Attic Insulation cost: Murray vs Provo (2026)
In 2026, attic insulation is about 1% more expensive in Murray than in Provo. Most homeowners pay around $4,000 in Murray versus $3,950 in Provo — a gap of roughly $50.
Murray UT
Typically around $4,000
Provo UT
Lower costTypically around $3,950
Murray vs Provo: full breakdown
| Factor | Murray | Provo |
|---|---|---|
| Typical 2026 cost | $4,000 | $3,950 |
| Estimated range | $1,600–$6,350 | $1,600–$6,300 |
| Labor index (vs US) | ×0.98 | ×0.97 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | None | None |
| Labor share | $2,200 | $2,150 |
| Materials/equipment | $1,800 | $1,800 |
All figures are 2026 localized planning estimates for attic insulation — get an actual quote before you commit.
Is the price difference a dealbreaker?
That 1% gap is small — for attic insulation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Attic insulation by type: Murray vs Provo
Every attic insulation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Murray | Provo |
|---|---|---|
| Fiberglass batts | $1,600–$4,250 | $1,600–$4,200 |
| Blown-in fiberglass | $1,600–$4,750 | $1,600–$4,750 |
| Blown cellulose | $1,800–$5,300 | $1,800–$5,250 |
| Spray foam | $3,700–$9,550 | $3,700–$9,450 |
Treat these as 2026 localized estimates for attic insulation, not quotes from a contractor.
Attic insulation by area: Murray vs Provo
Attic insulation is priced by the square foot of attic floor, typically $1–$7 per sq ft installed depending on material and how deep you build the R-value. Blown-in is cheapest; spray foam costs the most.
| Size | Murray | Provo |
|---|---|---|
| 500 sq ft | $750–$2,350 | $750–$2,300 |
| 1,000 sq ft | $1,250–$3,700 | $1,250–$3,700 |
| 1,500 sq ft | $1,900–$5,300 | $1,900–$5,250 |
| 2,000+ sq ft | $2,550–$6,900 | $2,500–$6,850 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national attic insulation range for local labor, climate and permits.
What insulation pros earn in each metro
Since labor accounts for around 55% of what a attic insulation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
No BLS metro wage series for Provo; we use Utah regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for attic insulation in either city
Fall is when everyone rushes to insulate before winter hits, making it the busiest and priciest season. Spring and summer see far less demand — and utility rebate budgets are often still full that early in the year.
How much insulation is worth paying for?
Three choices shape an insulation budget — target R-value, whether air-sealing is included, and material type. Our editors weigh how each affects payback.
The rebate case
Insulation has some of the best rebate math in home improvement — utility and state programs can cover a solid share (the federal 25C credits ended Dec 2025). Check DSIRE before you book and time it to a fresh rebate budget.
The air-sealing case
Skip air-sealing and you're insulating around the very holes letting conditioned air leak out. Caulk, foam and weatherstripping are inexpensive and often return more felt comfort than a thicker blanket of insulation ever would — insist the crew handles the leaks before they bury them.
The R-value case
The DOE publishes a target R-value for every climate zone, and there's a reason to reach it: stopping short shaves a little off install day but forfeits years of lower energy bills and steadier indoor temperatures. Under-insulating is the one shortcut here that never actually pays.
What makes insulation unusual is that the thorough version and the cheap version are the same version — seal first, meet the DOE R-value for your zone, and layer on the rebates. A partial job just pushes the payback date further out.
Murray vs Provo
Is attic insulation cheaper in Murray or Provo?
In 2026, attic insulation is cheaper in Provo at about $3,950, versus $4,000 in Murray — a difference of about $50 (1%).
Why does attic insulation cost more in Murray than Provo?
Murray's higher labor index (0.98 vs 0.97 in Provo) is the biggest factor, with the cold/cold climate split playing a smaller role.
How much is attic insulation in Murray, UT?
Expect to pay $1,600 to $6,350 for attic insulation in Murray in 2026, averaging around $4,000.
When is the cheapest time to buy attic insulation — and does it differ by city?
The best window is the same in both Murray and Provo: Spring and summer, when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during the pre-winter fall rush.
Should I choose where to live based on attic insulation cost?
Probably not. Yes, $50 is a real gap, but it's a one-time cost you can partly offset in Murray with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare attic insulation in other cities
Updated June 2026 · By Serhat Özçelik