Peabody, MA Furnace Replacement Cost (2026): $4,950

Refine your estimate

Tune it to your home to narrow the furnace replacement range.

Home size2,000 sq ft

800 sq ft4,500 sq ft

Quality tier

Conditions & add-ons

Your adjusted estimate

$4,950 – $8,850

Most likely $6,900

Key takeaways for Peabody

Priced about 28% above the national average, furnace replacement in Peabody spans $4,950 to $8,850 — figure $6,900 for a standard job.
Peabody labor runs +12% versus the US average — the main reason the local price differs from the national figure.
The estimate already covers the HVAC permit — roughly $250 in Peabody.
Count on 15–30 years from a solid install; timing the next job yourself avoids the emergency premium.
Time it right and you can save 5–15%: the best window to book is Spring and fall (Mar–May, Sep–Oct).
The estimate above is before incentives; federal 25C/25D credits and utility rebates below can reduce what you actually pay.

Price breakdown

What goes into the price in Peabody

A typical Peabody furnace replacement of $6,900 breaks down roughly like this — materials priced near the national level, labor set by local rates.

Line item	Peabody 2026 range
Materials & equipmentThe unit and materials — largely the same cost no matter which city you're in.	$1,900 – $3,450
Labor & installationThe installation work itself — removal, setup and startup — is what your city's labor rate actually moves.	$2,800 – $5,150
Permit & feesLocal building-department fee for HVAC work here.	$250
Total installed cost	$4,950 – $8,850

Split from the Peabody estimate using a 60% local-labor share; line items sum to the total.

Local factors

Why furnace replacement costs what it does in Peabody

Labor in Peabody runs about 12% above the national average (based on price levels for the Boston-Cambridge-Newton metro area), which raises the installed price.
Peabody's cold climate increases typical furnace replacement cost by about 8% versus a neutral climate.
Peabody's HVAC permit runs roughly $250, which is already part of the number above.

This region sees hard winters, which means backup or dual-fuel capacity, not the headline rating, decides how furnace replacement holds up on the worst mornings. Prioritise a high-efficiency, properly-sized unit that can hold temperature through sustained sub-freezing spells, and confirm insulation and sealing first.

By size

Furnace Replacement cost by home size in Peabody

Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.

home size	Peabody 2026 range
1,000 sq ft (≈45,000 BTU)	$3,700 – $6,650
1,500 sq ft (≈68,000 BTU)	$4,300 – $7,650
2,000 sq ft (≈90,000 BTU)	$4,950 – $8,850
2,500 sq ft (≈110,000 BTU)	$5,650 – $10,100
3,000 sq ft (≈130,000 BTU)	$6,400 – $11,350
3,500+ sq ft (≈150,000 BTU)	$7,150 – $12,550

National size ranges localized to Peabody labor and climate.

By type

Furnace Replacement cost by type in Peabody

Gas furnace	$4,800 – $8,750
High-efficiency gas furnace	$4,300 – $8,750
Electric furnace	$2,700 – $5,800

Adjusted to Peabody from national type-level ranges.

By efficiency

Furnace Replacement cost by efficiency in Peabody

Efficiency is measured in AFUE — the percentage of fuel turned into heat. Higher AFUE costs more upfront but cuts fuel bills, and in cold (northern) regions the DOE requires ≥95% AFUE gas furnaces.

80% AFUE (standard)Lowest upfront; fine in mild climates	$3,950 – $7,000
90–95% AFUE (high-efficiency)Best all-round value in most regions	$4,950 – $8,850
96%+ AFUE (condensing, premium)Lowest fuel bills; required in cold zones	$6,400 – $11,950

Where the money goes

Labor vs. materials in Peabody

Labor (60%)

≈ $4,150

Install crew, removal, permit & startup — the part Peabody rates move most.

Materials (40%)

≈ $2,750

Equipment & materials — priced closer to the national level.

Split based on a typical $6,900 Peabody project; your mix varies with scope.

Skilled installers in the Boston-Cambridge-Newton area earn about $38.4/hr (23% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your furnace replacement cost.

