–$8,750 |
| High-efficiency gas furnace | $4,300–$8,750 | $4,300–$8,750 |
| Electric furnace | $2,700–$5,800 | $2,700–$5,800 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
Furnace replacement by home size: Hicksville vs Queens
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Hicksville | Queens |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,700–$6,650 | $3,700–$6,650 |
| 1,500 sq ft (≈68,000 BTU) | $4,300–$7,650 | $4,300–$7,650 |
| 2,000 sq ft (≈90,000 BTU) | $4,900–$8,850 | $4,900–$8,850 |
| 2,500 sq ft (≈110,000 BTU) | $5,650–$10,100 | $5,650–$10,100 |
| 3,000 sq ft (≈130,000 BTU) | $6,400–$11,300 | $6,400–$11,300 |
| 3,500+ sq ft (≈150,000 BTU) | $7,150–$12,550 | $7,150–$12,550 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What hvac pros earn in each metro
With labor making up about 60% of a furnace replacement job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
HVAC demand collapses in the mild shoulder seasons, so installers discount to keep crews busy. The most expensive time to buy is during a heat wave or cold snap, when a dead system forces a full-price emergency replacement.
How much should you really budget for HVAC in 2026?
Ask five contractors for an HVAC quote and you'll get five different numbers — usually because they disagree on sizing, efficiency and equipment tier. Here's how our editors think through those trade-offs.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
Match the efficiency tier to your climate, insist on a real load calculation, and stack every rebate you qualify for. The expensive mistakes are wrong sizing and a rushed install — not picking the "wrong" brand.
Hicksville vs Queens
Is furnace replacement cheaper in Hicksville or Queens?
furnace replacement costs about the same in both — roughly $6,900 in each city.
Why does furnace replacement cost more in Queens than Hicksville?
Labor rates explain most of it — 1.14 in Queens vs 1.14 in Hicksville. A cold climate versus cold accounts for the rest.
How much is furnace replacement in Hicksville, NY?
Expect to pay $4,900 to $8,850 for furnace replacement in Hicksville in 2026, averaging around $6,900.
Do hvac pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $38.3/hr in New York-Newark-Jersey City compared with $38.3/hr in New York-Newark-Jersey City (BLS OEWS). Labor is about 60% of a furnace replacement job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy furnace replacement — and does it differ by city?
It doesn't vary by location — Spring and fall (Mar–May, Sep–Oct) is the discount window in both Hicksville and Queens (roughly 5–15% off), while peak summer and mid-winter tends to be the most expensive in either city.
Should I choose where to live based on furnace replacement cost?
Cost shouldn't be the deciding factor between Hicksville and Queens — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik