Roofing · Davie, FL
How much does metal roof installation cost in Davie, FL? (2026)
In Davie, metal roof installation runs $13,100–$29,850, with most paying around $21,500 — in line with the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $21,500
- Typical cost
- $21,500
- Labor vs US
- +12%
- Climate
- Hot
- Local permit
- $325
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Davie
- In Davie, metal roof installation runs $13,100–$29,850 — call it $21,500 for a typical job, in line with the national average.
- Labor is the swing factor here: Davie trades bill +12% relative to the national average.
- Budget about $325 for the local Roofing permit; it's already included above.
- Schedule the replacement early — this typically holds up 40–70 years, and an emergency swap costs full price.
- Cheapest time to buy: Late spring to early fall (dry, 45–85°F) — roughly 5–10% off peak-season pricing.
What goes into the price in Davie
A typical Davie metal roof installation of $21,500 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Davie 2026 range |
|---|---|
| Materials & equipmentHardware and supplies for the job; national pricing applies almost everywhere you go. | $5,100 – $11,800 |
| Labor & installationInstall crew, removal and startup — the part local rates move most. | $7,675 – $17,725 |
| Permit & feesWhat this city's building department charges for a Roofing permit. | $325 |
| Total installed cost | $13,100 – $29,850 |
Split from the Davie estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Davie
- Expect labor here to run 12% above the national norm (based on price levels for the Miami-Fort Lauderdale-West Palm Beach metro area) — that's what raises the total.
- The hot climate in Davie adds roughly 3% to typical metal roof installation pricing versus a neutral climate.
- Davie's Roofing permit runs roughly $325, which is already part of the number above.
Metal Roof Installation cost by roof size in Davie
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Davie 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $8,200 – $16,050 |
| 1,500 sq ft (15 squares) | $11,150 – $22,950 |
| 2,000 sq ft (20 squares) | $13,100 – $29,850 |
| 2,500 sq ft (25 squares) | $16,050 – $35,750 |
| 3,000+ sq ft (30 squares) | $19,050 – $41,650 |
National size ranges localized to Davie labor and climate.
Metal Roof Installation cost by type in Davie
| Corrugated steel (exposed fastener) | $9,200 – $18,100 |
| Standing-seam steel | $18,100 – $34,950 |
| Aluminum | $14,150 – $28,000 |
| Copper | $30,000 – $59,650 |
| Zinc | $28,000 – $54,700 |
Adjusted to Davie from national type-level ranges.
Metal Roof Installation cost by efficiency in Davie
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $8,200 – $18,050 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $13,100 – $29,850 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $24,950 – $49,550 |
Labor vs. materials in Davie
Install crew, removal, permit & startup — the part Davie rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $21,500 Davie project; your mix varies with scope.
Skilled installers in the Miami-Fort Lauderdale-West Palm Beach area earn about $28.8/hr (7% below the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Davie labor adjustment | ×0.96 |
| hot climate factor | ×1.03 |
| Local permit | +$325 |
| Davie estimate | $13,100 – $29,850 |
Promo prices vs. the real cost
After a regional storm, roofing ads get aggressive on price and vague on scope. Check what's actually covered before comparing:
- Per-square teaser priceadvertised low; varies by pitch & material
- Financing offers$0 down · low APR
- Free roof inspection$0 — it's a sales visit
Additional metal roof installation costs to budget for
Treat them as possibilities, not certainties — the ones that reach your quote follow your property's age and setup.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Metal panels or standing-seam system
- Tear-off of the old roof
- Labor, cleanup and permit
- Underlayment, fasteners and trim
What affects the cost
- Metal: steel, aluminum, copper or zinc
- Panel type (exposed-fastener vs standing seam)
- Whether existing roof can be overlaid
- Roof complexity and number of penetrations
Ways to save on metal roof installation in Davie
- Some insurers discount metal and impact-rated roofs
- Steel standing seam balances cost and longevity
- Compare lifetime cost, not just the install price
- Metal's 40–70 yr life lowers lifetime cost
How long does metal roof installation last in Davie?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Davie
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Davie?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Davie, FL
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Davie, FL labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,700–$11,500 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,700–$15,350 | $450/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,300–$30,700 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,200–$38,400 | $450/yr |
Per-square ranges are national installed benchmarks localized to Davie, FL labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Davie
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Why metal roof installation quotes vary — and how to compare them fairly
A wide spread between bids rarely means someone is overcharging; it usually means they priced different work. Below is what moves the number and how to line the quotes up.
Why a quote looks high (or low)
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
Get an apples-to-apples bid
- Specify tear-off vs. overlay so all bids match.
- Ask how deck/sheathing repairs are priced if rot is found.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Verify the contractor is licensed, insured and local, with recent references.
Questions to ask Davie Roofing pros
You can't judge bids side by side unless they cover the same ground; run through these with every pro on your list.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Davie
How much does metal roof installation cost in Davie, FL?
Expect to pay $13,100 to $29,850 for metal roof installation in Davie in 2026 — most quotes cluster around $21,500. Local labor, the hot climate and permit fees are all baked into that number.
Is metal roof installation more expensive in Davie than average?
Yes — Davie is about the same as the national average, largely a function of local labor pricing at 0.96× the US average., and factor in about $325 for the local Roofing permit.
Do I need a permit for metal roof installation in Davie?
Budget about $325 for the Roofing permit most Davie jobs like this require — and note it already sits inside the estimate above, not on top of it.
What affects metal roof installation cost the most?
Start with the fundamentals — installing a metal roof — higher upfront cost, long lifespan and strong durability. Expect equipment/material grade, home size and complexity, local labor rates and the hot climate zone to matter most here.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Davie using the BLS metro wage data labor index (×0.96 here), the IECC hot-climate factor (×1.03) and a typical local permit fee (≈$325). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Davie metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Davie
Homeowners in Davie often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Davie
Browse local 2026 costs for every home project in Davie, FL.