Furnace Replacement cost: Beaumont vs San Antonio (2026)
Furnace replacement costs about the same in Beaumont and San Antonio in 2026 — roughly $5,050 in each.
Beaumont TX
Typically around $5,050
San Antonio TX
Typically around $5,050
Beaumont vs San Antonio: full breakdown
| Factor | Beaumont | San Antonio |
|---|---|---|
| Typical 2026 cost | $5,050 | $5,050 |
| Estimated range | $3,600–$6,500 | $3,600–$6,500 |
| Labor index (vs US) | ×0.95 | ×0.95 |
| Climate zone | Hot | Hot |
| Climate factor | ×0.95 | ×0.95 |
| Local permit | $200 | $200 |
| Labor share | $3,050 | $3,050 |
| Materials/equipment | $2,000 | $2,000 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
A wash — choose on quality, not city
With no real price gap on furnace replacement, the choice comes down to contractor quality and timing, not which city you're in.
Furnace replacement by type: Beaumont vs San Antonio
We localize each furnace replacement type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Beaumont | San Antonio |
|---|---|---|
| Gas furnace | $3,550–$6,400 | $3,550–$6,400 |
| High-efficiency gas furnace | $3,150–$6,400 | $3,150–$6,400 |
| Electric furnace | $2,000–$4,250 | $2,000–$4,250 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
Furnace replacement by home size: Beaumont vs San Antonio
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Beaumont | San Antonio |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $2,700–$4,850 | $2,700–$4,900 |
| 1,500 sq ft (≈68,000 BTU) | $3,150–$5,600 | $3,150–$5,600 |
| 2,000 sq ft (≈90,000 BTU) | $3,600–$6,500 | $3,600–$6,500 |
| 2,500 sq ft (≈110,000 BTU) | $4,150–$7,400 | $4,150–$7,400 |
| 3,000 sq ft (≈130,000 BTU) | $4,700–$8,300 | $4,700–$8,300 |
| 3,500+ sq ft (≈150,000 BTU) | $5,250–$9,200 | $5,250–$9,200 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What hvac pros earn in each metro
Labor is about 60% of a furnace replacement bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
No BLS metro wage series for Beaumont; we use Texas regional price parity instead.
San Antonio-New Braunfels metro · about 9% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
HVAC demand collapses in the mild shoulder seasons, so installers discount to keep crews busy. The most expensive time to buy is during a heat wave or cold snap, when a dead system forces a full-price emergency replacement.
How much should you really budget for HVAC in 2026?
What you pay for HVAC hinges less on the badge than on how the quote is built — the load calculation behind it, the efficiency tier, and the markup. Our take on where each one lands.
The longevity case
The most expensive variable on the quote isn't the logo — it's whether the system is sized right and installed well. Oversize a premium unit and it short-cycles, wears fast and underperforms; commission a correctly sized mid-tier one and keep up the annual service, and it simply lasts longer. Spend on the installation, not the badge.
The efficiency-first case
Where you face brutal summers or hard winters, a higher SEER2/AFUE system or a heat pump runs enough hours to claw back its premium through lower bills — and utility or state rebates can still trim the sticker even though the federal 25C/25D credits closed at the end of 2025. Do the payback arithmetic before you reach for the cheapest box on the lot.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
If there's one takeaway, it's this: sizing and install quality decide whether an HVAC system performs, not the badge on the box. Get the load calculation right, match efficiency to climate, and take the rebates on offer.
Beaumont vs San Antonio
Is furnace replacement cheaper in Beaumont or San Antonio?
Not really — both cities land at almost the same number for furnace replacement, around $5,050 each.
Why does furnace replacement cost more in San Antonio than Beaumont?
It comes down to labor: San Antonio indexes at 0.95 against Beaumont's 0.95. The hot-vs-hot climate difference adds to the gap.
How much is furnace replacement in Beaumont, TX?
furnace replacement in Beaumont runs $3,600–$6,500 as of 2026 — most jobs land near $5,050.
When is the cheapest time to buy furnace replacement — and does it differ by city?
No, the seasonal pattern is the same in Beaumont and San Antonio: book during Spring and fall (Mar–May, Sep–Oct) for about 5–15% in savings. Peak summer and mid-winter is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on furnace replacement cost?
Not on this basis — Beaumont and San Antonio cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik