Furnace Replacement cost: Cordova vs New South Memphis (2026)
There's essentially no price gap here: furnace replacement runs close to $5,400 in both Cordova and New South Memphis in 2026.
Cordova TN
Typically around $5,400
New South Memphis TN
Typically around $5,400
Cordova vs New South Memphis: full breakdown
| Factor | Cordova | New South Memphis |
|---|---|---|
| Typical 2026 cost | $5,400 | $5,400 |
| Estimated range | $3,850–$6,900 | $3,850–$6,900 |
| Labor index (vs US) | ×0.96 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $200 | $200 |
| Labor share | $3,250 | $3,250 |
| Materials/equipment | $2,150 | $2,150 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
A wash — choose on quality, not city
Neither metro has a cost edge on furnace replacement — spend your decision-making energy on the contractor, not the location.
Furnace replacement by type: Cordova vs New South Memphis
We localize each furnace replacement type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Cordova | New South Memphis |
|---|---|---|
| Gas furnace | $3,750–$6,800 | $3,750–$6,800 |
| High-efficiency gas furnace | $3,350–$6,800 | $3,350–$6,800 |
| Electric furnace | $2,100–$4,500 | $2,100–$4,500 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
Furnace replacement by home size: Cordova vs New South Memphis
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Cordova | New South Memphis |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $2,900–$5,200 | $2,900–$5,200 |
| 1,500 sq ft (≈68,000 BTU) | $3,350–$5,950 | $3,350–$5,950 |
| 2,000 sq ft (≈90,000 BTU) | $3,850–$6,900 | $3,850–$6,900 |
| 2,500 sq ft (≈110,000 BTU) | $4,400–$7,850 | $4,400–$7,850 |
| 3,000 sq ft (≈130,000 BTU) | $5,000–$8,850 | $5,000–$8,850 |
| 3,500+ sq ft (≈150,000 BTU) | $5,550–$9,800 | $5,550–$9,800 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
What hvac pros earn in each metro
Since labor accounts for around 60% of what a furnace replacement job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Memphis metro · about 7% below the US average installer wage.
Memphis metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
A furnace or AC that dies mid-heat-wave gets replaced at whatever the on-call crew charges. One that gets swapped in April or October gets a competitive, unhurried quote instead.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The brand on the unit matters far less than getting the sizing and installation right. Insist on a Manual J calculation, match efficiency to your climate, and claim every rebate available.
Cordova vs New South Memphis
Is furnace replacement cheaper in Cordova or New South Memphis?
furnace replacement costs about the same in both — roughly $5,400 in each city.
Why does furnace replacement cost more in New South Memphis than Cordova?
Labor rates explain most of it — 0.96 in New South Memphis vs 0.96 in Cordova. A mixed climate versus mixed accounts for the rest.
How much is furnace replacement in Cordova, TN?
furnace replacement in Cordova runs $3,850–$6,900 as of 2026 — most jobs land near $5,400.
Do hvac pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $29/hr around Memphis versus $29/hr near Memphis. With labor making up about 60% of a furnace replacement job, that difference carries straight through to the final price.
When is the cheapest time to buy furnace replacement — and does it differ by city?
No, the seasonal pattern is the same in Cordova and New South Memphis: book during Spring and fall (Mar–May, Sep–Oct) for about 5–15% in savings. Peak summer and mid-winter is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on furnace replacement cost?
There's no cost argument here between Cordova and New South Memphis — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik