HVAC · Draper, UT
How much does furnace replacement cost in Draper, UT? (2026)
In Draper, furnace replacement runs $4,200–$7,550, with most paying around $5,900 — about 9% above the national average. Replacing a residential furnace, including the unit and installation labor.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $5,900
- Typical cost
- $5,900
- Labor vs US
- −5%
- Climate
- Cold
- Local permit
- $200
Refine your estimate
Tune it to your home to narrow the furnace replacement range.
Key takeaways for Draper
- Priced about 9% above the national average, furnace replacement in Draper spans $4,200 to $7,550 — figure $5,900 for a standard job.
- The −5% gap between Draper and national labor rates is the single biggest reason this price isn't the national average.
- A HVAC permit in Draper runs about $200 — it's already folded into the estimate above.
- Count on 15–30 years from a solid install; timing the next job yourself avoids the emergency premium.
- Roughly 5–15% comes off when you book in Spring and fall (Mar–May, Sep–Oct) instead of peak season.
- Check the rebates section below before you commit — 25C/25D federal credits and utility incentives can cut the net cost.
What goes into the price in Draper
A typical Draper furnace replacement of $5,900 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Draper 2026 range |
|---|---|
| Materials & equipmentUnit, materials and supplies — priced close to the national level. | $1,600 – $2,950 |
| Labor & installationThe installation work itself — removal, setup and startup — is what your city's labor rate actually moves. | $2,400 – $4,400 |
| Permit & feesLocal building-department fee for HVAC work here. | $200 |
| Total installed cost | $4,200 – $7,550 |
Split from the Draper estimate using a 60% local-labor share; line items sum to the total.
Why furnace replacement costs what it does in Draper
- Draper's labor rates sit about 5% lower than the national average (based on price levels for the Provo-Orem-Lehi metro area), pushing the price down.
- Because Draper sits in a cold climate zone, furnace replacement costs run about 8% higher than a neutral-climate baseline.
- Draper's HVAC permit runs roughly $200, which is already part of the number above.
Furnace Replacement cost by home size in Draper
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| home size | Draper 2026 range |
|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,150 – $5,650 |
| 1,500 sq ft (≈68,000 BTU) | $3,650 – $6,500 |
| 2,000 sq ft (≈90,000 BTU) | $4,200 – $7,550 |
| 2,500 sq ft (≈110,000 BTU) | $4,800 – $8,600 |
| 3,000 sq ft (≈130,000 BTU) | $5,450 – $9,650 |
| 3,500+ sq ft (≈150,000 BTU) | $6,050 – $10,700 |
National size ranges localized to Draper labor and climate.
Furnace Replacement cost by type in Draper
| Gas furnace | $4,100 – $7,450 |
| High-efficiency gas furnace | $3,650 – $7,450 |
| Electric furnace | $2,300 – $4,900 |
Adjusted to Draper from national type-level ranges.
Furnace Replacement cost by efficiency in Draper
Efficiency is measured in AFUE — the percentage of fuel turned into heat. Higher AFUE costs more upfront but cuts fuel bills, and in cold (northern) regions the DOE requires ≥95% AFUE gas furnaces.
| 80% AFUE (standard)Lowest upfront; fine in mild climates | $3,350 – $5,950 |
| 90–95% AFUE (high-efficiency)Best all-round value in most regions | $4,200 – $7,550 |
| 96%+ AFUE (condensing, premium)Lowest fuel bills; required in cold zones | $5,450 – $10,150 |
Labor vs. materials in Draper
Install crew, removal, permit & startup — the part Draper rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $5,900 Draper project; your mix varies with scope.
How we estimate it
| National range | $3,800 – $7,000 |
| Draper labor adjustment | ×0.97 |
| cold climate factor | ×1.08 |
| Local permit | +$200 |
| Draper estimate | $4,200 – $7,550 |
Promo prices vs. the real cost
A cheap headline number is usually a hook to get a technician in the door, not the price of the job. Compare it against the real installed estimate above:
- Financing offers$0 down · 0% APR, 12–60 mo
- "Free" replacement estimate$0 — it's a sales visit
- Service call / diagnostic fee$75–$150
- Seasonal tune-up promo$79–$129
Additional furnace replacement costs to budget for
Some of these land on the final invoice and some never surface — it comes down to your home's age, access and existing setup.
| Old furnace removal & disposal | $50 – $330 |
| New ductwork (vs. repair $300–$1,500)Only if ducts are missing or failing | $1,000 – $5,000 |
| Gas line run or upgrade | $250 – $800 |
| Chimney liner (for high-efficiency venting) | $600 – $2,500 |
| Smart thermostat | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- The furnace unit and burner assembly
- Installation labor and basic ductwork connections
- Removal and disposal of the old unit
- Thermostat connection and system startup/testing
What affects the cost
- Fuel type (gas vs electric) and AFUE efficiency rating
- Heating capacity (BTU) needed for your square footage
- Whether a chimney liner or new gas line is required
- Condition of existing ductwork and venting
Ways to save on furnace replacement in Draper
- Look for utility rebates on high-efficiency models
- Schedule in the off-season (spring/summer) for better rates
- Right-size the unit; oversizing wastes money and cycles hard
- Get at least 3 quotes — installed prices vary widely
How long does furnace replacement last in Draper?
Gas furnaces typically last 15–20 years; well-maintained units can reach 30.
