Furnace Replacement cost: Centennial vs Denver (2026)
In 2026, Centennial and Denver land on nearly identical furnace replacement pricing — about $6,600 either way.
Centennial CO
Typically around $6,600
Denver CO
Typically around $6,600
Centennial vs Denver: full breakdown
| Factor | Centennial | Denver |
|---|---|---|
| Typical 2026 cost | $6,600 | $6,600 |
| Estimated range | $4,700–$8,450 | $4,700–$8,450 |
| Labor index (vs US) | ×1.09 | ×1.09 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | $225 | $225 |
| Labor share | $3,950 | $3,950 |
| Materials/equipment | $2,650 | $2,650 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
A wash — choose on quality, not city
This is a statistical tie on furnace replacement cost, so let contractor reputation and project timing decide, not geography.
Furnace replacement by type: Centennial vs Denver
We localize each furnace replacement type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Centennial | Denver |
|---|---|---|
| Gas furnace | $4,550–$8,350 | $4,550–$8,350 |
| High-efficiency gas furnace | $4,100–$8,350 | $4,100–$8,350 |
| Electric furnace | $2,600–$5,500 | $2,600–$5,500 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Furnace replacement by home size: Centennial vs Denver
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Centennial | Denver |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,500–$6,350 | $3,500–$6,350 |
| 1,500 sq ft (≈68,000 BTU) | $4,100–$7,300 | $4,100–$7,300 |
| 2,000 sq ft (≈90,000 BTU) | $4,700–$8,450 | $4,700–$8,450 |
| 2,500 sq ft (≈110,000 BTU) | $5,400–$9,650 | $5,400–$9,650 |
| 3,000 sq ft (≈130,000 BTU) | $6,100–$10,800 | $6,100–$10,800 |
| 3,500+ sq ft (≈150,000 BTU) | $6,800–$12,000 | $6,800–$12,000 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
What hvac pros earn in each metro
About 60% of a furnace replacement bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Denver-Aurora-Centennial metro · about 15% above the US average installer wage.
Denver-Aurora-Centennial metro · about 15% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
Demand for HVAC work falls off a cliff in the shoulder months, and contractors discount to keep their crews booked. Wait for a 100-degree day or a hard freeze, though, and you're paying emergency rates for a system that just quit.
How much should you really budget for HVAC in 2026?
Three factors move an HVAC quote more than anything else: how well it's sized, which efficiency tier you pick, and the brand markup. Our editors break down how they weigh each one.
The longevity case
The most expensive variable on the quote isn't the logo — it's whether the system is sized right and installed well. Oversize a premium unit and it short-cycles, wears fast and underperforms; commission a correctly sized mid-tier one and keep up the annual service, and it simply lasts longer. Spend on the installation, not the badge.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The budget-first case
In a temperate region the smart move is to size the job correctly with a Manual J and take the base efficiency tier. A system that spends most days coasting can't recover the cost of a high-SEER2 compressor, because the savings only show up under heavy load you don't put on it. Match the equipment to how little you actually run it, not to the brochure's top number.
The brand on the unit matters far less than getting the sizing and installation right. Insist on a Manual J calculation, match efficiency to your climate, and claim every rebate available.
Centennial vs Denver
Is furnace replacement cheaper in Centennial or Denver?
Practically identical — expect around $6,600 for furnace replacement whichever city you're in.
Why does furnace replacement cost more in Denver than Centennial?
The main driver is local labor rates: Denver's labor index is 1.09 versus 1.09 in Centennial. Climate zone (cold vs cold) also shift the total.
How much is furnace replacement in Centennial, CO?
Centennial homeowners can expect $4,700 to $8,450 for furnace replacement in 2026, with $6,600 the typical number.
Do hvac pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $35.7/hr in the Denver-Aurora-Centennial area versus $35.7/hr around Denver-Aurora-Centennial (BLS metro wage data). Since labor is roughly 60% of a furnace replacement job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy furnace replacement — and does it differ by city?
It doesn't vary by location — Spring and fall (Mar–May, Sep–Oct) is the discount window in both Centennial and Denver (roughly 5–15% off), while peak summer and mid-winter tends to be the most expensive in either city.
Should I choose where to live based on furnace replacement cost?
There's no cost argument here between Centennial and Denver — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik