Roofing · Edina, MN
How much does metal roof installation cost in Edina, MN? (2026)
In Edina, metal roof installation runs $15,250–$34,850, with most paying around $25,050 — about 17% above the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $25,050
- Typical cost
- $25,050
- Labor vs US
- +3%
- Climate
- Cold
- Local permit
- $300
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Edina
- $15,250 on the low end, $34,850 on the high — metal roof installation in Edina averages $25,050, about 17% above the national average.
- Labor is the swing factor here: Edina trades bill +3% relative to the national average.
- The estimate already covers the Roofing permit — roughly $300 in Edina.
- Expect 40–70 years of service, so planning a replacement beats a full-price emergency call.
- Skip peak pricing by scheduling in Late spring to early fall (dry, 45–85°F); the shift is worth about 5–10%.
What goes into the price in Edina
A typical Edina metal roof installation of $25,050 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Edina 2026 range |
|---|---|
| Materials & equipmentThe equipment and materials themselves — this part barely shifts by location. | $6,000 – $13,800 |
| Labor & installationRemoval, install and startup labor — the line most affected by where you live. | $8,950 – $20,750 |
| Permit & feesWhat this city's building department charges for a Roofing permit. | $300 |
| Total installed cost | $15,250 – $34,850 |
Split from the Edina estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Edina
- Expect labor here to run 3% above the national norm (based on price levels for the Minneapolis-St. Paul-Bloomington metro area) — that's what raises the total.
- Edina's cold climate increases typical metal roof installation cost by about 4% versus a neutral climate.
- Edina's Roofing permit runs roughly $300, which is already part of the number above.
Metal Roof Installation cost by roof size in Edina
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Edina 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $9,500 – $18,700 |
| 1,500 sq ft (15 squares) | $12,950 – $26,750 |
| 2,000 sq ft (20 squares) | $15,250 – $34,850 |
| 2,500 sq ft (25 squares) | $18,700 – $41,750 |
| 3,000+ sq ft (30 squares) | $22,150 – $48,650 |
National size ranges localized to Edina labor and climate.
Metal Roof Installation cost by type in Edina
| Corrugated steel (exposed fastener) | $10,700 – $21,100 |
| Standing-seam steel | $21,100 – $40,700 |
| Aluminum | $16,450 – $32,600 |
| Copper | $34,950 – $69,550 |
| Zinc | $32,600 – $63,800 |
Adjusted to Edina from national type-level ranges.
Metal Roof Installation cost by efficiency in Edina
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $9,500 – $21,000 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $15,250 – $34,850 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $29,100 – $57,850 |
Labor vs. materials in Edina
Install crew, removal, permit & startup — the part Edina rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $25,050 Edina project; your mix varies with scope.
Skilled installers in the Minneapolis-St. Paul-Bloomington area earn about $36.7/hr (18% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Edina labor adjustment | ×1.11 |
| cold climate factor | ×1.04 |
| Local permit | +$300 |
| Edina estimate | $15,250 – $34,850 |
Promo prices vs. the real cost
The prices that fill your mailbox after a hailstorm are built to look cheap, not to describe the job — here's what those advertised figures usually assume:
- Financing offers$0 down · low APR
- Per-square teaser priceadvertised low; varies by pitch & material
- Free roof inspection$0 — it's a sales visit
Additional metal roof installation costs to budget for
Only a handful of these will touch your total. Which ones depend on what's already in place and how the crew has to reach it.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Labor, cleanup and permit
- Metal panels or standing-seam system
- Tear-off of the old roof
- Underlayment, fasteners and trim
What affects the cost
- Whether existing roof can be overlaid
- Panel type (exposed-fastener vs standing seam)
- Roof complexity and number of penetrations
- Metal: steel, aluminum, copper or zinc
Ways to save on metal roof installation in Edina
- Steel standing seam balances cost and longevity
- Compare lifetime cost, not just the install price
- Some insurers discount metal and impact-rated roofs
- Metal's 40–70 yr life lowers lifetime cost
How long does metal roof installation last in Edina?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Edina
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Edina?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Edina, MN
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Edina, MN labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $7,750–$13,300 | $400/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $8,900–$17,750 | $550/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $20,000–$35,500 | $500/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $22,200–$44,400 | $550/yr |
Per-square ranges are national installed benchmarks localized to Edina, MN labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Edina
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Why metal roof installation quotes vary — and how to compare them fairly
Two contractors can price the same job thousands apart. Almost always it's the scope each assumed — here's what drives the gap and how to close it.
Why a quote looks high (or low)
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
Get an apples-to-apples bid
- Specify tear-off vs. overlay so all bids match.
- Verify the contractor is licensed, insured and local, with recent references.
- Ask how deck/sheathing repairs are priced if rot is found.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
Questions to ask Edina Roofing pros
Level the field before you choose — ask each bidder the same questions and watch how the answers differ.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Edina
How much does metal roof installation cost in Edina, MN?
In Edina, metal roof installation typically costs $15,250 to $34,850 in 2026, with most homeowners paying around $25,050. Edina labor rates, the cold climate and permit fees each shift the total, and all three already sit inside this range.
Is metal roof installation more expensive in Edina than average?
Why the gap? Edina prices about 17% higher than the national average, and local labor — indexed at 1.11 against the US average — does most of the work., and factor in about $300 for the local Roofing permit.
Do I need a permit for metal roof installation in Edina?
Yes — Edina typically requires a Roofing permit for this job, running about $300. That cost is already folded into the estimate above.
What affects metal roof installation cost the most?
Installing a metal roof — higher upfront cost, long lifespan and strong durability. Where two homes diverge is in the details below. What should you watch? Equipment or material grade, the home's size and complexity, local labor rates, and your cold climate zone — in roughly that order.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Edina using the BLS metro wage data labor index (×1.11 here), the IECC cold-climate factor (×1.04) and a typical local permit fee (≈$300). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Edina metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Edina
Homeowners in Edina often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Edina
Browse local 2026 costs for every home project in Edina, MN.