Furnace Replacement cost: Cambridge vs Everett (2026)
There's essentially no price gap here: furnace replacement runs close to $6,900 in both Cambridge and Everett in 2026.
Cambridge MA
Typically around $6,900
Everett MA
Typically around $6,900
Cambridge vs Everett: full breakdown
| Factor | Cambridge | Everett |
|---|---|---|
| Typical 2026 cost | $6,900 | $6,900 |
| Estimated range | $4,950–$8,850 | $4,950–$8,850 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | $250 | $250 |
| Labor share | $4,150 | $4,150 |
| Materials/equipment | $2,750 | $2,750 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Basically a tie — focus on the contractor
The two metros are effectively a wash for furnace replacement — pick on contractor quality and timing, not location.
Furnace replacement by type: Cambridge vs Everett
Each furnace replacement option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Cambridge | Everett |
|---|---|---|
| Gas furnace | $4,800–$8,750 | $4,800–$8,750 |
| High-efficiency gas furnace | $4,300–$8,750 | $4,300–$8,750 |
| Electric furnace | $2,700–$5,800 | $2,700–$5,800 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
Furnace replacement by home size: Cambridge vs Everett
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Cambridge | Everett |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,700–$6,650 | $3,700–$6,650 |
| 1,500 sq ft (≈68,000 BTU) | $4,300–$7,650 | $4,300–$7,650 |
| 2,000 sq ft (≈90,000 BTU) | $4,950–$8,850 | $4,950–$8,850 |
| 2,500 sq ft (≈110,000 BTU) | $5,650–$10,100 | $5,650–$10,100 |
| 3,000 sq ft (≈130,000 BTU) | $6,400–$11,350 | $6,400–$11,350 |
| 3,500+ sq ft (≈150,000 BTU) | $7,150–$12,550 | $7,150–$12,550 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What hvac pros earn in each metro
Roughly 60% of what you pay for furnace replacement is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
HVAC demand collapses in the mild shoulder seasons, so installers discount to keep crews busy. The most expensive time to buy is during a heat wave or cold snap, when a dead system forces a full-price emergency replacement.
How much should you really budget for HVAC in 2026?
Ask five contractors for an HVAC quote and you'll get five different numbers — usually because they disagree on sizing, efficiency and equipment tier. Here's how our editors think through those trade-offs.
The budget-first case
In a temperate region the smart move is to size the job correctly with a Manual J and take the base efficiency tier. A system that spends most days coasting can't recover the cost of a high-SEER2 compressor, because the savings only show up under heavy load you don't put on it. Match the equipment to how little you actually run it, not to the brochure's top number.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
Get the sizing and the commissioning right and the brand debate mostly disappears. Insist on a Manual J, pick an efficiency tier your climate can justify, and pocket every incentive that still applies after the federal credits lapsed.
Cambridge vs Everett
Is furnace replacement cheaper in Cambridge or Everett?
furnace replacement costs about the same in both — roughly $6,900 in each city.
Why does furnace replacement cost more in Everett than Cambridge?
Labor rates explain most of it — 1.14 in Everett vs 1.14 in Cambridge. A cold climate versus cold accounts for the rest.
How much is furnace replacement in Cambridge, MA?
Cambridge homeowners can expect $4,950 to $8,850 for furnace replacement in 2026, with $6,900 the typical number.
Do hvac pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $38.4/hr around Boston-Cambridge-Newton versus $38.4/hr near Boston-Cambridge-Newton. With labor making up about 60% of a furnace replacement job, that difference carries straight through to the final price.
When is the cheapest time to buy furnace replacement — and does it differ by city?
No, the seasonal pattern is the same in Cambridge and Everett: book during Spring and fall (Mar–May, Sep–Oct) for about 5–15% in savings. Peak summer and mid-winter is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on furnace replacement cost?
Not on this basis — Cambridge and Everett cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik