HVAC · Kent, WA
How much does furnace replacement cost in Kent, WA? (2026)
In Kent, furnace replacement runs $4,800–$8,600, with most paying around $6,700 — about 24% above the national average. Replacing a residential furnace, including the unit and installation labor.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $6,700
- Typical cost
- $6,700
- Labor vs US
- +14%
- Climate
- Mixed
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the furnace replacement range.
Key takeaways for Kent
- A furnace replacement in Kent typically runs $4,800–$8,600, with most homeowners paying about $6,700 — about 24% above the national average.
- Local labor in Kent is +14% relative to the national average, which is what pushes this estimate away from the countrywide number.
- Set aside roughly $250 for the permit; that's already part of the range above, not an add-on.
- Service life runs 15–30 years on average; replacing on your schedule beats replacing on an emergency one.
- Cheapest time to buy: Spring and fall (Mar–May, Sep–Oct) — roughly 5–15% off peak-season pricing.
- The estimate above is before incentives; federal 25C/25D credits and utility rebates below can reduce what you actually pay.
What goes into the price in Kent
A typical Kent furnace replacement of $6,700 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Kent 2026 range |
|---|---|
| Materials & equipmentHardware and supplies for the job; national pricing applies almost everywhere you go. | $1,800 – $3,350 |
| Labor & installationCrew time for removal, installation and startup; local labor rates drive most of the swing here. | $2,750 – $5,000 |
| Permit & feesThe HVAC permit fee for this metro, based on local rates. | $250 |
| Total installed cost | $4,800 – $8,600 |
Split from the Kent estimate using a 60% local-labor share; line items sum to the total.
Why furnace replacement costs what it does in Kent
- Kent's labor rates sit about 14% higher than the national average (based on price levels for the Seattle-Tacoma-Bellevue metro area), pushing the price up.
- A HVAC permit in Kent costs around $250, included above.
Furnace Replacement cost by home size in Kent
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| home size | Kent 2026 range |
|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,600 – $6,450 |
| 1,500 sq ft (≈68,000 BTU) | $4,200 – $7,400 |
| 2,000 sq ft (≈90,000 BTU) | $4,800 – $8,600 |
| 2,500 sq ft (≈110,000 BTU) | $5,500 – $9,800 |
| 3,000 sq ft (≈130,000 BTU) | $6,200 – $10,950 |
| 3,500+ sq ft (≈150,000 BTU) | $6,900 – $12,150 |
National size ranges localized to Kent labor and climate.
Furnace Replacement cost by type in Kent
| Gas furnace | $4,650 – $8,450 |
| High-efficiency gas furnace | $4,200 – $8,450 |
| Electric furnace | $2,650 – $5,600 |
Adjusted to Kent from national type-level ranges.
Furnace Replacement cost by efficiency in Kent
Efficiency is measured in AFUE — the percentage of fuel turned into heat. Higher AFUE costs more upfront but cuts fuel bills, and in cold (northern) regions the DOE requires ≥95% AFUE gas furnaces.
| 80% AFUE (standard)Lowest upfront; fine in mild climates | $3,800 – $6,800 |
| 90–95% AFUE (high-efficiency)Best all-round value in most regions | $4,800 – $8,600 |
| 96%+ AFUE (condensing, premium)Lowest fuel bills; required in cold zones | $6,200 – $11,550 |
Labor vs. materials in Kent
Install crew, removal, permit & startup — the part Kent rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $6,700 Kent project; your mix varies with scope.
Skilled installers in the Seattle-Tacoma-Bellevue area earn about $41.1/hr (32% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your furnace replacement cost.
How we estimate it
| National range | $3,800 – $7,000 |
| Kent labor adjustment | ×1.19 |
| mixed climate factor | ×1 |
| Local permit | +$250 |
| Kent estimate | $4,800 – $8,600 |
Promo prices vs. the real cost
Before you're swayed by an ad, know that HVAC pricing has two layers — the marketing number and the actual installed cost. Here's what the marketing layer usually covers:
- Seasonal tune-up promo$79–$129
- Financing offers$0 down · 0% APR, 12–60 mo
- Service call / diagnostic fee$75–$150
- "Free" replacement estimate$0 — it's a sales visit
Additional furnace replacement costs to budget for
None of these are a given. What you actually pay hinges on the condition of the current system and how hard the site is to work in.
| Old furnace removal & disposal | $50 – $330 |
| New ductwork (vs. repair $300–$1,500)Only if ducts are missing or failing | $1,000 – $5,000 |
| Gas line run or upgrade | $250 – $800 |
| Chimney liner (for high-efficiency venting) | $600 – $2,500 |
| Smart thermostat | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Thermostat connection and system startup/testing
- Removal and disposal of the old unit
- Installation labor and basic ductwork connections
- The furnace unit and burner assembly
What affects the cost
- Whether a chimney liner or new gas line is required
- Fuel type (gas vs electric) and AFUE efficiency rating
- Heating capacity (BTU) needed for your square footage
- Condition of existing ductwork and venting
Ways to save on furnace replacement in Kent
- Get at least 3 quotes — installed prices vary widely
- Look for utility rebates on high-efficiency models
- Right-size the unit; oversizing wastes money and cycles hard
- Schedule in the off-season (spring/summer) for better rates
How long does furnace replacement last in Kent?
Gas furnaces typically last 15–20 years; well-maintained units can reach 30.
An annual tune-up keeps efficiency up and protects the warranty.
Signs you need furnace replacement in Kent
- The furnace is 15+ years old (near or past its service life)
- Heating bills keep climbing despite no change in usage
- Some rooms are warm while others stay cold (uneven heating)
- Frequent repairs — you've called for service more than once or twice recently
- Banging, rattling or screeching noises on startup
- A yellow or flickering burner flame instead of steady blue (have it checked immediately)
- More dust, dryness, or a stale smell when the heat runs
Repair or replace in Kent?
Repair if…
- The unit is under ~10 years old and otherwise efficient
- The fix is a single inexpensive part (igniter, flame sensor, capacitor)
- It's still under manufacturer warranty
Replace if…
- It's 15+ years old and needs a major part
- The heat exchanger is cracked (a safety issue — replace, don't repair)
- The repair costs more than about half of a new system
- It's an 80% AFUE unit and your fuel bills are high in a cold climate
Rebates & incentives in Washington
HEAR liveMost 2026 rebates reward switching to a heat pump, not a like-for-like gas furnace. Replacing a gas furnace, your savings are mainly utility efficiency rebates (high-AFUE models) — but pricing out a heat pump often qualifies you for far larger rebates.
- Washington Home Energy Rebates (HEAR) ↗WA Dept. of Commerce
$8,000+ toward a heat pump for eligible households; more when stacked with utility rebates.
Status: Washington's HEAR launched for income-qualifying households; stacking with utility programs can exceed $10,000.
The federal 25C tax credit (up to $2,000 for heat pumps; $600 for high-efficiency AC or furnaces) and the 25D credit ended December 31, 2025 under the One Big Beautiful Bill Act — neither is available for 2026 installs. The remaining federal help is the IRA Home Electrification & Appliance Rebates (HEAR): up to $8,000 toward a heat pump for households under 150% of area median income, paid at point of sale where a state has launched its program.
Verified July 2026. Rebate budgets deplete and program windows change fast — confirm current amounts and eligibility with your utility and the DSIRE database before you budget. Costadia does not administer these programs.
Cheapest time for furnace replacement in Kent
Installers cut prices in spring and fall because job volume drops and crews sit idle — the opposite happens during a summer heat wave or winter cold snap, when a dead system forces homeowners into a full-price emergency swap.
Why furnace replacement quotes vary — and how to compare them fairly
Price differences on an identical job trace back to the assumptions each contractor made; understand those and the 'expensive' bid often turns out fair.
Why a quote looks high (or low)
- One quote bundles ductwork, electrical, permit and old-unit removal; another quietly leaves them out.
- Equipment tier isn't matched — a 14.3 SEER2 bid will always undercut an 18 SEER2 one for the "same" job.
- Brand, warranty length and whether startup/commissioning is included all move the number.
Get an apples-to-apples bid
- Get at least three written bids before you sign.
- Require an itemized quote splitting equipment, labor, permit and add-ons.
- Confirm old-unit removal, the permit and startup testing are all included.
- Ask every bidder for the same SEER2/AFUE rating so you compare like for like.
Questions to ask Kent HVAC pros
Quotes only compare cleanly when every bidder is pricing the same work — put these to each of them before you commit.
- 1Did you run a Manual J load calculation to size the system, or estimate from square footage?
- 2What AFUE/SEER2 rating is this unit, and what's the payback vs. the next tier up?
- 3Is removal of the old equipment, the permit, and startup testing included in the quote?
- 4Will my existing ductwork and venting work as-is, or is repair/resizing needed?
- 5What's covered under the labor warranty vs. the manufacturer's parts warranty?
Furnace Replacement in Kent
How much does furnace replacement cost in Kent, WA?
In Kent, furnace replacement typically costs $4,800 to $8,600 in 2026, with most homeowners paying around $6,700. That range already accounts for Kent's labor rates, its mixed climate and local permit costs.
Is furnace replacement more expensive in Kent than average?
Yes — Kent is about 24% higher than the national average, largely a function of local labor pricing at 1.19× the US average. (a local HVAC permit tacks on about $250).
Do I need a permit for furnace replacement in Kent?
Most Kent jurisdictions require a HVAC permit for this work. Budget roughly $250 for the permit; it is already included in the estimate above.
What affects furnace replacement cost the most?
Here's the short version: replacing a residential furnace, including the unit and installation labor. Four things drive the number more than anything else — equipment/material grade, home size and complexity, local labor, and your mixed climate zone.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The budget-first case
Run a Manual J load calculation, then buy the standard tier — 80% AFUE, 14.3 SEER2 — and stop there. Where summers are short and winters are gentle, the equipment idles most of the year, so premium efficiency never gets enough runtime to earn back its price. Paying for SEER2 you'll rarely tap is the classic way a mild-climate homeowner overspends.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The efficiency-first case
Where you face brutal summers or hard winters, a higher SEER2/AFUE system or a heat pump runs enough hours to claw back its premium through lower bills — and utility or state rebates can still trim the sticker even though the federal 25C/25D credits closed at the end of 2025. Do the payback arithmetic before you reach for the cheapest box on the lot.
The brand on the unit matters far less than getting the sizing and installation right. Insist on a Manual J calculation, match efficiency to your climate, and claim every rebate available.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national furnace replacement ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Kent using the BLS metro wage data labor index (×1.19 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Kent furnace replacement estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Furnace replacement alternatives in Kent
Often done together with furnace replacement in Kent
Bundling these shares labor and setup — and a single visit.
Homeowners in Kent often pair this with
A furnace replacement rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Kent
Browse local 2026 costs for every home project in Kent, WA.