Roofing · Arlington, TX
How much does metal roof installation cost in Arlington, TX? (2026)
In Arlington, metal roof installation runs $13,300–$30,350, with most paying around $21,850 — about 2% above the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $21,850
- Typical cost
- $21,850
- Labor vs US
- +3%
- Climate
- Hot
- Local permit
- $300
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Arlington
- $13,300 on the low end, $30,350 on the high — metal roof installation in Arlington averages $21,850, about 2% above the national average.
- The +3% gap between Arlington and national labor rates is the single biggest reason this price isn't the national average.
- Permit costs are baked in: Arlington charges about $300 for the Roofing permit.
- Service life runs 40–70 years on average; replacing on your schedule beats replacing on an emergency one.
- Late spring to early fall (dry, 45–85°F) is the low-price window — about 5–10% under peak rates.
What goes into the price in Arlington
A typical Arlington metal roof installation of $21,850 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Arlington 2026 range |
|---|---|
| Materials & equipmentEquipment and supplies, which price out close to the national baseline. | $5,200 – $12,000 |
| Labor & installationThe installation work itself — removal, setup and startup — is what your city's labor rate actually moves. | $7,800 – $18,050 |
| Permit & feesThe Roofing permit fee for this metro, based on local rates. | $300 |
| Total installed cost | $13,300 – $30,350 |
Split from the Arlington estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Arlington
- Expect labor here to run 3% above the national norm (based on price levels for the Dallas-Fort Worth-Arlington metro area) — that's what raises the total.
- The hot climate in Arlington adds roughly 3% to typical metal roof installation pricing versus a neutral climate.
- A Roofing permit in Arlington costs around $300, included above.
Metal Roof Installation cost by roof size in Arlington
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Arlington 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $8,300 – $16,300 |
| 1,500 sq ft (15 squares) | $11,300 – $23,300 |
| 2,000 sq ft (20 squares) | $13,300 – $30,350 |
| 2,500 sq ft (25 squares) | $16,300 – $36,350 |
| 3,000+ sq ft (30 squares) | $19,300 – $42,350 |
National size ranges localized to Arlington labor and climate.
Metal Roof Installation cost by type in Arlington
| Corrugated steel (exposed fastener) | $9,300 – $18,300 |
| Standing-seam steel | $18,300 – $35,250 |
| Aluminum | $14,300 – $28,250 |
| Copper | $30,250 – $60,250 |
| Zinc | $28,250 – $55,250 |
Adjusted to Arlington from national type-level ranges.
Metal Roof Installation cost by efficiency in Arlington
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $8,300 – $18,300 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $13,300 – $30,350 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $25,300 – $50,350 |
Labor vs. materials in Arlington
Install crew, removal, permit & startup — the part Arlington rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $21,850 Arlington project; your mix varies with scope.
Skilled installers in the Dallas-Fort Worth-Arlington area earn about $29.7/hr (5% below the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Arlington labor adjustment | ×0.97 |
| hot climate factor | ×1.03 |
| Local permit | +$300 |
| Arlington estimate | $13,300 – $30,350 |
Promo prices vs. the real cost
A headline roofing price means little without a defined scope — these are the numbers marketing tends to lean on:
- Financing offers$0 down · low APR
- Free roof inspection$0 — it's a sales visit
- Per-square teaser priceadvertised low; varies by pitch & material
Additional metal roof installation costs to budget for
None of these are a given. What you actually pay hinges on the condition of the current system and how hard the site is to work in.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Tear-off of the old roof
- Labor, cleanup and permit
- Underlayment, fasteners and trim
- Metal panels or standing-seam system
What affects the cost
- Panel type (exposed-fastener vs standing seam)
- Roof complexity and number of penetrations
- Metal: steel, aluminum, copper or zinc
- Whether existing roof can be overlaid
Ways to save on metal roof installation in Arlington
- Some insurers discount metal and impact-rated roofs
- Compare lifetime cost, not just the install price
- Metal's 40–70 yr life lowers lifetime cost
- Steel standing seam balances cost and longevity
How long does metal roof installation last in Arlington?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Arlington
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Arlington?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Arlington, TX
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Arlington, TX labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,800–$11,650 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,750–$15,500 | $450/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,450–$31,050 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,400–$38,800 | $450/yr |
Per-square ranges are national installed benchmarks localized to Arlington, TX labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Arlington
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Why metal roof installation quotes vary — and how to compare them fairly
Price differences on an identical job trace back to the assumptions each contractor made; understand those and the 'expensive' bid often turns out fair.
Why a quote looks high (or low)
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
Get an apples-to-apples bid
- Specify tear-off vs. overlay so all bids match.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Ask how deck/sheathing repairs are priced if rot is found.
- Verify the contractor is licensed, insured and local, with recent references.
Questions to ask Arlington Roofing pros
Quotes only compare cleanly when every bidder is pricing the same work — put these to each of them before you commit.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Arlington
How much does metal roof installation cost in Arlington, TX?
The low end sits near $13,300 and the high end near $30,350 for metal roof installation in Arlington this 2026, with $21,850 the common middle. That's not a national average — it's adjusted for Arlington labor rates, hot-climate factors and permit fees.
Is metal roof installation more expensive in Arlington than average?
Compared with the rest of the country, Arlington runs about 2% higher than the national average — local labor prices at an index of 0.97 against the US average., plus a local Roofing permit running about $300.
Do I need a permit for metal roof installation in Arlington?
Budget about $300 for the Roofing permit most Arlington jobs like this require — and note it already sits inside the estimate above, not on top of it.
What affects metal roof installation cost the most?
Worth knowing first: installing a metal roof — higher upfront cost, long lifespan and strong durability. Grade of equipment and materials tops the list, followed by home size and complexity, local labor, and the hot climate zone.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Arlington using the BLS metro wage data labor index (×0.97 here), the IECC hot-climate factor (×1.03) and a typical local permit fee (≈$300). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Arlington metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Arlington
Homeowners in Arlington often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Arlington
Browse local 2026 costs for every home project in Arlington, TX.