HVAC · Murfreesboro, TN
How much does furnace replacement cost in Murfreesboro, TN? (2026)
In Murfreesboro, furnace replacement runs $3,900–$7,000, with most paying around $5,450 — about 1% above the national average. Replacing a residential furnace, including the unit and installation labor.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $5,450
- Typical cost
- $5,450
- Labor vs US
- −3%
- Climate
- Mixed
- Local permit
- $225
Refine your estimate
Tune it to your home to narrow the furnace replacement range.
Key takeaways for Murfreesboro
- In Murfreesboro, furnace replacement runs $3,900–$7,000 — call it $5,450 for a typical job, about 1% above the national average.
- This estimate departs from the national number mainly because Murfreesboro labor sits −3% versus the US average.
- Budget about $225 for the local HVAC permit; it's already included above.
- 15 to 30 years is the usual service life, so budget for the next one before it fails.
- Roughly 5–15% comes off when you book in Spring and fall (Mar–May, Sep–Oct) instead of peak season.
- What you actually pay may drop below this range once 25C/25D credits and local utility rebates apply — details are in the rebates section.
What goes into the price in Murfreesboro
A typical Murfreesboro furnace replacement of $5,450 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Murfreesboro 2026 range |
|---|---|
| Materials & equipmentHardware and supplies for the job; national pricing applies almost everywhere you go. | $1,450 – $2,700 |
| Labor & installationThe installation work itself — removal, setup and startup — is what your city's labor rate actually moves. | $2,225 – $4,075 |
| Permit & feesWhat this city's building department charges for a HVAC permit. | $225 |
| Total installed cost | $3,900 – $7,000 |
Split from the Murfreesboro estimate using a 60% local-labor share; line items sum to the total.
Why furnace replacement costs what it does in Murfreesboro
- Labor in Murfreesboro runs about 3% below the national average (based on price levels for the Nashville-Davidson--Murfreesboro--Franklin metro area), which lowers the installed price.
- Murfreesboro's HVAC permit runs roughly $225, which is already part of the number above.
Furnace Replacement cost by home size in Murfreesboro
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| home size | Murfreesboro 2026 range |
|---|---|
| 1,000 sq ft (≈45,000 BTU) | $2,950 – $5,250 |
| 1,500 sq ft (≈68,000 BTU) | $3,400 – $6,000 |
| 2,000 sq ft (≈90,000 BTU) | $3,900 – $7,000 |
| 2,500 sq ft (≈110,000 BTU) | $4,500 – $7,950 |
| 3,000 sq ft (≈130,000 BTU) | $5,050 – $8,900 |
| 3,500+ sq ft (≈150,000 BTU) | $5,650 – $9,900 |
National size ranges localized to Murfreesboro labor and climate.
Furnace Replacement cost by type in Murfreesboro
| Gas furnace | $3,800 – $6,900 |
| High-efficiency gas furnace | $3,450 – $6,900 |
| Electric furnace | $2,150 – $4,600 |
Adjusted to Murfreesboro from national type-level ranges.
Furnace Replacement cost by efficiency in Murfreesboro
Efficiency is measured in AFUE — the percentage of fuel turned into heat. Higher AFUE costs more upfront but cuts fuel bills, and in cold (northern) regions the DOE requires ≥95% AFUE gas furnaces.
| 80% AFUE (standard)Lowest upfront; fine in mild climates | $3,100 – $5,550 |
| 90–95% AFUE (high-efficiency)Best all-round value in most regions | $3,900 – $7,000 |
| 96%+ AFUE (condensing, premium)Lowest fuel bills; required in cold zones | $5,050 – $9,400 |
Labor vs. materials in Murfreesboro
Install crew, removal, permit & startup — the part Murfreesboro rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $5,450 Murfreesboro project; your mix varies with scope.
Skilled installers in the Nashville-Davidson--Murfreesboro--Franklin area earn about $29.4/hr (6% below the US average, per BLS metro wage data) — the local wage is what moves the labor half of your furnace replacement cost.
How we estimate it
| National range | $3,800 – $7,000 |
| Murfreesboro labor adjustment | ×0.97 |
| mixed climate factor | ×1 |
| Local permit | +$225 |
| Murfreesboro estimate | $3,900 – $7,000 |
Promo prices vs. the real cost
That eye-catching install price in the ad is bait for a service visit, not the cost of a finished system — set it beside the real installed estimate above:
- "Free" replacement estimate$0 — it's a sales visit
- Service call / diagnostic fee$75–$150
- Financing offers$0 down · 0% APR, 12–60 mo
- Seasonal tune-up promo$79–$129
Additional furnace replacement costs to budget for
None of these are a given. What you actually pay hinges on the condition of the current system and how hard the site is to work in.
| Old furnace removal & disposal | $50 – $330 |
| New ductwork (vs. repair $300–$1,500)Only if ducts are missing or failing | $1,000 – $5,000 |
| Gas line run or upgrade | $250 – $800 |
| Chimney liner (for high-efficiency venting) | $600 – $2,500 |
| Smart thermostat | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Installation labor and basic ductwork connections
- The furnace unit and burner assembly
- Removal and disposal of the old unit
- Thermostat connection and system startup/testing
What affects the cost
- Fuel type (gas vs electric) and AFUE efficiency rating
- Heating capacity (BTU) needed for your square footage
- Whether a chimney liner or new gas line is required
- Condition of existing ductwork and venting
Ways to save on furnace replacement in Murfreesboro
- Right-size the unit; oversizing wastes money and cycles hard
- Look for utility rebates on high-efficiency models
- Get at least 3 quotes — installed prices vary widely
- Schedule in the off-season (spring/summer) for better rates
How long does furnace replacement last in Murfreesboro?
