Murfreesboro, TN Tile Roof Installation Cost (2026): $10,400

Refine your estimate

Tune it to your home to narrow the tile roof installation range.

Roof / home size2,000 sq ft

800 sq ft4,500 sq ft

Quality tier

Conditions & add-ons

Your adjusted estimate

$10,400 – $24,450

Most likely $17,450

Key takeaways for Murfreesboro

A tile roof installation in Murfreesboro typically runs $10,400–$24,450, with most homeowners paying about $17,450 — about 2% below the national average.
Local labor in Murfreesboro is −3% relative to the national average, which is what pushes this estimate away from the countrywide number.
A Roofing permit in Murfreesboro runs about $275 — it's already folded into the estimate above.
50 to 100 years is the usual service life, so budget for the next one before it fails.
Skip peak pricing by scheduling in Late spring to early fall (dry, 45–85°F); the shift is worth about 5–10%.

Price breakdown

What goes into the price in Murfreesboro

A typical Murfreesboro tile roof installation of $17,450 breaks down roughly like this — materials priced near the national level, labor set by local rates.

Line item	Murfreesboro 2026 range
Materials & equipmentThe equipment and materials themselves — this part barely shifts by location.	$4,050 – $9,650
Labor & installationLabor to remove the old system and install the new one — this is where your city's wage index shows up.	$6,075 – $14,525
Permit & feesWhat this city's building department charges for a Roofing permit.	$275
Total installed cost	$10,400 – $24,450

Split from the Murfreesboro estimate using a 60% local-labor share; line items sum to the total.

Local factors

Why tile roof installation costs what it does in Murfreesboro

Labor in Murfreesboro runs about 3% below the national average (based on price levels for the Nashville-Davidson--Murfreesboro--Franklin metro area), which lowers the installed price.
A Roofing permit in Murfreesboro costs around $275, included above.

Both moisture and temperature swings matter here, quality underlayment and ventilation matter for tile roof installation here because the roof has to handle both wet and temperature-swing conditions. There's no single dominant risk here, so a well-rounded roofing spec — good underlayment, good ventilation — is the safer bet.

By size

Tile Roof Installation cost by roof size in Murfreesboro

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

roof size	Murfreesboro 2026 range
1,000 sq ft (10 squares)	$7,050 – $13,800
1,500 sq ft (15 squares)	$8,950 – $18,650
2,000 sq ft (20 squares)	$10,400 – $24,450
2,500 sq ft (25 squares)	$12,850 – $29,250
3,000+ sq ft (30 squares)	$15,750 – $35,050

National size ranges localized to Murfreesboro labor and climate.

By type

Tile Roof Installation cost by type in Murfreesboro

Concrete tile	$10,450 – $20,650
Clay / terracotta tile	$13,850 – $27,450
Slate	$19,700 – $48,800

Adjusted to Murfreesboro from national type-level ranges.

By efficiency

Tile Roof Installation cost by efficiency in Murfreesboro

Concrete is the affordable workhorse; clay (terracotta) holds its color and resists fade in hot, sunny climates; slate is the premium natural-stone option with the longest life.

Concrete tileLowest-cost tile; heavy; ~50 yr life	$10,400 – $19,600
Clay / terracotta tileFade-resistant, ideal in hot/coastal climates; 50–100 yr	$13,800 – $24,450
Natural slatePremium stone; 75–100+ yr life	$19,600 – $43,750

Where the money goes

Labor vs. materials in Murfreesboro

Labor (60%)

≈ $10,450

Install crew, removal, permit & startup — the part Murfreesboro rates move most.

Materials (40%)

≈ $7,000

Equipment & materials — priced closer to the national level.

Split based on a typical $17,450 Murfreesboro project; your mix varies with scope.

Skilled installers in the Nashville-Davidson--Murfreesboro--Franklin area earn about $29.4/hr (6% below the US average, per BLS metro wage data) — the local wage is what moves the labor half of your tile roof installation cost.

Methodology

How we estimate it

National range	$10,500 – $25,000
Murfreesboro labor adjustment	×0.97
mixed climate factor	×1
Local permit	+$275
Murfreesboro estimate	$10,400 – $24,450

Typical 2026

$17,450

Range

$10,400 – $24,450

Climate

mixed

Local permit

$275

Promo prices vs. the real cost

A headline roofing price means little without a defined scope — these are the numbers marketing tends to lean on:

Financing offers$0 down · low APR
Per-square teaser priceadvertised low; varies by pitch & material
Free roof inspection$0 — it's a sales visit

Hidden costs

Additional tile roof installation costs to budget for

Only a handful of these will touch your total. Which ones depend on what's already in place and how the crew has to reach it.

Tear-off & disposal of old roofTile is heavy — disposal costs more than asphalt	$1,000 – $4,000
Structural reinforcement for tile weightOften required; tile is much heavier than asphalt	$1,000 – $10,000
Decking / sheathing repair	$500 – $3,000
Underlayment (high-grade, replaced mid-life)Underlayment wears out before the tile and is re-done	$500 – $2,500
Flashing, valleys & ridge work	$500 – $2,500
Permit	$200 – $600

Typical national add-on ranges; confirm locally during your quote.

