Attic Insulation cost: Murray vs Orem (2026)
In 2026, attic insulation is about 1% more expensive in Murray than in Orem. Most homeowners pay around $4,000 in Murray versus $3,950 in Orem — a gap of roughly $50.
Murray UT
Typically around $4,000
Orem UT
Lower costTypically around $3,950
Murray vs Orem: full breakdown
| Factor | Murray | Orem |
|---|---|---|
| Typical 2026 cost | $4,000 | $3,950 |
| Estimated range | $1,600–$6,350 | $1,600–$6,300 |
| Labor index (vs US) | ×0.98 | ×0.97 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | None | None |
| Labor share | $2,200 | $2,150 |
| Materials/equipment | $1,800 | $1,800 |
All figures are 2026 localized planning estimates for attic insulation — get an actual quote before you commit.
Is the gap worth worrying about?
At 1%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for attic insulation — focus on the contractor, not the city.
Attic insulation by type: Murray vs Orem
Every attic insulation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Murray | Orem |
|---|---|---|
| Fiberglass batts | $1,600–$4,250 | $1,600–$4,200 |
| Blown-in fiberglass | $1,600–$4,750 | $1,600–$4,750 |
| Blown cellulose | $1,800–$5,300 | $1,800–$5,250 |
| Spray foam | $3,700–$9,550 | $3,700–$9,450 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national attic insulation range for local labor, climate and permits.
Attic insulation by area: Murray vs Orem
Attic insulation is priced by the square foot of attic floor, typically $1–$7 per sq ft installed depending on material and how deep you build the R-value. Blown-in is cheapest; spray foam costs the most.
| Size | Murray | Orem |
|---|---|---|
| 500 sq ft | $750–$2,350 | $750–$2,300 |
| 1,000 sq ft | $1,250–$3,700 | $1,250–$3,700 |
| 1,500 sq ft | $1,900–$5,300 | $1,900–$5,250 |
| 2,000+ sq ft | $2,550–$6,900 | $2,500–$6,850 |
All figures are 2026 localized planning estimates for attic insulation — get an actual quote before you commit.
What insulation pros earn in each metro
With labor making up about 55% of a attic insulation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
No BLS metro wage series for Orem; we use Utah regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for attic insulation in either city
Everyone insulates in fall before winter, so that's the busy, full-price season. Booking in spring or summer catches off-peak pricing — and utility rebate budgets are often freshest early in the year.
How much insulation is worth paying for?
How much you spend on insulation and how fast it pays back come down to R-value, air-sealing and material. Our editors break down the trade-offs.
The air-sealing case
Insulation without air-sealing underperforms. Sealing leaks first is cheap and often delivers more comfort per dollar than thicker insulation alone — make sure it's in the scope.
The R-value case
The DOE publishes a target R-value for every climate zone, and there's a reason to reach it: stopping short shaves a little off install day but forfeits years of lower energy bills and steadier indoor temperatures. Under-insulating is the one shortcut here that never actually pays.
The rebate case
Few home projects come with rebate support like insulation does — utility and state programs routinely offset a meaningful slice of the bill (the federal 25C credit closed in December 2025). Run your address through DSIRE first, and book when a program's yearly budget has just refilled.
Don't half-do an insulation job to save money upfront: seal the air leaks first, insulate to the DOE target for your zone, and stack the rebates. The full scope pays back faster than the partial one.
Murray vs Orem
Is attic insulation cheaper in Murray or Orem?
Orem comes out ahead here, at roughly $3,950 for attic insulation compared with $4,000 in Murray — a 1% ($50) gap as of 2026.
Why does attic insulation cost more in Murray than Orem?
Murray's higher labor index (0.98 vs 0.97 in Orem) is the biggest factor, with the cold/cold climate split playing a smaller role.
How much is attic insulation in Murray, UT?
Murray homeowners can expect $1,600 to $6,350 for attic insulation in 2026, with $4,000 the typical number.
When is the cheapest time to buy attic insulation — and does it differ by city?
No, the seasonal pattern is the same in Murray and Orem: book during Spring and summer for about 5–10% in savings. The pre-winter fall rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on attic insulation cost?
Rarely. The $50 difference is real but one-time, and you can often close most of it in Murray by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare attic insulation in other cities
Updated June 2026 · By Serhat Özçelik