Everett, MA Furnace Replacement Cost (2026): $4,950

Refine your estimate

Tune it to your home to narrow the furnace replacement range.

Home size2,000 sq ft

800 sq ft4,500 sq ft

Quality tier

Conditions & add-ons

Your adjusted estimate

$4,950 – $8,850

Most likely $6,900

Key takeaways for Everett

Priced about 28% above the national average, furnace replacement in Everett spans $4,950 to $8,850 — figure $6,900 for a standard job.
Labor is the swing factor here: Everett trades bill +12% relative to the national average.
The estimate already covers the HVAC permit — roughly $250 in Everett.
Count on 15–30 years from a solid install; timing the next job yourself avoids the emergency premium.
Skip peak pricing by scheduling in Spring and fall (Mar–May, Sep–Oct); the shift is worth about 5–15%.
Federal 25C/25D tax credits and local utility rebates can lower the net cost — see the rebates section below.

Price breakdown

What goes into the price in Everett

A typical Everett furnace replacement of $6,900 breaks down roughly like this — materials priced near the national level, labor set by local rates.

Line item	Everett 2026 range
Materials & equipmentThe unit and materials — largely the same cost no matter which city you're in.	$1,900 – $3,450
Labor & installationRemoval, install and startup labor — the line most affected by where you live.	$2,800 – $5,150
Permit & feesHVAC permit cost, adjusted to this city's rate.	$250
Total installed cost	$4,950 – $8,850

Split from the Everett estimate using a 60% local-labor share; line items sum to the total.

Local factors

Why furnace replacement costs what it does in Everett

Labor in Everett runs about 12% above the national average (based on price levels for the Boston-Cambridge-Newton metro area), which raises the installed price.
Because Everett sits in a cold climate zone, furnace replacement costs run about 8% higher than a neutral-climate baseline.
Everett's HVAC permit runs roughly $250, which is already part of the number above.

Cold snaps routinely drop a heat pump below its balance point for days, which means heating capacity, not cooling, decides value for furnace replacement. Prioritise a high-efficiency, properly-sized unit that can hold temperature through sustained sub-freezing spells, and confirm insulation and sealing first.

By size

Furnace Replacement cost by home size in Everett

Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.

home size	Everett 2026 range
1,000 sq ft (≈45,000 BTU)	$3,700 – $6,650
1,500 sq ft (≈68,000 BTU)	$4,300 – $7,650
2,000 sq ft (≈90,000 BTU)	$4,950 – $8,850
2,500 sq ft (≈110,000 BTU)	$5,650 – $10,100
3,000 sq ft (≈130,000 BTU)	$6,400 – $11,350
3,500+ sq ft (≈150,000 BTU)	$7,150 – $12,550

National size ranges localized to Everett labor and climate.

By type

Furnace Replacement cost by type in Everett

Gas furnace	$4,800 – $8,750
High-efficiency gas furnace	$4,300 – $8,750
Electric furnace	$2,700 – $5,800

Adjusted to Everett from national type-level ranges.

By efficiency

Furnace Replacement cost by efficiency in Everett

Efficiency is measured in AFUE — the percentage of fuel turned into heat. Higher AFUE costs more upfront but cuts fuel bills, and in cold (northern) regions the DOE requires ≥95% AFUE gas furnaces.

80% AFUE (standard)Lowest upfront; fine in mild climates	$3,950 – $7,000
90–95% AFUE (high-efficiency)Best all-round value in most regions	$4,950 – $8,850
96%+ AFUE (condensing, premium)Lowest fuel bills; required in cold zones	$6,400 – $11,950

Where the money goes

Labor vs. materials in Everett

Labor (60%)

≈ $4,150

Install crew, removal, permit & startup — the part Everett rates move most.

Materials (40%)

≈ $2,750

Equipment & materials — priced closer to the national level.

Split based on a typical $6,900 Everett project; your mix varies with scope.

Skilled installers in the Boston-Cambridge-Newton area earn about $38.4/hr (23% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your furnace replacement cost.

