Furnace Replacement cost: Beaumont vs Dallas (2026)
The two metros aren't quite in sync on furnace replacement: Beaumont sits 4% below Dallas, or roughly $5,050 versus $5,250 — about $200 apart.
Beaumont TX
Lower costTypically around $5,050
Dallas TX
Typically around $5,250
Beaumont vs Dallas: full breakdown
| Factor | Beaumont | Dallas |
|---|---|---|
| Typical 2026 cost | $5,050 | $5,250 |
| Estimated range | $3,600–$6,500 | $3,750–$6,700 |
| Labor index (vs US) | ×0.95 | ×0.97 |
| Climate zone | Hot | Hot |
| Climate factor | ×0.95 | ×0.95 |
| Local permit | $200 | $225 |
| Labor share | $3,050 | $3,150 |
| Materials/equipment | $2,000 | $2,100 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
Is the gap worth worrying about?
4% is within noise for furnace replacement — contractor selection and timing move the price more than which of these two metros you're in.
Furnace replacement by type: Beaumont vs Dallas
Each furnace replacement option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Beaumont | Dallas |
|---|---|---|
| Gas furnace | $3,550–$6,400 | $3,650–$6,600 |
| High-efficiency gas furnace | $3,150–$6,400 | $3,250–$6,600 |
| Electric furnace | $2,000–$4,250 | $2,050–$4,400 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
Furnace replacement by home size: Beaumont vs Dallas
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Beaumont | Dallas |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $2,700–$4,850 | $2,800–$5,050 |
| 1,500 sq ft (≈68,000 BTU) | $3,150–$5,600 | $3,250–$5,750 |
| 2,000 sq ft (≈90,000 BTU) | $3,600–$6,500 | $3,750–$6,700 |
| 2,500 sq ft (≈110,000 BTU) | $4,150–$7,400 | $4,300–$7,600 |
| 3,000 sq ft (≈130,000 BTU) | $4,700–$8,300 | $4,850–$8,550 |
| 3,500+ sq ft (≈150,000 BTU) | $5,250–$9,200 | $5,400–$9,450 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
What hvac pros earn in each metro
About 60% of a furnace replacement bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
No BLS metro wage series for Beaumont; we use Texas regional price parity instead.
Dallas-Fort Worth-Arlington metro · about 5% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
HVAC demand collapses in the mild shoulder seasons, so installers discount to keep crews busy. The most expensive time to buy is during a heat wave or cold snap, when a dead system forces a full-price emergency replacement.
How much should you really budget for HVAC in 2026?
Ask five contractors for an HVAC quote and you'll get five different numbers — usually because they disagree on sizing, efficiency and equipment tier. Here's how our editors think through those trade-offs.
The longevity case
Brand is a footnote; sizing and install quality write the story. A right-sized mid-tier system that's properly commissioned and serviced once a year will outlive an oversized premium unit that short-cycles itself to an early grave. Put the money into the crew and the setup rather than the nameplate.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The budget-first case
In a temperate region the smart move is to size the job correctly with a Manual J and take the base efficiency tier. A system that spends most days coasting can't recover the cost of a high-SEER2 compressor, because the savings only show up under heavy load you don't put on it. Match the equipment to how little you actually run it, not to the brochure's top number.
Match the efficiency tier to your climate, insist on a real load calculation, and stack every rebate you qualify for. The expensive mistakes are wrong sizing and a rushed install — not picking the "wrong" brand.
Beaumont vs Dallas
Is furnace replacement cheaper in Beaumont or Dallas?
Yes — Dallas costs more. Expect around $5,250 for furnace replacement there against $5,050 in Beaumont, about $200 (4%) apart in 2026.
Why does furnace replacement cost more in Dallas than Beaumont?
The main driver is local labor rates: Dallas's labor index is 0.97 versus 0.95 in Beaumont. Climate zone (hot vs hot) and permit fees also shift the total.
How much is furnace replacement in Beaumont, TX?
In Beaumont, furnace replacement typically runs $3,600–$6,500 in 2026, with most homeowners paying around $5,050.
When is the cheapest time to buy furnace replacement — and does it differ by city?
The best window is the same in both Beaumont and Dallas: Spring and fall (Mar–May, Sep–Oct), when demand drops and installers discount to keep crews busy — typically 5–15% off peak pricing. The most expensive time anywhere is an emergency replacement during peak summer and mid-winter.
Should I choose where to live based on furnace replacement cost?
That would be a stretch. $200 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Dallas can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik