HVAC · Beaverton, OR
How much does heat pump installation cost in Beaverton, OR? (2026)
In Beaverton, heat pump installation runs $7,350–$13,400, with most paying around $10,400 — about 12% above the national average. Installing an air-source heat pump that provides both heating and cooling.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $10,400
- Typical cost
- $10,400
- Labor vs US
- +9%
- Climate
- Mixed
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the heat pump installation range.
Key takeaways for Beaverton
- In Beaverton, heat pump installation runs $7,350–$13,400 — call it $10,400 for a typical job, about 12% above the national average.
- This estimate departs from the national number mainly because Beaverton labor sits +9% versus the US average.
- Set aside roughly $250 for the permit; that's already part of the range above, not an add-on.
- Schedule the replacement early — this typically holds up 10–15 years, and an emergency swap costs full price.
- Skip peak pricing by scheduling in Spring and fall (Mar–May, Sep–Oct); the shift is worth about 5–15%.
- What you actually pay may drop below this range once 25C/25D credits and local utility rebates apply — details are in the rebates section.
What goes into the price in Beaverton
A typical Beaverton heat pump installation of $10,400 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Beaverton 2026 range |
|---|---|
| Materials & equipmentHardware and supplies for the job; national pricing applies almost everywhere you go. | $2,850 – $5,250 |
| Labor & installationCrew time for removal, installation and startup; local labor rates drive most of the swing here. | $4,250 – $7,900 |
| Permit & feesHVAC permit cost, adjusted to this city's rate. | $250 |
| Total installed cost | $7,350 – $13,400 |
Split from the Beaverton estimate using a 60% local-labor share; line items sum to the total.
Why heat pump installation costs what it does in Beaverton
- Expect labor here to run 9% above the national norm (based on price levels for the Portland-Vancouver-Hillsboro metro area) — that's what raises the total.
- The mixed climate in Beaverton adds roughly 2% to typical heat pump installation pricing versus a neutral climate.
- A HVAC permit in Beaverton costs around $250, included above.
Heat Pump Installation cost by home size in Beaverton
Heat pumps are sized in tons like AC (roughly one ton per 500–600 sq ft), but cold-climate models may be sized up for heating. Ductless mini-splits are priced per zone instead.
| home size | Beaverton 2026 range |
|---|---|
| 1,000 sq ft (≈2 tons / 1–2 zones) | $5,700 – $10,100 |
| 1,500 sq ft (≈2.5 tons) | $6,800 – $11,750 |
| 2,000 sq ft (≈3 tons) | $7,350 – $13,400 |
| 2,500 sq ft (≈4 tons) | $9,550 – $15,600 |
| 3,000+ sq ft (≈5 tons) | $11,200 – $18,850 |
National size ranges localized to Beaverton labor and climate.
Heat Pump Installation cost by type in Beaverton
| Air-source (ducted) | $8,450 – $12,250 |
| Ductless mini-split | $5,150 – $13,350 |
| Geothermal (ground-source) | $22,100 – $29,700 |
Adjusted to Beaverton from national type-level ranges.
Heat Pump Installation cost by efficiency in Beaverton
Heat pumps are rated by SEER2 (cooling) and HSPF2 (heating). Cold-climate (ccASHP) models hold capacity in deep winter and qualify for the largest rebates.
| Ductless mini-split (per zone)Best for additions or homes without ducts | $4,100 – $9,000 |
| Ducted air-source (standard)Whole-home heating + cooling in one | $7,350 – $13,400 |
| Cold-climate (ccASHP, premium)Holds heat below freezing; top incentives | $10,100 – $17,750 |
Labor vs. materials in Beaverton
Install crew, removal, permit & startup — the part Beaverton rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $10,400 Beaverton project; your mix varies with scope.
Skilled installers in the Portland-Vancouver-Hillsboro area earn about $34.9/hr (12% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your heat pump installation cost.
How we estimate it
| National range | $6,500 – $12,000 |
| Beaverton labor adjustment | ×1.07 |
| mixed climate factor | ×1.02 |
| Local permit | +$250 |
| Beaverton estimate | $7,350 – $13,400 |
Promo prices vs. the real cost
A cheap headline number is usually a hook to get a technician in the door, not the price of the job. Compare it against the real installed estimate above:
- "Free" replacement estimate$0 — it's a sales visit
- Seasonal tune-up promo$79–$129
- Financing offers$0 down · 0% APR, 12–60 mo
- Service call / diagnostic fee$75–$150
Additional heat pump installation costs to budget for
None of these are a given. What you actually pay hinges on the condition of the current system and how hard the site is to work in.
| Old equipment removal | $60 – $350 |
| Electrical panel upgrade (if needed) | $1,200 – $3,000 |
| Backup heat strip / dual-fuel setup | $300 – $1,500 |
| Ductwork (vs. mini-split, no ducts) | $1,000 – $5,000 |
| Smart thermostat | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Refrigerant lines, electrical and mounting
- The heat pump (outdoor + indoor units)
- Commissioning and performance testing
- Removal of old equipment
What affects the cost
- Type: ducted, ductless mini-split or geothermal
- Heating/cooling capacity and number of zones
- Electrical panel capacity and any upgrades
- Backup heat strip or dual-fuel setup
Ways to save on heat pump installation in Beaverton
- Check state and utility heat-pump incentives
- Size for your climate to avoid expensive backup heat
- Ductless mini-splits avoid costly ductwork in older homes
- Compare dual-fuel vs all-electric payback
How long does heat pump installation last in Beaverton?