An annual tune-up keeps efficiency up and protects the warranty.
Signs you need furnace replacement in Draper
- The furnace is 15+ years old (near or past its service life)
- Heating bills keep climbing despite no change in usage
- Some rooms are warm while others stay cold (uneven heating)
- Frequent repairs — you've called for service more than once or twice recently
- Banging, rattling or screeching noises on startup
- A yellow or flickering burner flame instead of steady blue (have it checked immediately)
- More dust, dryness, or a stale smell when the heat runs
Repair or replace in Draper?
Repair if…
- The unit is under ~10 years old and otherwise efficient
- The fix is a single inexpensive part (igniter, flame sensor, capacitor)
- It's still under manufacturer warranty
Replace if…
- It's 15+ years old and needs a major part
- The heat exchanger is cracked (a safety issue — replace, don't repair)
- The repair costs more than about half of a new system
- It's an 80% AFUE unit and your fuel bills are high in a cold climate
Rebates & incentives in Utah
Most 2026 rebates reward switching to a heat pump, not a like-for-like gas furnace. Replacing a gas furnace, your savings are mainly utility efficiency rebates (high-AFUE models) — but pricing out a heat pump often qualifies you for far larger rebates.
The federal 25C tax credit (up to $2,000 for heat pumps; $600 for high-efficiency AC or furnaces) and the 25D credit ended December 31, 2025 under the One Big Beautiful Bill Act — neither is available for 2026 installs. The remaining federal help is the IRA Home Electrification & Appliance Rebates (HEAR): up to $8,000 toward a heat pump for households under 150% of area median income, paid at point of sale where a state has launched its program.
Verified July 2026. Rebate budgets deplete and program windows change fast — confirm current amounts and eligibility with your utility and the DSIRE database before you budget. Costadia does not administer these programs.
Cheapest time for furnace replacement in Draper
Demand for HVAC work falls off a cliff in the shoulder months, and contractors discount to keep their crews booked. Wait for a 100-degree day or a hard freeze, though, and you're paying emergency rates for a system that just quit.
Why furnace replacement quotes vary — and how to compare them fairly
Price differences on an identical job trace back to the assumptions each contractor made; understand those and the 'expensive' bid often turns out fair.
Why a quote looks high (or low)
- Brand, warranty length and whether startup/commissioning is included all move the number.
- One quote bundles ductwork, electrical, permit and old-unit removal; another quietly leaves them out.
- Equipment tier isn't matched — a 14.3 SEER2 bid will always undercut an 18 SEER2 one for the "same" job.
Get an apples-to-apples bid
- Get at least three written bids before you sign.
- Confirm old-unit removal, the permit and startup testing are all included.
- Require an itemized quote splitting equipment, labor, permit and add-ons.
- Ask every bidder for the same SEER2/AFUE rating so you compare like for like.
Questions to ask Draper HVAC pros
Level the field before you choose — ask each bidder the same questions and watch how the answers differ.
- 1Did you run a Manual J load calculation to size the system, or estimate from square footage?
- 2What AFUE/SEER2 rating is this unit, and what's the payback vs. the next tier up?
- 3Is removal of the old equipment, the permit, and startup testing included in the quote?
- 4Will my existing ductwork and venting work as-is, or is repair/resizing needed?
- 5What's covered under the labor warranty vs. the manufacturer's parts warranty?
Furnace Replacement in Draper
How much does furnace replacement cost in Draper, UT?
Budgeting for furnace replacement? In Draper, 2026 prices land between $4,200 and $7,550, and about $5,900 is the typical outcome. That's not a national average — it's adjusted for Draper labor rates, cold-climate factors and permit fees.
Is furnace replacement more expensive in Draper than average?
Put Draper next to the national picture and it lands about 9% higher than the national average; the labor index of 0.97 explains the bulk of it. and the local HVAC permit costs about $200.
Do I need a permit for furnace replacement in Draper?
The estimate above already covers the HVAC permit Draper generally requires for this job, so the $200 or so it costs won't land as a surprise.
What affects furnace replacement cost the most?
Replacing a residential furnace, including the unit and installation labor. Where two homes diverge is in the details below. Grade of equipment and materials tops the list, followed by home size and complexity, local labor, and the cold climate zone.
How much should you really budget for HVAC in 2026?
Ask five contractors for an HVAC quote and you'll get five different numbers — usually because they disagree on sizing, efficiency and equipment tier. Here's how our editors think through those trade-offs.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
The budget-first case
Run a Manual J load calculation, then buy the standard tier — 80% AFUE, 14.3 SEER2 — and stop there. Where summers are short and winters are gentle, the equipment idles most of the year, so premium efficiency never gets enough runtime to earn back its price. Paying for SEER2 you'll rarely tap is the classic way a mild-climate homeowner overspends.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
Skip the brand debate. A correctly sized system, an efficiency tier that fits your climate, and a properly commissioned install will save you more than any label ever could.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national furnace replacement ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Draper using the BEA Regional Price Parity labor index (×0.97 here), the IECC cold-climate factor (×1.08) and a typical local permit fee (≈$200). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Draper furnace replacement estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Furnace replacement alternatives in Draper
Often done together with furnace replacement in Draper
Bundling these shares labor and setup — and a single visit.
Homeowners in Draper often pair this with
A furnace replacement rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Draper
Browse local 2026 costs for every home project in Draper, UT.