Wood & Fiberglass Window Replacement cost: Bellevue vs Marysville (2026)
The two metros aren't quite in sync on wood and fiberglass window replacement: Bellevue sits 14% above Marysville, or roughly $20,700 versus $18,200 — about $2,500 apart.
Bellevue WA
Typically around $20,700
Marysville WA
Lower costTypically around $18,200
Bellevue vs Marysville: full breakdown
| Factor | Bellevue | Marysville |
|---|---|---|
| Typical 2026 cost | $20,700 | $18,200 |
| Estimated range | $11,900–$29,500 | $10,450–$25,950 |
| Labor index (vs US) | ×1.18 | ×1.03 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $125 | $125 |
| Labor share | $11,400 | $10,000 |
| Materials/equipment | $9,300 | $8,200 |
These are 2026 planning figures for wood and fiberglass window replacement, localized to each city — not formal quotes.
Is the price difference a dealbreaker?
14% (about $2,500) is enough to notice on a wood and fiberglass window replacement budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Bellevue can close much of that gap.
Wood and fiberglass window replacement by type: Bellevue vs Marysville
Below, each wood and fiberglass window replacement option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Bellevue | Marysville |
|---|---|---|
| Fiberglass | $11,900–$26,000 | $10,450–$22,850 |
| Composite | $13,050–$27,150 | $11,500–$23,900 |
| Aluminum-clad wood | $15,400–$31,850 | $13,550–$28,000 |
| Solid wood | $16,600–$35,400 | $14,600–$31,100 |
Wood and fiberglass window replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Wood and fiberglass window replacement by number of windows: Bellevue vs Marysville
Wood and fiberglass windows are a premium upgrade — figure roughly $800–$2,500 per window installed depending on material, size, and finish. Cost scales with the number of openings, and wood typically runs higher than fiberglass.
| Size | Bellevue | Marysville |
|---|---|---|
| 5 windows | $5,400–$13,050 | $4,750–$11,500 |
| 10 windows | $10,700–$23,650 | $9,400–$20,800 |
| 15 windows | $16,000–$33,050 | $14,050–$29,050 |
| 20 windows | $21,300–$42,450 | $18,700–$37,300 |
| 25+ windows (whole home) | $26,000–$53,000 | $22,850–$46,600 |
Treat these as 2026 localized estimates for wood and fiberglass window replacement, not quotes from a contractor.
What windows pros earn in each metro
Roughly 55% of what you pay for wood and fiberglass window replacement is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
No BLS metro wage series for Marysville; we use Washington regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for wood and fiberglass window replacement in either city
Installers discount labor in the slow winter months, and manufacturers layer rebates on top during the same stretch — buying off-season means catching both at once instead of neither.
How much should new windows really cost you?
Windows are priced by frame, glass and install method — and homeowners often spend on the wrong one. Our editors on what's worth paying for.
The install case
The best window on the market still fails when it's set into a bad opening without proper flashing. If the existing frame is rotted, a full-frame replacement that reseals the opening outlasts a cheap pocket insert every time — let the home's condition, not the lowest bid, decide the method.
The value case
Double-pane, low-E vinyl is the workhorse spec for a reason: it handles the vast majority of drafts and heat loss without the price jump of premium materials. When you're replacing every window at once and watching the total, it's the default that leaves the least on the table.
The efficiency case
In extreme climates, triple-pane or premium low-E/gas-fill glass pays back in comfort and bills — and ENERGY STAR units may qualify for rebates. Spend on the glass package before the frame upgrade.
Spend where it counts — the glass package for your climate — and don't default to a premium frame material without a reason. Whatever you do, don't cut install quality to hit a budget number.
Bellevue vs Marysville
Is wood and fiberglass window replacement cheaper in Bellevue or Marysville?
Yes — Bellevue costs more. Expect around $20,700 for wood and fiberglass window replacement there against $18,200 in Marysville, about $2,500 (14%) apart in 2026.
Why does wood and fiberglass window replacement cost more in Bellevue than Marysville?
Labor rates explain most of it — 1.18 in Bellevue vs 1.03 in Marysville. A mixed climate versus mixed accounts for the rest.
How much is wood and fiberglass window replacement in Bellevue, WA?
In Bellevue, wood and fiberglass window replacement typically runs $11,900–$29,500 in 2026, with most homeowners paying around $20,700.
When is the cheapest time to buy wood and fiberglass window replacement — and does it differ by city?
No, the seasonal pattern is the same in Bellevue and Marysville: book during Late fall and winter for about 5–15% in savings. Spring and summer peak is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on wood and fiberglass window replacement cost?
Rarely. The $2,500 difference is real but one-time, and you can often close most of it in Bellevue by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare wood and fiberglass window replacement in other cities
Updated June 2026 · By Serhat Özçelik