Gas furnaces typically last 15–20 years; well-maintained units can reach 30.
An annual tune-up keeps efficiency up and protects the warranty.
Signs you need furnace replacement in Murfreesboro
- The furnace is 15+ years old (near or past its service life)
- Heating bills keep climbing despite no change in usage
- Some rooms are warm while others stay cold (uneven heating)
- Frequent repairs — you've called for service more than once or twice recently
- Banging, rattling or screeching noises on startup
- A yellow or flickering burner flame instead of steady blue (have it checked immediately)
- More dust, dryness, or a stale smell when the heat runs
Repair or replace in Murfreesboro?
Repair if…
- The unit is under ~10 years old and otherwise efficient
- The fix is a single inexpensive part (igniter, flame sensor, capacitor)
- It's still under manufacturer warranty
Replace if…
- It's 15+ years old and needs a major part
- The heat exchanger is cracked (a safety issue — replace, don't repair)
- The repair costs more than about half of a new system
- It's an 80% AFUE unit and your fuel bills are high in a cold climate
Rebates & incentives in Tennessee
Most 2026 rebates reward switching to a heat pump, not a like-for-like gas furnace. Replacing a gas furnace, your savings are mainly utility efficiency rebates (high-AFUE models) — but pricing out a heat pump often qualifies you for far larger rebates.
The federal 25C tax credit (up to $2,000 for heat pumps; $600 for high-efficiency AC or furnaces) and the 25D credit ended December 31, 2025 under the One Big Beautiful Bill Act — neither is available for 2026 installs. The remaining federal help is the IRA Home Electrification & Appliance Rebates (HEAR): up to $8,000 toward a heat pump for households under 150% of area median income, paid at point of sale where a state has launched its program.
Verified July 2026. Rebate budgets deplete and program windows change fast — confirm current amounts and eligibility with your utility and the DSIRE database before you budget. Costadia does not administer these programs.
Cheapest time for furnace replacement in Murfreesboro
A furnace or AC that dies mid-heat-wave gets replaced at whatever the on-call crew charges. One that gets swapped in April or October gets a competitive, unhurried quote instead.
Why furnace replacement quotes vary — and how to compare them fairly
When two quotes for one project diverge by thousands, the cause is usually what each one includes, not markup — here's how to read the difference.
Why a quote looks high (or low)
- Brand, warranty length and whether startup/commissioning is included all move the number.
- Sizing was guessed from square footage instead of a Manual J load calculation, so the equipment is wrong.
- Equipment tier isn't matched — a 14.3 SEER2 bid will always undercut an 18 SEER2 one for the "same" job.
Get an apples-to-apples bid
- Get at least three written bids before you sign.
- Ask every bidder for the same SEER2/AFUE rating so you compare like for like.
- Insist on a Manual J load calculation, not a square-footage guess.
- Confirm old-unit removal, the permit and startup testing are all included.
Questions to ask Murfreesboro HVAC pros
Quotes only compare cleanly when every bidder is pricing the same work — put these to each of them before you commit.
- 1Did you run a Manual J load calculation to size the system, or estimate from square footage?
- 2What AFUE/SEER2 rating is this unit, and what's the payback vs. the next tier up?
- 3Is removal of the old equipment, the permit, and startup testing included in the quote?
- 4Will my existing ductwork and venting work as-is, or is repair/resizing needed?
- 5What's covered under the labor warranty vs. the manufacturer's parts warranty?
Furnace Replacement in Murfreesboro
How much does furnace replacement cost in Murfreesboro, TN?
Expect to pay $3,900 to $7,000 for furnace replacement in Murfreesboro in 2026 — most quotes cluster around $5,450. That's not a national average — it's adjusted for Murfreesboro labor rates, mixed-climate factors and permit fees.
Is furnace replacement more expensive in Murfreesboro than average?
Put Murfreesboro next to the national picture and it lands about 1% higher than the national average; the labor index of 0.97 explains the bulk of it., before the HVAC permit, which runs about $225.
Do I need a permit for furnace replacement in Murfreesboro?
The estimate above already covers the HVAC permit Murfreesboro generally requires for this job, so the $225 or so it costs won't land as a surprise.
What affects furnace replacement cost the most?
Start with the fundamentals — replacing a residential furnace, including the unit and installation labor. What moves the price most: equipment or material grade, your home's size and complexity, local labor rates, and the mixed climate zone.
How much should you really budget for HVAC in 2026?
Ask five contractors for an HVAC quote and you'll get five different numbers — usually because they disagree on sizing, efficiency and equipment tier. Here's how our editors think through those trade-offs.
The longevity case
The most expensive variable on the quote isn't the logo — it's whether the system is sized right and installed well. Oversize a premium unit and it short-cycles, wears fast and underperforms; commission a correctly sized mid-tier one and keep up the annual service, and it simply lasts longer. Spend on the installation, not the badge.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
Climate decides the efficiency tier; a proper load calculation decides everything else. Nail both, stack the rebates you can, and you've sidestepped the two mistakes — wrong size, rushed install — that actually inflate the lifetime cost.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national furnace replacement ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Murfreesboro using the BLS metro wage data labor index (×0.97 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$225). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Murfreesboro furnace replacement estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Furnace replacement alternatives in Murfreesboro
Often done together with furnace replacement in Murfreesboro
Bundling these shares labor and setup — and a single visit.
Homeowners in Murfreesboro often pair this with
A furnace replacement rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Murfreesboro
Browse local 2026 costs for every home project in Murfreesboro, TN.