Methodology

How we estimate it

National range	$3,800 – $7,000
Peabody labor adjustment	×1.14
cold climate factor	×1.08
Local permit	+$250
Peabody estimate	$4,950 – $8,850

Typical 2026

$6,900

Range

$4,950 – $8,850

Climate

cold

Local permit

$250

Promo prices vs. the real cost

Before you're swayed by an ad, know that HVAC pricing has two layers — the marketing number and the actual installed cost. Here's what the marketing layer usually covers:

Service call / diagnostic fee$75–$150
Seasonal tune-up promo$79–$129
"Free" replacement estimate$0 — it's a sales visit
Financing offers$0 down · 0% APR, 12–60 mo

Hidden costs

Additional furnace replacement costs to budget for

Some of these land on the final invoice and some never surface — it comes down to your home's age, access and existing setup.

Old furnace removal & disposal	$50 – $330
New ductwork (vs. repair $300–$1,500)Only if ducts are missing or failing	$1,000 – $5,000
Gas line run or upgrade	$250 – $800
Chimney liner (for high-efficiency venting)	$600 – $2,500
Smart thermostat	$150 – $500

Typical national add-on ranges; confirm locally during your quote.

What's included

The furnace unit and burner assembly
Installation labor and basic ductwork connections
Thermostat connection and system startup/testing
Removal and disposal of the old unit

What affects the cost

Heating capacity (BTU) needed for your square footage
Condition of existing ductwork and venting
Fuel type (gas vs electric) and AFUE efficiency rating
Whether a chimney liner or new gas line is required

Ways to save on furnace replacement in Peabody

Look for utility rebates on high-efficiency models
Get at least 3 quotes — installed prices vary widely
Schedule in the off-season (spring/summer) for better rates
Right-size the unit; oversizing wastes money and cycles hard

Lifespan

How long does furnace replacement last in Peabody?

Expected lifespan

15–30 years

Gas furnaces typically last 15–20 years; well-maintained units can reach 30.

Annual maintenance

$70–$300/yr

An annual tune-up keeps efficiency up and protects the warranty.

When to replace

Signs you need furnace replacement in Peabody

The furnace is 15+ years old (near or past its service life)
Heating bills keep climbing despite no change in usage
Some rooms are warm while others stay cold (uneven heating)
Frequent repairs — you've called for service more than once or twice recently
Banging, rattling or screeching noises on startup
A yellow or flickering burner flame instead of steady blue (have it checked immediately)
More dust, dryness, or a stale smell when the heat runs

Decision

Repair or replace in Peabody?

The $5,000 rule: multiply the repair quote by the furnace's age in years. If it tops $5,000, replacement is usually the smarter spend.

Repair if…

The unit is under ~10 years old and otherwise efficient
The fix is a single inexpensive part (igniter, flame sensor, capacitor)
It's still under manufacturer warranty

Replace if…

It's 15+ years old and needs a major part
The heat exchanger is cracked (a safety issue — replace, don't repair)
The repair costs more than about half of a new system
It's an 80% AFUE unit and your fuel bills are high in a cold climate

Rebates & incentives in Massachusetts

HEAR live

Most 2026 rebates reward switching to a heat pump, not a like-for-like gas furnace. Replacing a gas furnace, your savings are mainly utility efficiency rebates (high-AFUE models) — but pricing out a heat pump often qualifies you for far larger rebates.

Mass Save — Heat Pumps ↗Massachusetts utilities
Up to $10,000 for a whole-home heat pump (no income limit) plus 0% HEAT Loan financing.

Status: Mass Save rebates are utility-funded and run year-round; the income-based HEAR top-up launched in 2025.

The federal 25C tax credit (up to $2,000 for heat pumps; $600 for high-efficiency AC or furnaces) and the 25D credit ended December 31, 2025 under the One Big Beautiful Bill Act — neither is available for 2026 installs. The remaining federal help is the IRA Home Electrification & Appliance Rebates (HEAR): up to $8,000 toward a heat pump for households under 150% of area median income, paid at point of sale where a state has launched its program.

Verified July 2026. Rebate budgets deplete and program windows change fast — confirm current amounts and eligibility with your utility and the DSIRE database before you budget. Costadia does not administer these programs.

