HVAC · Conway, AR
How much does furnace replacement cost in Conway, AR? (2026)
In Conway, furnace replacement runs $3,750–$6,750, with most paying around $5,250 — about 3% below the national average. Replacing a residential furnace, including the unit and installation labor.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $5,250
- Typical cost
- $5,250
- Labor vs US
- −11%
- Climate
- Mixed
- Local permit
- $200
Refine your estimate
Tune it to your home to narrow the furnace replacement range.
Key takeaways for Conway
- Priced about 3% below the national average, furnace replacement in Conway spans $3,750 to $6,750 — figure $5,250 for a standard job.
- Labor is the swing factor here: Conway trades bill −11% relative to the national average.
- A HVAC permit in Conway runs about $200 — it's already folded into the estimate above.
- A well-installed job here typically lasts 15–30 years — plan the next replacement instead of waiting for an emergency one.
- Cheapest time to buy: Spring and fall (Mar–May, Sep–Oct) — roughly 5–15% off peak-season pricing.
- Federal 25C/25D credits plus utility rebates sit below and can shave the final bill; the estimate here is pre-incentive.
What goes into the price in Conway
A typical Conway furnace replacement of $5,250 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Conway 2026 range |
|---|---|
| Materials & equipmentUnit, materials and supplies — priced close to the national level. | $1,400 – $2,600 |
| Labor & installationThe installation work itself — removal, setup and startup — is what your city's labor rate actually moves. | $2,150 – $3,950 |
| Permit & feesWhat this city's building department charges for a HVAC permit. | $200 |
| Total installed cost | $3,750 – $6,750 |
Split from the Conway estimate using a 60% local-labor share; line items sum to the total.
Why furnace replacement costs what it does in Conway
- Labor in Conway runs about 11% below the national average (based on price levels for the Little Rock-North Little Rock-Conway metro area), which lowers the installed price.
- Budget about $200 for the local HVAC permit in Conway — already folded into the estimate above.
Furnace Replacement cost by home size in Conway
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| home size | Conway 2026 range |
|---|---|
| 1,000 sq ft (≈45,000 BTU) | $2,800 – $5,050 |
| 1,500 sq ft (≈68,000 BTU) | $3,300 – $5,800 |
| 2,000 sq ft (≈90,000 BTU) | $3,750 – $6,750 |
| 2,500 sq ft (≈110,000 BTU) | $4,300 – $7,650 |
| 3,000 sq ft (≈130,000 BTU) | $4,850 – $8,600 |
| 3,500+ sq ft (≈150,000 BTU) | $5,450 – $9,550 |
National size ranges localized to Conway labor and climate.
Furnace Replacement cost by type in Conway
| Gas furnace | $3,650 – $6,600 |
| High-efficiency gas furnace | $3,250 – $6,600 |
| Electric furnace | $2,050 – $4,400 |
Adjusted to Conway from national type-level ranges.
Furnace Replacement cost by efficiency in Conway
Efficiency is measured in AFUE — the percentage of fuel turned into heat. Higher AFUE costs more upfront but cuts fuel bills, and in cold (northern) regions the DOE requires ≥95% AFUE gas furnaces.
| 80% AFUE (standard)Lowest upfront; fine in mild climates | $3,000 – $5,350 |
| 90–95% AFUE (high-efficiency)Best all-round value in most regions | $3,750 – $6,750 |
| 96%+ AFUE (condensing, premium)Lowest fuel bills; required in cold zones | $4,850 – $9,050 |
Labor vs. materials in Conway
Install crew, removal, permit & startup — the part Conway rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $5,250 Conway project; your mix varies with scope.
How we estimate it
| National range | $3,800 – $7,000 |
| Conway labor adjustment | ×0.93 |
| mixed climate factor | ×1 |
| Local permit | +$200 |
| Conway estimate | $3,750 – $6,750 |
Promo prices vs. the real cost
That eye-catching install price in the ad is bait for a service visit, not the cost of a finished system — set it beside the real installed estimate above:
- Service call / diagnostic fee$75–$150
- "Free" replacement estimate$0 — it's a sales visit
- Seasonal tune-up promo$79–$129
- Financing offers$0 down · 0% APR, 12–60 mo
Additional furnace replacement costs to budget for
Treat them as possibilities, not certainties — the ones that reach your quote follow your property's age and setup.
| Old furnace removal & disposal | $50 – $330 |
| New ductwork (vs. repair $300–$1,500)Only if ducts are missing or failing | $1,000 – $5,000 |
| Gas line run or upgrade | $250 – $800 |
| Chimney liner (for high-efficiency venting) | $600 – $2,500 |
| Smart thermostat | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Installation labor and basic ductwork connections
- Thermostat connection and system startup/testing
- The furnace unit and burner assembly
- Removal and disposal of the old unit
What affects the cost
- Heating capacity (BTU) needed for your square footage
- Fuel type (gas vs electric) and AFUE efficiency rating
- Whether a chimney liner or new gas line is required
- Condition of existing ductwork and venting
Ways to save on furnace replacement in Conway
- Right-size the unit; oversizing wastes money and cycles hard
- Schedule in the off-season (spring/summer) for better rates
- Look for utility rebates on high-efficiency models
- Get at least 3 quotes — installed prices vary widely
How long does furnace replacement last in Conway?