Methodology

How we estimate it

National range	$3,800 – $7,000
Everett labor adjustment	×1.14
cold climate factor	×1.08
Local permit	+$250
Everett estimate	$4,950 – $8,850

Typical 2026

$6,900

Range

$4,950 – $8,850

Climate

cold

Local permit

$250

Promo prices vs. the real cost

Ads for HVAC work often lead with a number that has little to do with a finished install. The figures below are what that number actually buys:

Service call / diagnostic fee$75–$150
Seasonal tune-up promo$79–$129
"Free" replacement estimate$0 — it's a sales visit
Financing offers$0 down · 0% APR, 12–60 mo

Hidden costs

Additional furnace replacement costs to budget for

Only a handful of these will touch your total. Which ones depend on what's already in place and how the crew has to reach it.

Old furnace removal & disposal	$50 – $330
New ductwork (vs. repair $300–$1,500)Only if ducts are missing or failing	$1,000 – $5,000
Gas line run or upgrade	$250 – $800
Chimney liner (for high-efficiency venting)	$600 – $2,500
Smart thermostat	$150 – $500

Typical national add-on ranges; confirm locally during your quote.

What's included

Removal and disposal of the old unit
The furnace unit and burner assembly
Installation labor and basic ductwork connections
Thermostat connection and system startup/testing

What affects the cost

Fuel type (gas vs electric) and AFUE efficiency rating
Whether a chimney liner or new gas line is required
Heating capacity (BTU) needed for your square footage
Condition of existing ductwork and venting

Ways to save on furnace replacement in Everett

Look for utility rebates on high-efficiency models
Schedule in the off-season (spring/summer) for better rates
Right-size the unit; oversizing wastes money and cycles hard
Get at least 3 quotes — installed prices vary widely

Lifespan

How long does furnace replacement last in Everett?

Expected lifespan

15–30 years

Gas furnaces typically last 15–20 years; well-maintained units can reach 30.

Annual maintenance

$70–$300/yr

An annual tune-up keeps efficiency up and protects the warranty.

When to replace

Signs you need furnace replacement in Everett

The furnace is 15+ years old (near or past its service life)
Heating bills keep climbing despite no change in usage
Some rooms are warm while others stay cold (uneven heating)
Frequent repairs — you've called for service more than once or twice recently
Banging, rattling or screeching noises on startup
A yellow or flickering burner flame instead of steady blue (have it checked immediately)
More dust, dryness, or a stale smell when the heat runs

Decision

Repair or replace in Everett?

The $5,000 rule: multiply the repair quote by the furnace's age in years. If it tops $5,000, replacement is usually the smarter spend.

Repair if…

The unit is under ~10 years old and otherwise efficient
The fix is a single inexpensive part (igniter, flame sensor, capacitor)
It's still under manufacturer warranty

Replace if…

It's 15+ years old and needs a major part
The heat exchanger is cracked (a safety issue — replace, don't repair)
The repair costs more than about half of a new system
It's an 80% AFUE unit and your fuel bills are high in a cold climate

Rebates & incentives in Massachusetts

HEAR live

Most 2026 rebates reward switching to a heat pump, not a like-for-like gas furnace. Replacing a gas furnace, your savings are mainly utility efficiency rebates (high-AFUE models) — but pricing out a heat pump often qualifies you for far larger rebates.

Mass Save — Heat Pumps ↗Massachusetts utilities
Up to $10,000 for a whole-home heat pump (no income limit) plus 0% HEAT Loan financing.

Status: Mass Save rebates are utility-funded and run year-round; the income-based HEAR top-up launched in 2025.

The federal 25C tax credit (up to $2,000 for heat pumps; $600 for high-efficiency AC or furnaces) and the 25D credit ended December 31, 2025 under the One Big Beautiful Bill Act — neither is available for 2026 installs. The remaining federal help is the IRA Home Electrification & Appliance Rebates (HEAR): up to $8,000 toward a heat pump for households under 150% of area median income, paid at point of sale where a state has launched its program.

