Furnace Replacement cost: Brooklyn vs Hicksville (2026)
Furnace replacement costs about the same in Brooklyn and Hicksville in 2026 — roughly $6,900 in each.
Brooklyn NY
Typically around $6,900
Hicksville NY
Typically around $6,900
Brooklyn vs Hicksville: full breakdown
| Factor | Brooklyn | Hicksville |
|---|---|---|
| Typical 2026 cost | $6,900 | $6,900 |
| Estimated range | $4,900–$8,850 | $4,900–$8,850 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | $250 | $250 |
| Labor share | $4,150 | $4,150 |
| Materials/equipment | $2,750 | $2,750 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
No real cost edge either way
Neither metro has a cost edge on furnace replacement — spend your decision-making energy on the contractor, not the location.
Furnace replacement by type: Brooklyn vs Hicksville
We localize each furnace replacement type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Brooklyn | Hicksville |
|---|---|---|
| Gas furnace | $4,800–$8,750 | $4,800–$8,750 |
| High-efficiency gas furnace | $4,300–$8,750 | $4,300–$8,750 |
| Electric furnace | $2,700–$5,800 | $2,700–$5,800 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
Furnace replacement by home size: Brooklyn vs Hicksville
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Brooklyn | Hicksville |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,700–$6,650 | $3,700–$6,650 |
| 1,500 sq ft (≈68,000 BTU) | $4,300–$7,650 | $4,300–$7,650 |
| 2,000 sq ft (≈90,000 BTU) | $4,900–$8,850 | $4,900–$8,850 |
| 2,500 sq ft (≈110,000 BTU) | $5,650–$10,100 | $5,650–$10,100 |
| 3,000 sq ft (≈130,000 BTU) | $6,400–$11,300 | $6,400–$11,300 |
| 3,500+ sq ft (≈150,000 BTU) | $7,150–$12,550 | $7,150–$12,550 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
What hvac pros earn in each metro
With labor making up about 60% of a furnace replacement job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
Why spring and fall are cheaper: contractors have open calendar space and compete harder for the work. Why summer and deep winter are expensive: a broken system in extreme weather isn't optional, so you lose your negotiating leverage.
How much should you really budget for HVAC in 2026?
Three factors move an HVAC quote more than anything else: how well it's sized, which efficiency tier you pick, and the brand markup. Our editors break down how they weigh each one.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The brand on the unit matters far less than getting the sizing and installation right. Insist on a Manual J calculation, match efficiency to your climate, and claim every rebate available.
Brooklyn vs Hicksville
Is furnace replacement cheaper in Brooklyn or Hicksville?
furnace replacement costs about the same in both — roughly $6,900 in each city.
Why does furnace replacement cost more in Hicksville than Brooklyn?
Labor rates explain most of it — 1.14 in Hicksville vs 1.14 in Brooklyn. A cold climate versus cold accounts for the rest.
How much is furnace replacement in Brooklyn, NY?
Expect to pay $4,900 to $8,850 for furnace replacement in Brooklyn in 2026, averaging around $6,900.
Do hvac pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $38.3/hr in New York-Newark-Jersey City compared with $38.3/hr in New York-Newark-Jersey City (BLS OEWS). Labor is about 60% of a furnace replacement job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy furnace replacement — and does it differ by city?
Timing doesn't change by city here — Spring and fall (Mar–May, Sep–Oct) is the cheapest window in both Brooklyn and Hicksville, saving roughly 5–15%. Avoid peak summer and mid-winter in either location, when emergency replacements push prices up.
Should I choose where to live based on furnace replacement cost?
Not on this basis — Brooklyn and Hicksville cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik