Schertz, TX Furnace Replacement Cost (2026): $3,600

Refine your estimate

Tune it to your home to narrow the furnace replacement range.

Home size2,000 sq ft

800 sq ft4,500 sq ft

Quality tier

Conditions & add-ons

Your adjusted estimate

$3,600 – $6,500

Most likely $5,050

Key takeaways for Schertz

Expect $3,600 to $6,500 for furnace replacement in Schertz; most quotes cluster near $5,050, about 6% below the national average.
The −5% gap between Schertz and national labor rates is the single biggest reason this price isn't the national average.
Set aside roughly $200 for the permit; that's already part of the range above, not an add-on.
Expect 15–30 years of service, so planning a replacement beats a full-price emergency call.
Time it right and you can save 5–15%: the best window to book is Spring and fall (Mar–May, Sep–Oct).
Federal 25C/25D tax credits and local utility rebates can lower the net cost — see the rebates section below.

Price breakdown

What goes into the price in Schertz

A typical Schertz furnace replacement of $5,050 breaks down roughly like this — materials priced near the national level, labor set by local rates.

Line item	Schertz 2026 range
Materials & equipmentHardware and supplies for the job; national pricing applies almost everywhere you go.	$1,350 – $2,500
Labor & installationLabor to remove the old system and install the new one — this is where your city's wage index shows up.	$2,050 – $3,800
Permit & feesTypical local HVAC permit, scaled to this metro.	$200
Total installed cost	$3,600 – $6,500

Split from the Schertz estimate using a 60% local-labor share; line items sum to the total.

Local factors

Why furnace replacement costs what it does in Schertz

Expect labor here to run 5% below the national norm (based on price levels for the San Antonio-New Braunfels metro area) — that's what lowers the total.
The hot climate in Schertz cuts roughly 5% to typical furnace replacement pricing versus a neutral climate.
Schertz's HVAC permit runs roughly $200, which is already part of the number above.

You're in a hot-climate zone, meaning how well furnace replacement handles a long cooling season matters most. A high-efficiency system sized for a long cooling season pays off here — just confirm the ductwork and charge are correct first.

By size

Furnace Replacement cost by home size in Schertz

Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.

home size	Schertz 2026 range
1,000 sq ft (≈45,000 BTU)	$2,700 – $4,900
1,500 sq ft (≈68,000 BTU)	$3,150 – $5,600
2,000 sq ft (≈90,000 BTU)	$3,600 – $6,500
2,500 sq ft (≈110,000 BTU)	$4,150 – $7,400
3,000 sq ft (≈130,000 BTU)	$4,700 – $8,300
3,500+ sq ft (≈150,000 BTU)	$5,250 – $9,200

National size ranges localized to Schertz labor and climate.

By type

Furnace Replacement cost by type in Schertz

Gas furnace	$3,550 – $6,450
High-efficiency gas furnace	$3,200 – $6,450
Electric furnace	$2,000 – $4,250

Adjusted to Schertz from national type-level ranges.

By efficiency

Furnace Replacement cost by efficiency in Schertz

Efficiency is measured in AFUE — the percentage of fuel turned into heat. Higher AFUE costs more upfront but cuts fuel bills, and in cold (northern) regions the DOE requires ≥95% AFUE gas furnaces.

80% AFUE (standard)Lowest upfront; fine in mild climates	$2,900 – $5,150
90–95% AFUE (high-efficiency)Best all-round value in most regions	$3,600 – $6,500
96%+ AFUE (condensing, premium)Lowest fuel bills; required in cold zones	$4,700 – $8,750

Where the money goes

Labor vs. materials in Schertz

Labor (60%)

≈ $3,050

Install crew, removal, permit & startup — the part Schertz rates move most.

Materials (40%)

≈ $2,000

Equipment & materials — priced closer to the national level.

Split based on a typical $5,050 Schertz project; your mix varies with scope.

Skilled installers in the San Antonio-New Braunfels area earn about $28.4/hr (9% below the US average, per BLS metro wage data) — the local wage is what moves the labor half of your furnace replacement cost.

Methodology

How we estimate it

National range	$3,800 – $7,000
Schertz labor adjustment	×0.95
hot climate factor	×0.95
Local permit	+$200
Schertz estimate	$3,600 – $6,500

Typical 2026

$5,050

Range

$3,600 – $6,500

Climate

hot

Local permit

$200

Promo prices vs. the real cost

Installers advertise low teaser prices to win the visit — keep them separate from the real installed cost above:

Seasonal tune-up promo$79–$129
"Free" replacement estimate$0 — it's a sales visit
Service call / diagnostic fee$75–$150
Financing offers$0 down · 0% APR, 12–60 mo

Hidden costs

Additional furnace replacement costs to budget for

These aren't always in the headline price. Whether you'll pay them depends on your home's condition and setup.

Old furnace removal & disposal	$50 – $330
New ductwork (vs. repair $300–$1,500)Only if ducts are missing or failing	$1,000 – $5,000
Gas line run or upgrade	$250 – $800
Chimney liner (for high-efficiency venting)	$600 – $2,500
Smart thermostat	$150 – $500

Typical national add-on ranges; confirm locally during your quote.

What's included

Installation labor and basic ductwork connections
Removal and disposal of the old unit
Thermostat connection and system startup/testing
The furnace unit and burner assembly

What affects the cost

Condition of existing ductwork and venting
Fuel type (gas vs electric) and AFUE efficiency rating
Heating capacity (BTU) needed for your square footage
Whether a chimney liner or new gas line is required

Ways to save on furnace replacement in Schertz

Right-size the unit; oversizing wastes money and cycles hard
Schedule in the off-season (spring/summer) for better rates
Get at least 3 quotes — installed prices vary widely
Look for utility rebates on high-efficiency models

Lifespan

How long does furnace replacement last in Schertz?

Expected lifespan

15–30 years

Gas furnaces typically last 15–20 years; well-maintained units can reach 30.

Annual maintenance

$70–$300/yr

An annual tune-up keeps efficiency up and protects the warranty.

When to replace

Signs you need furnace replacement in Schertz

The furnace is 15+ years old (near or past its service life)
Heating bills keep climbing despite no change in usage
Some rooms are warm while others stay cold (uneven heating)
Frequent repairs — you've called for service more than once or twice recently
Banging, rattling or screeching noises on startup
A yellow or flickering burner flame instead of steady blue (have it checked immediately)
More dust, dryness, or a stale smell when the heat runs

Decision

Repair or replace in Schertz?

The $5,000 rule: multiply the repair quote by the furnace's age in years. If it tops $5,000, replacement is usually the smarter spend.

Repair if…

The unit is under ~10 years old and otherwise efficient
The fix is a single inexpensive part (igniter, flame sensor, capacitor)
It's still under manufacturer warranty

Replace if…

It's 15+ years old and needs a major part
The heat exchanger is cracked (a safety issue — replace, don't repair)
The repair costs more than about half of a new system
It's an 80% AFUE unit and your fuel bills are high in a cold climate

Rebates & incentives in Texas

Most 2026 rebates reward switching to a heat pump, not a like-for-like gas furnace. Replacing a gas furnace, your savings are mainly utility efficiency rebates (high-AFUE models) — but pricing a heat pump can unlock far larger rebates.

The federal 25C tax credit (up to $2,000 for heat pumps; $600 for high-efficiency AC or furnaces) and the 25D credit ended December 31, 2025 under the One Big Beautiful Bill Act — neither is available for 2026 installs. The remaining federal help is the IRA Home Electrification & Appliance Rebates (HEAR): up to $8,000 toward a heat pump for households under 150% of area median income, paid at point of sale where a state has launched its program.