Best time to buy

Cheapest time for furnace replacement in Peabody

HVAC demand collapses in the mild shoulder seasons, so installers discount to keep crews busy. The most expensive time to buy is during a heat wave or cold snap, when a dead system forces a full-price emergency replacement.

Best window

Spring and fall (Mar–May, Sep–Oct)

Avoid

Peak summer and mid-winter

Off-peak savings

5–15%

Get ahead of a failure. AC replaced in the off-season (fall/winter) and heating replaced in spring/summer means you pick the contractor — the contractor doesn't pick you.

Reading your quotes

Why furnace replacement quotes vary — and how to compare them fairly

Two contractors can price the same job thousands apart. Almost always it's the scope each assumed — here's what drives the gap and how to close it.

Why a quote looks high (or low)

Equipment tier isn't matched — a 14.3 SEER2 bid will always undercut an 18 SEER2 one for the "same" job.
Sizing was guessed from square footage instead of a Manual J load calculation, so the equipment is wrong.
Brand, warranty length and whether startup/commissioning is included all move the number.

Get an apples-to-apples bid

Require an itemized quote splitting equipment, labor, permit and add-ons.
Confirm old-unit removal, the permit and startup testing are all included.
Ask every bidder for the same SEER2/AFUE rating so you compare like for like.
Insist on a Manual J load calculation, not a square-footage guess.

Hiring

Questions to ask Peabody HVAC pros

A fair comparison starts with identical questions. Ask each contractor the following before anything gets signed.

1Did you run a Manual J load calculation to size the system, or estimate from square footage?
2What AFUE/SEER2 rating is this unit, and what's the payback vs. the next tier up?
3Is removal of the old equipment, the permit, and startup testing included in the quote?
4Will my existing ductwork and venting work as-is, or is repair/resizing needed?
5What's covered under the labor warranty vs. the manufacturer's parts warranty?

FAQ

Furnace Replacement in Peabody

How much does furnace replacement cost in Peabody, MA?

furnace replacement in Peabody runs $4,950–$8,850 as of 2026, with $6,900 the figure most homeowners actually land on. Local labor, the cold climate and permit fees are all baked into that number.

Is furnace replacement more expensive in Peabody than average?

Put Peabody next to the national picture and it lands about 28% higher than the national average; the labor index of 1.14 explains the bulk of it.; add in a HVAC permit at roughly $250.

Do I need a permit for furnace replacement in Peabody?

Budget about $250 for the HVAC permit most Peabody jobs like this require — and note it already sits inside the estimate above, not on top of it.

What affects furnace replacement cost the most?

Replacing a residential furnace, including the unit and installation labor. That's the baseline — the price moves from there. The biggest drivers are equipment/material grade, the size and complexity of your home, local labor rates, and your climate zone (cold).

Editors' roundtable

How much should you really budget for HVAC in 2026?

Ask five contractors for an HVAC quote and you'll get five different numbers — usually because they disagree on sizing, efficiency and equipment tier. Here's how our editors think through those trade-offs.

The budget-first case

In a temperate region the smart move is to size the job correctly with a Manual J and take the base efficiency tier. A system that spends most days coasting can't recover the cost of a high-SEER2 compressor, because the savings only show up under heavy load you don't put on it. Match the equipment to how little you actually run it, not to the brochure's top number.

The efficiency-first case

Where you face brutal summers or hard winters, a higher SEER2/AFUE system or a heat pump runs enough hours to claw back its premium through lower bills — and utility or state rebates can still trim the sticker even though the federal 25C/25D credits closed at the end of 2025. Do the payback arithmetic before you reach for the cheapest box on the lot.

The longevity case

The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.

Our take

Match the efficiency tier to your climate, insist on a real load calculation, and stack every rebate you qualify for. The expensive mistakes are wrong sizing and a rushed install — not picking the "wrong" brand.

Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.

How we calculated this estimate

We start with 2026 national furnace replacement ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Peabody using the BLS metro wage data labor index (×1.14 here), the IECC cold-climate factor (×1.08) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.

This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.

By Serhat ÖzçelikReviewed by Costadia EditorialUpdated June 2026Sources: BLS · BEA · IECC · IRS · DSIRE · industry cost data

References & data sources

Our Peabody furnace replacement estimate is built from these primary, mostly government sources — not a single aggregator.

Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.