Verified July 2026. Rebate budgets deplete and program windows change fast — confirm current amounts and eligibility with your utility and the DSIRE database before you budget. Costadia does not administer these programs.

Best time to buy

Cheapest time for furnace replacement in Everett

Why spring and fall are cheaper: contractors have open calendar space and compete harder for the work. Why summer and deep winter are expensive: a broken system in extreme weather isn't optional, so you lose your negotiating leverage.

Best window

Spring and fall (Mar–May, Sep–Oct)

Avoid

Peak summer and mid-winter

Off-peak savings

5–15%

Plan the swap opposite the season it's used in — AC before summer, furnace before winter — and you'll have the leverage to actually compare prices.

Reading your quotes

Why furnace replacement quotes vary — and how to compare them fairly

Price differences on an identical job trace back to the assumptions each contractor made; understand those and the 'expensive' bid often turns out fair.

Why a quote looks high (or low)

Brand, warranty length and whether startup/commissioning is included all move the number.
Sizing was guessed from square footage instead of a Manual J load calculation, so the equipment is wrong.
One quote bundles ductwork, electrical, permit and old-unit removal; another quietly leaves them out.

Get an apples-to-apples bid

Require an itemized quote splitting equipment, labor, permit and add-ons.
Insist on a Manual J load calculation, not a square-footage guess.
Ask every bidder for the same SEER2/AFUE rating so you compare like for like.
Get at least three written bids before you sign.

Hiring

Questions to ask Everett HVAC pros

The only honest way to compare is to hold every quote to one checklist. Start with these.

1Did you run a Manual J load calculation to size the system, or estimate from square footage?
2What AFUE/SEER2 rating is this unit, and what's the payback vs. the next tier up?
3Is removal of the old equipment, the permit, and startup testing included in the quote?
4Will my existing ductwork and venting work as-is, or is repair/resizing needed?
5What's covered under the labor warranty vs. the manufacturer's parts warranty?

FAQ

Furnace Replacement in Everett

How much does furnace replacement cost in Everett, MA?

furnace replacement in Everett runs $4,950–$8,850 as of 2026, with $6,900 the figure most homeowners actually land on. Why that specific number? It reflects Everett labor rates, cold-climate demands and permit fees rather than a flat national figure.

Is furnace replacement more expensive in Everett than average?

Put Everett next to the national picture and it lands about 28% higher than the national average; the labor index of 1.14 explains the bulk of it. and the local HVAC permit costs about $250.

Do I need a permit for furnace replacement in Everett?

The estimate above already covers the HVAC permit Everett generally requires for this job, so the $250 or so it costs won't land as a surprise.

What affects furnace replacement cost the most?

Replacing a residential furnace, including the unit and installation labor. Price swings mostly come down to equipment or material grade, the size and complexity of the home, local labor, and the cold climate zone.

Editors' roundtable

How much should you really budget for HVAC in 2026?

An HVAC budget isn't one number — it's a set of trade-offs between sizing accuracy, efficiency tier and brand. Our editors walk through how each one moves the price.

The efficiency-first case

In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.

The budget-first case

Run a Manual J load calculation, then buy the standard tier — 80% AFUE, 14.3 SEER2 — and stop there. Where summers are short and winters are gentle, the equipment idles most of the year, so premium efficiency never gets enough runtime to earn back its price. Paying for SEER2 you'll rarely tap is the classic way a mild-climate homeowner overspends.

The longevity case

The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.

Our take

Match the efficiency tier to your climate, insist on a real load calculation, and stack every rebate you qualify for. The expensive mistakes are wrong sizing and a rushed install — not picking the "wrong" brand.

Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.

How we calculated this estimate

We start with 2026 national furnace replacement ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Everett using the BLS metro wage data labor index (×1.14 here), the IECC cold-climate factor (×1.08) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.

This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.

By Serhat ÖzçelikReviewed by Costadia EditorialUpdated June 2026Sources: BLS · BEA · IECC · IRS · DSIRE · industry cost data

References & data sources

Our Everett furnace replacement estimate is built from these primary, mostly government sources — not a single aggregator.

Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.