Furnace Replacement cost: Beverly Cove vs Worcester (2026)
Beverly Cove runs 10% higher than Worcester for furnace replacement — expect around $6,900 in Beverly Cove against $6,250 in Worcester, a difference of about $650.
Beverly Cove MA
Typically around $6,900
Worcester MA
Lower costTypically around $6,250
Beverly Cove vs Worcester: full breakdown
| Factor | Beverly Cove | Worcester |
|---|---|---|
| Typical 2026 cost | $6,900 | $6,250 |
| Estimated range | $4,950–$8,850 | $4,450–$8,000 |
| Labor index (vs US) | ×1.14 | ×1.03 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | $250 | $225 |
| Labor share | $4,150 | $3,750 |
| Materials/equipment | $2,750 | $2,500 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
Is the price difference a dealbreaker?
A 10% gap is meaningful on a project this size — about $650. That's real money, but it's often within reach of off-season timing and a tighter apples-to-apples bid in Beverly Cove.
Furnace replacement by type: Beverly Cove vs Worcester
Each furnace replacement option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Beverly Cove | Worcester |
|---|---|---|
| Gas furnace | $4,800–$8,750 | $4,350–$7,900 |
| High-efficiency gas furnace | $4,300–$8,750 | $3,900–$7,900 |
| Electric furnace | $2,700–$5,800 | $2,450–$5,250 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Furnace replacement by home size: Beverly Cove vs Worcester
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Beverly Cove | Worcester |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,700–$6,650 | $3,350–$6,000 |
| 1,500 sq ft (≈68,000 BTU) | $4,300–$7,650 | $3,900–$6,900 |
| 2,000 sq ft (≈90,000 BTU) | $4,950–$8,850 | $4,450–$8,000 |
| 2,500 sq ft (≈110,000 BTU) | $5,650–$10,100 | $5,100–$9,100 |
| 3,000 sq ft (≈130,000 BTU) | $6,400–$11,350 | $5,800–$10,250 |
| 3,500+ sq ft (≈150,000 BTU) | $7,150–$12,550 | $6,450–$11,350 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
What hvac pros earn in each metro
With labor making up about 60% of a furnace replacement job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
No BLS metro wage series for Worcester; we use Massachusetts regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
A furnace or AC that dies mid-heat-wave gets replaced at whatever the on-call crew charges. One that gets swapped in April or October gets a competitive, unhurried quote instead.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The brand on the unit matters far less than getting the sizing and installation right. Insist on a Manual J calculation, match efficiency to your climate, and claim every rebate available.
Beverly Cove vs Worcester
Is furnace replacement cheaper in Beverly Cove or Worcester?
In 2026, furnace replacement is cheaper in Worcester at about $6,250, versus $6,900 in Beverly Cove — a difference of about $650 (10%).
Why does furnace replacement cost more in Beverly Cove than Worcester?
Beverly Cove's higher labor index (1.14 vs 1.03 in Worcester) is the biggest factor, with the cold/cold climate split and permit fee differences playing a smaller role.
How much is furnace replacement in Beverly Cove, MA?
In Beverly Cove, furnace replacement typically runs $4,950–$8,850 in 2026, with most homeowners paying around $6,900.
When is the cheapest time to buy furnace replacement — and does it differ by city?
The best window is the same in both Beverly Cove and Worcester: Spring and fall (Mar–May, Sep–Oct), when demand drops and installers discount to keep crews busy — typically 5–15% off peak pricing. The most expensive time anywhere is an emergency replacement during peak summer and mid-winter.
Should I choose where to live based on furnace replacement cost?
Rarely. The $650 difference is real but one-time, and you can often close most of it in Beverly Cove by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik