HVAC · Longview, WA
How much does furnace replacement cost in Longview, WA? (2026)
In Longview, furnace replacement runs $4,050–$7,250, with most paying around $5,650 — about 5% above the national average. Replacing a residential furnace, including the unit and installation labor.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $5,650
- Typical cost
- $5,650
- Labor vs US
- +1%
- Climate
- Mixed
- Local permit
- $225
Refine your estimate
Tune it to your home to narrow the furnace replacement range.
Key takeaways for Longview
- Priced about 5% above the national average, furnace replacement in Longview spans $4,050 to $7,250 — figure $5,650 for a standard job.
- Longview labor runs +1% versus the US average — the main reason the local price differs from the national figure.
- A HVAC permit in Longview runs about $225 — it's already folded into the estimate above.
- Service life runs 15–30 years on average; replacing on your schedule beats replacing on an emergency one.
- Skip peak pricing by scheduling in Spring and fall (Mar–May, Sep–Oct); the shift is worth about 5–15%.
- Federal 25C/25D tax credits and local utility rebates can lower the net cost — see the rebates section below.
What goes into the price in Longview
A typical Longview furnace replacement of $5,650 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Longview 2026 range |
|---|---|
| Materials & equipmentThe equipment and materials themselves — this part barely shifts by location. | $1,550 – $2,800 |
| Labor & installationThe installation work itself — removal, setup and startup — is what your city's labor rate actually moves. | $2,275 – $4,225 |
| Permit & feesWhat this city's building department charges for a HVAC permit. | $225 |
| Total installed cost | $4,050 – $7,250 |
Split from the Longview estimate using a 60% local-labor share; line items sum to the total.
Why furnace replacement costs what it does in Longview
- Longview's labor rates sit about 1% higher than the national average (based on price levels for the Longview-Kelso metro area), pushing the price up.
- A HVAC permit in Longview costs around $225, included above.
Furnace Replacement cost by home size in Longview
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| home size | Longview 2026 range |
|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,050 – $5,450 |
| 1,500 sq ft (≈68,000 BTU) | $3,550 – $6,250 |
| 2,000 sq ft (≈90,000 BTU) | $4,050 – $7,250 |
| 2,500 sq ft (≈110,000 BTU) | $4,650 – $8,250 |
| 3,000 sq ft (≈130,000 BTU) | $5,250 – $9,300 |
| 3,500+ sq ft (≈150,000 BTU) | $5,850 – $10,300 |
National size ranges localized to Longview labor and climate.
Furnace Replacement cost by type in Longview
| Gas furnace | $3,950 – $7,200 |
| High-efficiency gas furnace | $3,550 – $7,200 |
| Electric furnace | $2,250 – $4,750 |
Adjusted to Longview from national type-level ranges.
Furnace Replacement cost by efficiency in Longview
Efficiency is measured in AFUE — the percentage of fuel turned into heat. Higher AFUE costs more upfront but cuts fuel bills, and in cold (northern) regions the DOE requires ≥95% AFUE gas furnaces.
| 80% AFUE (standard)Lowest upfront; fine in mild climates | $3,250 – $5,750 |
| 90–95% AFUE (high-efficiency)Best all-round value in most regions | $4,050 – $7,250 |
| 96%+ AFUE (condensing, premium)Lowest fuel bills; required in cold zones | $5,250 – $9,800 |
Labor vs. materials in Longview
Install crew, removal, permit & startup — the part Longview rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $5,650 Longview project; your mix varies with scope.
How we estimate it
| National range | $3,800 – $7,000 |
| Longview labor adjustment | ×1.01 |
| mixed climate factor | ×1 |
| Local permit | +$225 |
| Longview estimate | $4,050 – $7,250 |
Promo prices vs. the real cost
That eye-catching install price in the ad is bait for a service visit, not the cost of a finished system — set it beside the real installed estimate above:
- "Free" replacement estimate$0 — it's a sales visit
- Seasonal tune-up promo$79–$129
- Financing offers$0 down · 0% APR, 12–60 mo
- Service call / diagnostic fee$75–$150
Additional furnace replacement costs to budget for
Expect a few of these rather than all. Which ones apply tracks with access, hidden damage and local code.
| Old furnace removal & disposal | $50 – $330 |
| New ductwork (vs. repair $300–$1,500)Only if ducts are missing or failing | $1,000 – $5,000 |
| Gas line run or upgrade | $250 – $800 |
| Chimney liner (for high-efficiency venting) | $600 – $2,500 |
| Smart thermostat | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Thermostat connection and system startup/testing
- The furnace unit and burner assembly
- Removal and disposal of the old unit
- Installation labor and basic ductwork connections
What affects the cost
- Heating capacity (BTU) needed for your square footage
- Condition of existing ductwork and venting
- Fuel type (gas vs electric) and AFUE efficiency rating
- Whether a chimney liner or new gas line is required
Ways to save on furnace replacement in Longview
- Look for utility rebates on high-efficiency models
- Right-size the unit; oversizing wastes money and cycles hard
- Schedule in the off-season (spring/summer) for better rates
- Get at least 3 quotes — installed prices vary widely
How long does furnace replacement last in Longview?
Gas furnaces typically last 15–20 years; well-maintained units can reach 30.
An annual tune-up keeps efficiency up and protects the warranty.
Signs you need furnace replacement in Longview
- The furnace is 15+ years old (near or past its service life)
- Heating bills keep climbing despite no change in usage
- Some rooms are warm while others stay cold (uneven heating)
- Frequent repairs — you've called for service more than once or twice recently
- Banging, rattling or screeching noises on startup
- A yellow or flickering burner flame instead of steady blue (have it checked immediately)
- More dust, dryness, or a stale smell when the heat runs
Repair or replace in Longview?
Repair if…
- The unit is under ~10 years old and otherwise efficient
- The fix is a single inexpensive part (igniter, flame sensor, capacitor)
- It's still under manufacturer warranty
Replace if…
- It's 15+ years old and needs a major part
- The heat exchanger is cracked (a safety issue — replace, don't repair)
- The repair costs more than about half of a new system
- It's an 80% AFUE unit and your fuel bills are high in a cold climate
Rebates & incentives in Washington
HEAR liveMost 2026 rebates reward switching to a heat pump, not a like-for-like gas furnace. Replacing a gas furnace, your savings are mainly utility efficiency rebates (high-AFUE models) — but pricing out a heat pump often qualifies you for far larger rebates.
- Washington Home Energy Rebates (HEAR) ↗WA Dept. of Commerce
$8,000+ toward a heat pump for eligible households; more when stacked with utility rebates.
Status: Washington's HEAR launched for income-qualifying households; stacking with utility programs can exceed $10,000.
The federal 25C tax credit (up to $2,000 for heat pumps; $600 for high-efficiency AC or furnaces) and the 25D credit ended December 31, 2025 under the One Big Beautiful Bill Act — neither is available for 2026 installs. The remaining federal help is the IRA Home Electrification & Appliance Rebates (HEAR): up to $8,000 toward a heat pump for households under 150% of area median income, paid at point of sale where a state has launched its program.
Verified July 2026. Rebate budgets deplete and program windows change fast — confirm current amounts and eligibility with your utility and the DSIRE database before you budget. Costadia does not administer these programs.
Cheapest time for furnace replacement in Longview
HVAC demand collapses in the mild shoulder seasons, so installers discount to keep crews busy. The most expensive time to buy is during a heat wave or cold snap, when a dead system forces a full-price emergency replacement.
Why furnace replacement quotes vary — and how to compare them fairly
When two quotes for one project diverge by thousands, the cause is usually what each one includes, not markup — here's how to read the difference.
Why a quote looks high (or low)
- One quote bundles ductwork, electrical, permit and old-unit removal; another quietly leaves them out.
- Sizing was guessed from square footage instead of a Manual J load calculation, so the equipment is wrong.
- Equipment tier isn't matched — a 14.3 SEER2 bid will always undercut an 18 SEER2 one for the "same" job.
Get an apples-to-apples bid
- Insist on a Manual J load calculation, not a square-footage guess.
- Require an itemized quote splitting equipment, labor, permit and add-ons.
- Ask every bidder for the same SEER2/AFUE rating so you compare like for like.
- Get at least three written bids before you sign.
Questions to ask Longview HVAC pros
Before you pick, make each contractor answer the same things — gaps in their replies tell you as much as the price.
- 1Did you run a Manual J load calculation to size the system, or estimate from square footage?
- 2What AFUE/SEER2 rating is this unit, and what's the payback vs. the next tier up?
- 3Is removal of the old equipment, the permit, and startup testing included in the quote?
- 4Will my existing ductwork and venting work as-is, or is repair/resizing needed?
- 5What's covered under the labor warranty vs. the manufacturer's parts warranty?
Furnace Replacement in Longview
How much does furnace replacement cost in Longview, WA?
Expect to pay $4,050 to $7,250 for furnace replacement in Longview in 2026 — most quotes cluster around $5,650. Longview labor rates, the mixed climate and permit fees each shift the total, and all three already sit inside this range.
Is furnace replacement more expensive in Longview than average?
Labor is the biggest lever here: at an index of 1.01 versus the US average, Longview ends up about 5% higher than the national average.; add in a HVAC permit at roughly $225.
Do I need a permit for furnace replacement in Longview?
Budget about $225 for the HVAC permit most Longview jobs like this require — and note it already sits inside the estimate above, not on top of it.
What affects furnace replacement cost the most?
Here's the short version: replacing a residential furnace, including the unit and installation labor. Four things drive the number more than anything else — equipment/material grade, home size and complexity, local labor, and your mixed climate zone.
How much should you really budget for HVAC in 2026?
What you pay for HVAC hinges less on the badge than on how the quote is built — the load calculation behind it, the efficiency tier, and the markup. Our take on where each one lands.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
The longevity case
The most expensive variable on the quote isn't the logo — it's whether the system is sized right and installed well. Oversize a premium unit and it short-cycles, wears fast and underperforms; commission a correctly sized mid-tier one and keep up the annual service, and it simply lasts longer. Spend on the installation, not the badge.
The brand on the unit matters far less than getting the sizing and installation right. Insist on a Manual J calculation, match efficiency to your climate, and claim every rebate available.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national furnace replacement ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Longview using the BEA Regional Price Parity labor index (×1.01 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$225). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote. Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Longview furnace replacement estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Furnace replacement alternatives in Longview
Often done together with furnace replacement in Longview
Bundling these shares labor and setup — and a single visit.
Homeowners in Longview often pair this with
A furnace replacement rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Longview
Browse local 2026 costs for every home project in Longview, WA.