Furnace Replacement cost: Cordova vs Memphis (2026)
Furnace replacement costs about the same in Cordova and Memphis in 2026 — roughly $5,400 in each.
Cordova TN
Typically around $5,400
Memphis TN
Typically around $5,400
Cordova vs Memphis: full breakdown
| Factor | Cordova | Memphis |
|---|---|---|
| Typical 2026 cost | $5,400 | $5,400 |
| Estimated range | $3,850–$6,900 | $3,850–$6,900 |
| Labor index (vs US) | ×0.96 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $200 | $200 |
| Labor share | $3,250 | $3,250 |
| Materials/equipment | $2,150 | $2,150 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
A wash — choose on quality, not city
The two metros are effectively a wash for furnace replacement — pick on contractor quality and timing, not location.
Furnace replacement by type: Cordova vs Memphis
Each furnace replacement option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Cordova | Memphis |
|---|---|---|
| Gas furnace | $3,750–$6,800 | $3,750–$6,800 |
| High-efficiency gas furnace | $3,350–$6,800 | $3,350–$6,800 |
| Electric furnace | $2,100–$4,500 | $2,100–$4,500 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
Furnace replacement by home size: Cordova vs Memphis
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Cordova | Memphis |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $2,900–$5,200 | $2,900–$5,200 |
| 1,500 sq ft (≈68,000 BTU) | $3,350–$5,950 | $3,350–$5,950 |
| 2,000 sq ft (≈90,000 BTU) | $3,850–$6,900 | $3,850–$6,900 |
| 2,500 sq ft (≈110,000 BTU) | $4,400–$7,850 | $4,400–$7,850 |
| 3,000 sq ft (≈130,000 BTU) | $5,000–$8,850 | $5,000–$8,850 |
| 3,500+ sq ft (≈150,000 BTU) | $5,550–$9,800 | $5,550–$9,800 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
What hvac pros earn in each metro
With labor making up about 60% of a furnace replacement job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Memphis metro · about 7% below the US average installer wage.
Memphis metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
A furnace or AC that dies mid-heat-wave gets replaced at whatever the on-call crew charges. One that gets swapped in April or October gets a competitive, unhurried quote instead.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
Match the efficiency tier to your climate, insist on a real load calculation, and stack every rebate you qualify for. The expensive mistakes are wrong sizing and a rushed install — not picking the "wrong" brand.
Cordova vs Memphis
Is furnace replacement cheaper in Cordova or Memphis?
furnace replacement costs about the same in both — roughly $5,400 in each city.
Why does furnace replacement cost more in Memphis than Cordova?
The main driver is local labor rates: Memphis's labor index is 0.96 versus 0.96 in Cordova. Climate zone (mixed vs mixed) also shift the total.
How much is furnace replacement in Cordova, TN?
furnace replacement in Cordova runs $3,850–$6,900 as of 2026 — most jobs land near $5,400.
Do hvac pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $29/hr around Memphis versus $29/hr near Memphis. With labor making up about 60% of a furnace replacement job, that difference carries straight through to the final price.
When is the cheapest time to buy furnace replacement — and does it differ by city?
The best window is the same in both Cordova and Memphis: Spring and fall (Mar–May, Sep–Oct), when demand drops and installers discount to keep crews busy — typically 5–15% off peak pricing. The most expensive time anywhere is an emergency replacement during peak summer and mid-winter.
Should I choose where to live based on furnace replacement cost?
No — the cost is essentially identical between Cordova and Memphis. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik