Attic Insulation cost: Murray vs Salt Lake City (2026)
Attic insulation costs about the same in Murray and Salt Lake City in 2026 — roughly $4,000 in each.
Murray UT
Typically around $4,000
Salt Lake City UT
Typically around $4,000
Murray vs Salt Lake City: full breakdown
| Factor | Murray | Salt Lake City |
|---|---|---|
| Typical 2026 cost | $4,000 | $4,000 |
| Estimated range | $1,600–$6,350 | $1,600–$6,350 |
| Labor index (vs US) | ×0.98 | ×0.98 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | None | None |
| Labor share | $2,200 | $2,200 |
| Materials/equipment | $1,800 | $1,800 |
These are 2026 planning figures for attic insulation, localized to each city — not formal quotes.
A wash — choose on quality, not city
With no real price gap on attic insulation, the choice comes down to contractor quality and timing, not which city you're in.
Attic insulation by type: Murray vs Salt Lake City
Every attic insulation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Murray | Salt Lake City |
|---|---|---|
| Fiberglass batts | $1,600–$4,250 | $1,600–$4,250 |
| Blown-in fiberglass | $1,600–$4,750 | $1,600–$4,750 |
| Blown cellulose | $1,800–$5,300 | $1,800–$5,300 |
| Spray foam | $3,700–$9,550 | $3,700–$9,550 |
Attic insulation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Attic insulation by area: Murray vs Salt Lake City
Attic insulation is priced by the square foot of attic floor, typically $1–$7 per sq ft installed depending on material and how deep you build the R-value. Blown-in is cheapest; spray foam costs the most.
| Size | Murray | Salt Lake City |
|---|---|---|
| 500 sq ft | $750–$2,350 | $750–$2,350 |
| 1,000 sq ft | $1,250–$3,700 | $1,250–$3,700 |
| 1,500 sq ft | $1,900–$5,300 | $1,900–$5,300 |
| 2,000+ sq ft | $2,550–$6,900 | $2,550–$6,900 |
All figures are 2026 localized planning estimates for attic insulation — get an actual quote before you commit.
What insulation pros earn in each metro
Roughly 55% of what you pay for attic insulation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for attic insulation in either city
Everyone waits until fall to insulate, which is exactly why fall costs the most. Spring and summer are quieter for installers and often catch a fresh year's rebate budget before it runs dry.
How much insulation is worth paying for?
Insulation is one of the few home upgrades where spending more can genuinely pay for itself. Our editors on the choices that decide both cost and payback.
The R-value case
The DOE publishes a target R-value for every climate zone, and there's a reason to reach it: stopping short shaves a little off install day but forfeits years of lower energy bills and steadier indoor temperatures. Under-insulating is the one shortcut here that never actually pays.
The air-sealing case
Insulation without air-sealing underperforms. Sealing leaks first is cheap and often delivers more comfort per dollar than thicker insulation alone — make sure it's in the scope.
The rebate case
Insulation carries some of the strongest incentive money in remodeling, with utility and state rebates covering a real portion of the cost since the federal 25C credit expired at the end of 2025. Look up what applies on DSIRE, then schedule the work while rebate funds are still unclaimed for the year.
Hit the DOE R-value for your zone, air-seal first, and stack the rebates. Insulation is one of the few upgrades where doing it fully is also the cheapest path to payback.
Murray vs Salt Lake City
Is attic insulation cheaper in Murray or Salt Lake City?
There's no meaningful difference: attic insulation runs about $4,000 in both places.
Why does attic insulation cost more in Salt Lake City than Murray?
The main driver is local labor rates: Salt Lake City's labor index is 0.98 versus 0.98 in Murray. Climate zone (cold vs cold) also shift the total.
How much is attic insulation in Murray, UT?
attic insulation in Murray runs $1,600–$6,350 as of 2026 — most jobs land near $4,000.
Do insulation pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $30.1/hr in the Salt Lake City-Murray area and $30.1/hr in Salt Lake City-Murray. Given labor is around 55% of a attic insulation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy attic insulation — and does it differ by city?
It doesn't vary by location — Spring and summer is the discount window in both Murray and Salt Lake City (roughly 5–10% off), while the pre-winter fall rush tends to be the most expensive in either city.
Should I choose where to live based on attic insulation cost?
No — the cost is essentially identical between Murray and Salt Lake City. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare attic insulation in other cities
Updated June 2026 · By Serhat Özçelik