Heat pumps run year-round, so they last ~10–15 years — a bit less than a heat-only furnace.
Twice-yearly service (heating + cooling seasons) is ideal since it runs all year.
Signs you need heat pump installation in Beaverton
- Your AC and furnace are both aging and due together
- You want to electrify and cut fossil-fuel bills
- Heating fuel (oil/propane) costs are high in your area
- The current heat pump is 10+ years old or on R-22
- Rooms are unevenly conditioned and you want zoning
Repair or replace in Beaverton?
Repair if…
- It's under ~8 years old
- The fault is a reversing valve, capacitor, or sensor under warranty
Replace if…
- It's 10+ years old and needs a compressor or coil
- It runs on R-22 refrigerant
- You're already replacing the air handler or ductwork anyway
Rebates & incentives in Oregon
Heat pumps qualify for the largest 2026 incentives — this is the equipment state and utility rebate programs are built around.
The federal 25C tax credit (up to $2,000 for heat pumps; $600 for high-efficiency AC or furnaces) and the 25D credit ended December 31, 2025 under the One Big Beautiful Bill Act — neither is available for 2026 installs. The remaining federal help is the IRA Home Electrification & Appliance Rebates (HEAR): up to $8,000 toward a heat pump for households under 150% of area median income, paid at point of sale where a state has launched its program.
Verified July 2026. Rebate budgets deplete and program windows change fast — confirm current amounts and eligibility with your utility and the DSIRE database before you budget. Costadia does not administer these programs.
Cheapest time for heat pump installation in Beaverton
Crews are busiest — and priciest — exactly when it's hottest or coldest, since that's when systems fail under load. Book in the mild months and you're negotiating from a position of choice, not a broken furnace.
Why heat pump installation quotes vary — and how to compare them fairly
When two quotes for one project diverge by thousands, the cause is usually what each one includes, not markup — here's how to read the difference.
Why a quote looks high (or low)
- Equipment tier isn't matched — a 14.3 SEER2 bid will always undercut an 18 SEER2 one for the "same" job.
- Sizing was guessed from square footage instead of a Manual J load calculation, so the equipment is wrong.
- Brand, warranty length and whether startup/commissioning is included all move the number.
Get an apples-to-apples bid
- Get at least three written bids before you sign.
- Require an itemized quote splitting equipment, labor, permit and add-ons.
- Confirm old-unit removal, the permit and startup testing are all included.
- Insist on a Manual J load calculation, not a square-footage guess.
Questions to ask Beaverton HVAC pros
You can't judge bids side by side unless they cover the same ground; run through these with every pro on your list.
- 1Did you run a Manual J load calculation to size the system, or estimate from square footage?
- 2What AFUE/SEER2 rating is this unit, and what's the payback vs. the next tier up?
- 3Is removal of the old equipment, the permit, and startup testing included in the quote?
- 4Will my existing ductwork and venting work as-is, or is repair/resizing needed?
- 5What's covered under the labor warranty vs. the manufacturer's parts warranty?
Heat Pump Installation in Beaverton
How much does heat pump installation cost in Beaverton, OR?
Budgeting for heat pump installation? In Beaverton, 2026 prices land between $7,350 and $13,400, and about $10,400 is the typical outcome. That range already accounts for Beaverton's labor rates, its mixed climate and local permit costs.
Is heat pump installation more expensive in Beaverton than average?
Yes — Beaverton is about 12% higher than the national average, largely a function of local labor pricing at 1.07× the US average. and the local HVAC permit costs about $250.
Do I need a permit for heat pump installation in Beaverton?
Yes — Beaverton typically requires a HVAC permit for this job, running about $250. That cost is already folded into the estimate above.
What affects heat pump installation cost the most?
In plain terms, installing an air-source heat pump that provides both heating and cooling. Your mixed climate zone plays a part, but equipment/material grade, the size and complexity of the home, and local labor rates weigh in just as heavily.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
The budget-first case
In a temperate region the smart move is to size the job correctly with a Manual J and take the base efficiency tier. A system that spends most days coasting can't recover the cost of a high-SEER2 compressor, because the savings only show up under heavy load you don't put on it. Match the equipment to how little you actually run it, not to the brochure's top number.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
Get the sizing and the commissioning right and the brand debate mostly disappears. Insist on a Manual J, pick an efficiency tier your climate can justify, and pocket every incentive that still applies after the federal credits lapsed.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national heat pump installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Beaverton using the BLS metro wage data labor index (×1.07 here), the IECC mixed-climate factor (×1.02) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Beaverton heat pump installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Heat pump installation alternatives in Beaverton
Homeowners in Beaverton often pair this with
A heat pump installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Beaverton
Browse local 2026 costs for every home project in Beaverton, OR.