Verified July 2026. Rebate budgets deplete and program windows change fast — confirm current amounts and eligibility with your utility and the DSIRE database before you budget. Costadia does not administer these programs.

Best time to buy

Cheapest time for furnace replacement in Schertz

Why spring and fall are cheaper: contractors have open calendar space and compete harder for the work. Why summer and deep winter are expensive: a broken system in extreme weather isn't optional, so you lose your negotiating leverage.

Best window

Spring and fall (Mar–May, Sep–Oct)

Avoid

Peak summer and mid-winter

Off-peak savings

5–15%

Treat replacement as scheduled maintenance, not an emergency: AC in the cold months, heat in the warm ones. That's the difference between three competing quotes and one panicked call.

Reading your quotes

Why furnace replacement quotes vary — and how to compare them fairly

Two bids for the “same” job can differ by thousands. Usually it's scope, not greed — here's what moves the number and how to get an apples-to-apples comparison.

Why a quote looks high (or low)

Equipment tier isn't matched — a 14.3 SEER2 bid will always undercut an 18 SEER2 one for the "same" job.
Brand, warranty length and whether startup/commissioning is included all move the number.
Sizing was guessed from square footage instead of a Manual J load calculation, so the equipment is wrong.

Get an apples-to-apples bid

Insist on a Manual J load calculation, not a square-footage guess.
Require an itemized quote splitting equipment, labor, permit and add-ons.
Ask every bidder for the same SEER2/AFUE rating so you compare like for like.
Get at least three written bids before you sign.

Hiring

Questions to ask Schertz HVAC pros

Comparing quotes is only fair when they cover the same scope. Ask every bidder these before you sign.

1Did you run a Manual J load calculation to size the system, or estimate from square footage?
2What AFUE/SEER2 rating is this unit, and what's the payback vs. the next tier up?
3Is removal of the old equipment, the permit, and startup testing included in the quote?
4Will my existing ductwork and venting work as-is, or is repair/resizing needed?
5What's covered under the labor warranty vs. the manufacturer's parts warranty?

FAQ

Furnace Replacement in Schertz

How much does furnace replacement cost in Schertz, TX?

In Schertz, furnace replacement typically costs $3,600 to $6,500 in 2026, with most homeowners paying around $5,050. That range already accounts for Schertz's labor rates, its hot climate and local permit costs.

Is furnace replacement more expensive in Schertz than average?

Schertz comes in about 6% lower than the national average. The main reason is labor: it indexes at 0.95 relative to the national average. and the local HVAC permit costs about $200.

Do I need a permit for furnace replacement in Schertz?

In Schertz, this usually needs a HVAC permit (around $200). The estimate above already accounts for it.

What affects furnace replacement cost the most?

Replacing a residential furnace, including the unit and installation labor. Expect equipment/material grade, home size and complexity, local labor rates and the hot climate zone to matter most here.

Editors' roundtable

How much should you really budget for HVAC in 2026?

Three factors move an HVAC quote more than anything else: how well it's sized, which efficiency tier you pick, and the brand markup. Our editors break down how they weigh each one.

The efficiency-first case

In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.

The budget-first case

Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.

The longevity case

The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.

Our take

Match the efficiency tier to your climate, insist on a real load calculation, and stack every rebate you qualify for. The expensive mistakes are wrong sizing and a rushed install — not picking the "wrong" brand.

Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.

How we calculated this estimate

We start with 2026 national furnace replacement ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Schertz using the BLS metro wage data labor index (×0.95 here), the IECC hot-climate factor (×0.95) and a typical local permit fee (≈$200). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.

This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.

By Serhat ÖzçelikReviewed by Costadia EditorialUpdated June 2026Sources: BLS · BEA · IECC · IRS · DSIRE · industry cost data

References & data sources

Our Schertz furnace replacement estimate is built from these primary, mostly government sources — not a single aggregator.

Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.