Roofing · North Hollywood, CA
How much does metal roof installation cost in North Hollywood, CA? (2026)
In North Hollywood, metal roof installation runs $14,500–$33,050, with most paying around $23,800 — about 11% above the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $23,800
- Typical cost
- $23,800
- Labor vs US
- +13%
- Climate
- Mixed
- Local permit
- $325
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for North Hollywood
- North Hollywood homeowners typically pay $14,500–$33,050 for metal roof installation, with $23,800 the usual landing spot — about 11% above the national average.
- The +13% gap between North Hollywood and national labor rates is the single biggest reason this price isn't the national average.
- Budget about $325 for the local Roofing permit; it's already included above.
- A well-installed job here typically lasts 40–70 years — plan the next replacement instead of waiting for an emergency one.
- Booking during Late spring to early fall (dry, 45–85°F) typically saves about 5–10% versus peak-season pricing.
What goes into the price in North Hollywood
A typical North Hollywood metal roof installation of $23,800 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | North Hollywood 2026 range |
|---|---|
| Materials & equipmentThe equipment and materials themselves — this part barely shifts by location. | $5,650 – $13,100 |
| Labor & installationThe installation work itself — removal, setup and startup — is what your city's labor rate actually moves. | $8,525 – $19,625 |
| Permit & feesTypical local Roofing permit, scaled to this metro. | $325 |
| Total installed cost | $14,500 – $33,050 |
Split from the North Hollywood estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in North Hollywood
- North Hollywood's labor rates sit about 13% higher than the national average (based on price levels for the Los Angeles-Long Beach-Anaheim metro area), pushing the price up.
- A Roofing permit in North Hollywood costs around $325, included above.
Metal Roof Installation cost by roof size in North Hollywood
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | North Hollywood 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $9,050 – $17,800 |
| 1,500 sq ft (15 squares) | $12,350 – $25,400 |
| 2,000 sq ft (20 squares) | $14,500 – $33,050 |
| 2,500 sq ft (25 squares) | $17,800 – $39,600 |
| 3,000+ sq ft (30 squares) | $21,050 – $46,150 |
National size ranges localized to North Hollywood labor and climate.
Metal Roof Installation cost by type in North Hollywood
| Corrugated steel (exposed fastener) | $10,150 – $19,950 |
| Standing-seam steel | $19,950 – $38,500 |
| Aluminum | $15,600 – $30,850 |
| Copper | $33,050 – $65,750 |
| Zinc | $30,850 – $60,300 |
Adjusted to North Hollywood from national type-level ranges.
Metal Roof Installation cost by efficiency in North Hollywood
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $9,050 – $19,950 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $14,500 – $33,050 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $27,600 – $54,900 |
Labor vs. materials in North Hollywood
Install crew, removal, permit & startup — the part North Hollywood rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $23,800 North Hollywood project; your mix varies with scope.
Skilled installers in the Los Angeles-Long Beach-Anaheim area earn about $35.9/hr (15% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| North Hollywood labor adjustment | ×1.09 |
| mixed climate factor | ×1 |
| Local permit | +$325 |
| North Hollywood estimate | $14,500 – $33,050 |
Promo prices vs. the real cost
Storm-season ads push low headline prices — confirm scope before you compare:
- Free roof inspection$0 — it's a sales visit
- Financing offers$0 down · low APR
- Per-square teaser priceadvertised low; varies by pitch & material
Additional metal roof installation costs to budget for
These aren't always in the headline price. Whether you'll pay them depends on your home's condition and setup.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Labor, cleanup and permit
- Metal panels or standing-seam system
- Tear-off of the old roof
- Underlayment, fasteners and trim
What affects the cost
- Metal: steel, aluminum, copper or zinc
- Whether existing roof can be overlaid
- Roof complexity and number of penetrations
- Panel type (exposed-fastener vs standing seam)
Ways to save on metal roof installation in North Hollywood
- Compare lifetime cost, not just the install price
- Metal's 40–70 yr life lowers lifetime cost
- Some insurers discount metal and impact-rated roofs
- Steel standing seam balances cost and longevity
How long does metal roof installation last in North Hollywood?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in North Hollywood
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in North Hollywood?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in North Hollywood, CA
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to North Hollywood, CA labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $7,650–$13,100 | $400/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $8,700–$17,450 | $500/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $19,600–$34,900 | $500/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $21,800–$43,600 | $500/yr |
Per-square ranges are national installed benchmarks localized to North Hollywood, CA labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in North Hollywood
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Why metal roof installation quotes vary — and how to compare them fairly
Two bids for the “same” job can differ by thousands. Usually it's scope, not greed — here's what moves the number and how to get an apples-to-apples comparison.
Why a quote looks high (or low)
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
Get an apples-to-apples bid
- Specify tear-off vs. overlay so all bids match.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Ask how deck/sheathing repairs are priced if rot is found.
- Verify the contractor is licensed, insured and local, with recent references.
Questions to ask North Hollywood Roofing pros
Comparing quotes is only fair when they cover the same scope. Ask every bidder these before you sign.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in North Hollywood
How much does metal roof installation cost in North Hollywood, CA?
North Hollywood's going rate for metal roof installation is $14,500–$33,050 in 2026, with $23,800 the number most homeowners end up paying. That's not a national average — it's adjusted for North Hollywood labor rates, mixed-climate factors and permit fees.
Is metal roof installation more expensive in North Hollywood than average?
North Hollywood comes in about 11% higher than the national average. The main reason is labor: it indexes at 1.09 relative to the national average., plus a local Roofing permit running about $325.
Do I need a permit for metal roof installation in North Hollywood?
Yes — North Hollywood typically requires a Roofing permit for this job, running about $325. That cost is already folded into the estimate above.
What affects metal roof installation cost the most?
Installing a metal roof — higher upfront cost, long lifespan and strong durability. That's the baseline — the price moves from there. Four things drive the number more than anything else — equipment/material grade, home size and complexity, local labor, and your mixed climate zone.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to North Hollywood using the BLS metro wage data labor index (×1.09 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$325). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our North Hollywood metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in North Hollywood
Homeowners in North Hollywood often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in North Hollywood
Browse local 2026 costs for every home project in North Hollywood, CA.