Gas furnaces typically last 15–20 years; well-maintained units can reach 30.
An annual tune-up keeps efficiency up and protects the warranty.
Signs you need furnace replacement in Conway
- The furnace is 15+ years old (near or past its service life)
- Heating bills keep climbing despite no change in usage
- Some rooms are warm while others stay cold (uneven heating)
- Frequent repairs — you've called for service more than once or twice recently
- Banging, rattling or screeching noises on startup
- A yellow or flickering burner flame instead of steady blue (have it checked immediately)
- More dust, dryness, or a stale smell when the heat runs
Repair or replace in Conway?
Repair if…
- The unit is under ~10 years old and otherwise efficient
- The fix is a single inexpensive part (igniter, flame sensor, capacitor)
- It's still under manufacturer warranty
Replace if…
- It's 15+ years old and needs a major part
- The heat exchanger is cracked (a safety issue — replace, don't repair)
- The repair costs more than about half of a new system
- It's an 80% AFUE unit and your fuel bills are high in a cold climate
Rebates & incentives in Arkansas
Most 2026 rebates reward switching to a heat pump, not a like-for-like gas furnace. Replacing a gas furnace, your savings are mainly utility efficiency rebates (high-AFUE models) — but pricing out a heat pump often qualifies you for far larger rebates.
The federal 25C tax credit (up to $2,000 for heat pumps; $600 for high-efficiency AC or furnaces) and the 25D credit ended December 31, 2025 under the One Big Beautiful Bill Act — neither is available for 2026 installs. The remaining federal help is the IRA Home Electrification & Appliance Rebates (HEAR): up to $8,000 toward a heat pump for households under 150% of area median income, paid at point of sale where a state has launched its program.
Verified July 2026. Rebate budgets deplete and program windows change fast — confirm current amounts and eligibility with your utility and the DSIRE database before you budget. Costadia does not administer these programs.
Cheapest time for furnace replacement in Conway
Demand for HVAC work falls off a cliff in the shoulder months, and contractors discount to keep their crews booked. Wait for a 100-degree day or a hard freeze, though, and you're paying emergency rates for a system that just quit.
Why furnace replacement quotes vary — and how to compare them fairly
When two quotes for one project diverge by thousands, the cause is usually what each one includes, not markup — here's how to read the difference.
Why a quote looks high (or low)
- One quote bundles ductwork, electrical, permit and old-unit removal; another quietly leaves them out.
- Equipment tier isn't matched — a 14.3 SEER2 bid will always undercut an 18 SEER2 one for the "same" job.
- Sizing was guessed from square footage instead of a Manual J load calculation, so the equipment is wrong.
Get an apples-to-apples bid
- Insist on a Manual J load calculation, not a square-footage guess.
- Confirm old-unit removal, the permit and startup testing are all included.
- Get at least three written bids before you sign.
- Ask every bidder for the same SEER2/AFUE rating so you compare like for like.
Questions to ask Conway HVAC pros
You can't judge bids side by side unless they cover the same ground; run through these with every pro on your list.
- 1Did you run a Manual J load calculation to size the system, or estimate from square footage?
- 2What AFUE/SEER2 rating is this unit, and what's the payback vs. the next tier up?
- 3Is removal of the old equipment, the permit, and startup testing included in the quote?
- 4Will my existing ductwork and venting work as-is, or is repair/resizing needed?
- 5What's covered under the labor warranty vs. the manufacturer's parts warranty?
Furnace Replacement in Conway
How much does furnace replacement cost in Conway, AR?
In Conway, furnace replacement typically costs $3,750 to $6,750 in 2026, with most homeowners paying around $5,250. Local labor, the mixed climate and permit fees are all baked into that number.
Is furnace replacement more expensive in Conway than average?
Because local labor indexes at 0.93 relative to the US average, Conway settles in about 3% lower than the national average. — the local HVAC permit, about $200, is part of that too.
Do I need a permit for furnace replacement in Conway?
The estimate above already covers the HVAC permit Conway generally requires for this job, so the $200 or so it costs won't land as a surprise.
What affects furnace replacement cost the most?
Replacing a residential furnace, including the unit and installation labor. That's the baseline — the price moves from there. The biggest drivers are equipment/material grade, the size and complexity of your home, local labor rates, and your climate zone (mixed).
How much should you really budget for HVAC in 2026?
Ask five contractors for an HVAC quote and you'll get five different numbers — usually because they disagree on sizing, efficiency and equipment tier. Here's how our editors think through those trade-offs.
The longevity case
The most expensive variable on the quote isn't the logo — it's whether the system is sized right and installed well. Oversize a premium unit and it short-cycles, wears fast and underperforms; commission a correctly sized mid-tier one and keep up the annual service, and it simply lasts longer. Spend on the installation, not the badge.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
The brand on the unit matters far less than getting the sizing and installation right. Insist on a Manual J calculation, match efficiency to your climate, and claim every rebate available.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national furnace replacement ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Conway using the BEA Regional Price Parity labor index (×0.93 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$200). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Conway furnace replacement estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Furnace replacement alternatives in Conway
Often done together with furnace replacement in Conway
Bundling these shares labor and setup — and a single visit.
Homeowners in Conway often pair this with
A furnace replacement rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Conway
Browse local 2026 costs for every home project in Conway, AR.