Metal Roof Installation cost: Los Angeles vs North Hollywood (2026)
Metal roof installation costs about the same in Los Angeles and North Hollywood in 2026 — roughly $23,800 in each.
Los Angeles CA
Typically around $23,800
North Hollywood CA
Typically around $23,800
Los Angeles vs North Hollywood: full breakdown
| Factor | Los Angeles | North Hollywood |
|---|---|---|
| Typical 2026 cost | $23,800 | $23,800 |
| Estimated range | $14,500–$33,050 | $14,500–$33,050 |
| Labor index (vs US) | ×1.09 | ×1.09 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $14,300 | $14,300 |
| Materials/equipment | $9,500 | $9,500 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Basically a tie — focus on the contractor
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Los Angeles vs North Hollywood
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Los Angeles | North Hollywood |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,150–$19,950 | $10,150–$19,950 |
| Standing-seam steel | $19,950–$38,500 | $19,950–$38,500 |
| Aluminum | $15,600–$30,900 | $15,600–$30,900 |
| Copper | $33,050–$65,800 | $33,050–$65,800 |
| Zinc | $30,900–$60,350 | $30,900–$60,350 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Los Angeles vs North Hollywood
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Los Angeles | North Hollywood |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,050–$17,800 | $9,050–$17,800 |
| 1,500 sq ft (15 squares) | $12,350–$25,400 | $12,350–$25,400 |
| 2,000 sq ft (20 squares) | $14,500–$33,050 | $14,500–$33,050 |
| 2,500 sq ft (25 squares) | $17,800–$39,600 | $17,800–$39,600 |
| 3,000+ sq ft (30 squares) | $21,050–$46,150 | $21,050–$46,150 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Los Angeles-Long Beach-Anaheim metro · about 15% above the US average installer wage.
Los Angeles-Long Beach-Anaheim metro · about 15% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Los Angeles vs North Hollywood
Is metal roof installation cheaper in Los Angeles or North Hollywood?
metal roof installation costs about the same in both — roughly $23,800 in each city.
Why does metal roof installation cost more in North Hollywood than Los Angeles?
It comes down to labor: North Hollywood indexes at 1.09 against Los Angeles's 1.09. The mixed-vs-mixed climate difference adds to the gap.
How much is metal roof installation in Los Angeles, CA?
Los Angeles homeowners can expect $14,500 to $33,050 for metal roof installation in 2026, with $23,800 the typical number.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $35.9/hr in Los Angeles-Long Beach-Anaheim compared with $35.9/hr in Los Angeles-Long Beach-Anaheim (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Los Angeles and North Hollywood: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Los Angeles and North Hollywood — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik