Metal Roof Installation cost in Texas (2026)
Across Texas, metal roof installation varies by your city's labor rates, climate and permit fees. Select your city below for a localized estimate.
metal roof installation typically falls in this range across 83 Texas cities — your exact estimate depends on local rates.
| Largest cities in Texas | Typical 2026 range |
|---|---|
| Houston, TX | $13,100 – $29,900 |
| San Antonio, TX | $12,950 – $29,550 |
| Dallas, TX | $13,300 – $30,350 |
| Austin, TX | $13,550 – $30,950 |
| Fort Worth, TX | $13,300 – $30,350 |
| El Paso, TX | $11,700 – $26,700 |
| Arlington, TX | $13,300 – $30,350 |
| Corpus Christi, TX | $13,100 – $29,850 |
| Plano, TX | $11,850 – $27,050 |
| Laredo, TX | $12,850 – $29,300 |
| Lubbock, TX | $12,900 – $29,500 |
| Garland, TX | $13,300 – $30,350 |
| Irving, TX | $13,300 – $30,350 |
| Amarillo, TX | $13,000 – $29,650 |
| Grand Prairie, TX | $13,300 – $30,350 |
| Brownsville, TX | $12,450 – $28,350 |
| Pasadena, TX | $13,100 – $29,900 |
| McKinney, TX | $11,850 – $27,050 |
| Mesquite, TX | $13,300 – $30,350 |
| Killeen, TX | $12,900 – $29,500 |
| Frisco, TX | $11,850 – $27,050 |
| McAllen, TX | $11,850 – $27,050 |
| Waco, TX | $13,100 – $29,850 |
| Carrollton, TX | $13,300 – $30,350 |
| Midland, TX | $13,350 – $30,450 |
| Denton, TX | $11,850 – $27,050 |
| Abilene, TX | $13,000 – $29,650 |
| Beaumont, TX | $12,900 – $29,500 |
| Odessa, TX | $13,200 – $30,050 |
| Round Rock, TX | $13,550 – $30,950 |
Showing the 30 largest cities of 83 in Texas. Every Texas city is covered — open any city above to see nearby Texas cities too.
Metal Roof Installation cost by type in Texas
Typical 2026 ranges, localized to Texas labor, climate and permits.
| Type | Texas 2026 range |
|---|---|
| Corrugated steel (exposed fastener) | $9,150 – $18,050 |
| Standing-seam steel | $18,050 – $34,850 |
| Aluminum | $14,100 – $27,950 |
| Copper | $29,900 – $59,550 |
| Zinc | $27,950 – $54,600 |
Cheapest time for metal roof installation in Texas
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Cost calculator
Roof cost by material in Texas
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Texas labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,700–$11,500 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,700–$15,350 | $450/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,300–$30,700 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,200–$38,400 | $450/yr |
Per-square ranges are national installed benchmarks localized to Texas labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Metal Roof Installation in Texas
How much does metal roof installation cost in Texas?
Across Texas, metal roof installation typically runs $11,700–$30,950 in 2026, depending on your city's labor rates, climate and permit fees. El Paso is the most affordable (around $19,200) and Pflugerville the most expensive (around $22,250).
Which Texas city is cheapest for metal roof installation?
El Paso has the lowest typical metal roof installation cost in Texas at about $19,200, while Pflugerville is the highest at about $22,250 — a gap driven mostly by local labor rates.
How do other Roofing options compare in Texas?
In Houston, Texas's largest market, metal roof installation typically runs $13,100–$29,900. For comparison, asphalt shingle roof replacement runs $5,850–$12,000, tile roof installation runs $10,850–$25,450, flat roof replacement runs $5,150–$14,950. Each option has its own Texas cost guide with city-by-city pricing.
Why does metal roof installation cost vary across Texas?
The three levers are local labor rates, climate zone and permit fees. In this hot, high-UV region, heat and sun resistance drive metal roof installation value, so reflective or light-coloured materials and strong ventilation reduce attic heat and extend roof life. Reflective or light-coloured materials plus strong attic ventilation extend roof life meaningfully in this climate.
When is the cheapest time to replace in Texas?
The best window is late spring to early fall (dry, 45–85°f), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The priciest time is an emergency job during mid-winter and the post-storm rush.
Does Texas require a permit for metal roof installation?
Most Texas cities require a permit for metal roof installation; it typically adds around $275 and is already included in the estimates above.
Other Roofing projects in Texas
Weighing your options? Typical 2026 ranges below are localized to Houston, Texas's largest market — open any project for the full statewide breakdown.