What's included

Reinforced underlayment and battens
Labor, cleanup and permit
Tear-off and structural check
Concrete or clay tiles

What affects the cost

Pitch, complexity and hip/valley count
Roof structure may need reinforcement for tile weight
Concrete vs clay tile
Specialty flashing and ridge work

Ways to save on tile roof installation in Murfreesboro

Confirm framing can carry the load before buying
Concrete tile costs less than clay with similar life
Tiles last 50+ years — strong lifetime value
Reuse intact tiles where possible on repairs

Lifespan

How long does tile roof installation last in Murfreesboro?

Expected lifespan

50–100 years

Concrete tile lasts ~50 years; clay and slate 75–100+. The underlayment beneath is usually replaced once mid-life.

Annual maintenance

$150–$500/yr

Inspect for cracked or slipped tiles and clear debris; the bigger periodic cost is replacing worn underlayment.

When to replace

Signs you need tile roof installation in Murfreesboro

Cracked, chipped, or broken tiles after hail, foot traffic, or freeze-thaw
Slipped or missing tiles leaving gaps in the field
Leaks or attic moisture pointing to failed underlayment beneath sound tiles
Efflorescence, deep staining, or flaking on the tile surface
Sagging areas — a sign the structure is straining under the weight
Failed flashing in valleys or around penetrations

Decision

Repair or replace in Murfreesboro?

Tiles outlive the underlayment beneath them. If tiles are intact, a 'lift-and-relay' (re-felt with the same tiles) costs far less than a full replacement — reserve full replacement for widespread tile failure or structural problems.

Repair if…

Only a handful of tiles are cracked or slipped
The underlayment is still sound and leaks are isolated
Flashing has failed but tiles and structure are fine

Replace if…

The underlayment has failed across the roof (consider a lift-and-relay first)
Widespread tile cracking or fading from age or hail
The roof structure is sagging or can't support the load

Cost calculator

Roof cost by material in Murfreesboro, TN

Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Murfreesboro, TN labor; the last column is what each material costs per year of life — often the real deciding number.

Roof size (squares · 100 sq ft each)

Material	Lifespan	Total (20 sq)	Per year of life
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph.	25–30 yr	$6,800–$11,650	$350/yr
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered.	20–30 yr	$7,750–$15,500	$450/yr
Standing-seam metal High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph.	40–70 yr	$17,450–$31,050	$450/yr
Clay / concrete tileThis page Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph.	50–75 yr	$19,400–$38,800	$450/yr

Per-square ranges are national installed benchmarks localized to Murfreesboro, TN labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.

Best time to buy

Cheapest time for tile roof installation in Murfreesboro

Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.

Best window

Late spring to early fall (dry, 45–85°F)

Avoid

Mid-winter and the post-storm rush

Off-peak savings

5–10%

Lock in a spring appointment while roofers are quiet in winter — and if a hailstorm just hit your area, wait a few weeks before calling, since that's peak-price season.

Reading your quotes

Why tile roof installation quotes vary — and how to compare them fairly

Two contractors can price the same job thousands apart. Almost always it's the scope each assumed — here's what drives the gap and how to close it.

Why a quote looks high (or low)

Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.

Get an apples-to-apples bid

Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
Compare the workmanship warranty, not just the material warranty.
Ask how deck/sheathing repairs are priced if rot is found.
Specify tear-off vs. overlay so all bids match.

Hiring

Questions to ask Murfreesboro Roofing pros

Before you pick, make each contractor answer the same things — gaps in their replies tell you as much as the price.

1Is a full tear-off included, or are you laying over the existing roof?
2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
3What underlayment, ice-and-water shield, and ventilation are included?
4Are you licensed and insured here, and can you share recent local references?
5What's the workmanship warranty, and how does it interact with the material warranty?

FAQ

Tile Roof Installation in Murfreesboro

How much does tile roof installation cost in Murfreesboro, TN?

In Murfreesboro, tile roof installation typically costs $10,400 to $24,450 in 2026, with most homeowners paying around $17,450. That range already accounts for Murfreesboro's labor rates, its mixed climate and local permit costs.

Is tile roof installation more expensive in Murfreesboro than average?

Why the gap? Murfreesboro prices about 2% lower than the national average, and local labor — indexed at 0.97 against the US average — does most of the work., before the Roofing permit, which runs about $275.

Do I need a permit for tile roof installation in Murfreesboro?

Do you need a permit? For this work in Murfreesboro, yes — a Roofing permit at roughly $275, and the estimate above already carries it.

What affects tile roof installation cost the most?

Here's the short version: installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates. Expect equipment/material grade, home size and complexity, local labor rates and the mixed climate zone to matter most here.

Editors' roundtable

Where does a smart roofing budget go in 2026?

The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

Our take

Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.

Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.

How we calculated this estimate

We start with 2026 national tile roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Murfreesboro using the BLS metro wage data labor index (×0.97 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$275). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.

This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.

By Serhat ÖzçelikReviewed by Costadia EditorialUpdated June 2026Sources: BLS · BEA · IECC · IRS · DSIRE · industry cost data

References & data sources

Our Murfreesboro tile roof installation estimate is built from these primary, mostly government sources — not a single aggregator.

Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.