Windows · Bellevue, WA
How much does wood and fiberglass window replacement cost in Bellevue, WA? (2026)
In Bellevue, wood and fiberglass window replacement runs $11,900–$29,500, with most paying around $20,700 — about 18% above the national average. Whole-home window replacement with premium wood or fiberglass windows — higher cost, better looks and longevity.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $20,700
- Typical cost
- $20,700
- Labor vs US
- +14%
- Climate
- Mixed
- Local permit
- $125
Refine your estimate
Tune it to your home to narrow the wood and fiberglass window replacement range.
Key takeaways for Bellevue
- Bellevue homeowners typically pay $11,900–$29,500 for wood and fiberglass window replacement, with $20,700 the usual landing spot — about 18% above the national average.
- Bellevue labor runs +14% versus the US average — the main reason the local price differs from the national figure.
- Around $125 of the range above goes to the local Windows permit, not an extra line item.
- A well-installed job here typically lasts 30–50 years — plan the next replacement instead of waiting for an emergency one.
- Cheapest time to buy: Late fall and winter — roughly 5–15% off peak-season pricing.
- Don't price this without checking the rebates section below — federal 25C/25D credits and local utility incentives can bring the net cost down.
What goes into the price in Bellevue
A typical Bellevue wood and fiberglass window replacement of $20,700 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Bellevue 2026 range |
|---|---|
| Materials & equipmentThe unit and materials — largely the same cost no matter which city you're in. | $5,300 – $13,200 |
| Labor & installationThe installation work itself — removal, setup and startup — is what your city's labor rate actually moves. | $6,475 – $16,175 |
| Permit & feesWhat this city's building department charges for a Windows permit. | $125 |
| Total installed cost | $11,900 – $29,500 |
Split from the Bellevue estimate using a 55% local-labor share; line items sum to the total.
Why wood and fiberglass window replacement costs what it does in Bellevue
- Expect labor here to run 14% above the national norm (based on price levels for the Seattle-Tacoma-Bellevue metro area) — that's what raises the total.
- Bellevue's Windows permit runs roughly $125, which is already part of the number above.
Wood & Fiberglass Window Replacement cost by number of windows in Bellevue
Wood and fiberglass windows are a premium upgrade — figure roughly $800–$2,500 per window installed depending on material, size, and finish. Cost scales with the number of openings, and wood typically runs higher than fiberglass.
| number of windows | Bellevue 2026 range |
|---|---|
| 5 windows | $5,400 – $13,050 |
| 10 windows | $10,700 – $23,650 |
| 15 windows | $16,000 – $33,050 |
| 20 windows | $21,300 – $42,450 |
| 25+ windows (whole home) | $26,000 – $53,000 |
National size ranges localized to Bellevue labor and climate.
Wood & Fiberglass Window Replacement cost by type in Bellevue
| Fiberglass | $11,950 – $26,100 |
| Composite | $13,100 – $27,250 |
| Aluminum-clad wood | $15,450 – $32,000 |
| Solid wood | $16,650 – $35,550 |
Adjusted to Bellevue from national type-level ranges.
Wood & Fiberglass Window Replacement cost by efficiency in Bellevue
Frame material sets the price and the look. Fiberglass is durable and low-maintenance; wood (often clad in aluminum outside) offers the richest appearance but costs more. The glass package adds on top. Prices are per window installed.
| Fiberglass frame (double-pane low-E)Strong, stable, very low maintenance | $850 – $1,750 |
| Wood frame / aluminum-clad woodPremium look; needs periodic finishing | $1,300 – $2,700 |
| Triple-pane premium (wood or fiberglass)Top efficiency and sound control | $1,750 – $3,400 |
Labor vs. materials in Bellevue
Install crew, removal, permit & startup — the part Bellevue rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $20,700 Bellevue project; your mix varies with scope.
Skilled installers in the Seattle-Tacoma-Bellevue area earn about $41.1/hr (32% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your wood and fiberglass window replacement cost.
How we estimate it
| National range | $10,000 – $25,000 |
| Bellevue labor adjustment | ×1.18 |
| mixed climate factor | ×1 |
| Local permit | +$125 |
| Bellevue estimate | $11,900 – $29,500 |
Promo prices vs. the real cost
Window companies market by the unit; real jobs price by the whole scope. Watch for this gap:
- Free in-home estimate$0 — it's a sales visit
- "Buy 2, get 2" / BOGO dealsdiscount is off an inflated list price
- Financing offers$0 down · 0% APR, 12–60 mo
- "From $189/window" teaserinstall, trim & disposal usually extra
Additional wood and fiberglass window replacement costs to budget for
Expect a few of these rather than all. Which ones apply tracks with access, hidden damage and local code.
| Old window removal & disposalPer window; usually bundled into the quote | $30 – $75 |
| Full-frame (vs. insert/pocket) replacementPer window; standard for wood to flash properly | $150 – $450 |
| Rotted sill / frame repairPer opening, found after removal | $200 – $800 |
| Custom or non-standard size / shapeBay, bow, arched, or oversized units cost more | $200 – $1,000 |
| Interior/exterior trim, casing & stainingPer window; wood often gets a stained finish | $100 – $400 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Old window removal
- Installation, flashing and sealing
- Premium wood or fiberglass windows
- Interior and exterior trim
What affects the cost
- Custom sizing and shapes
- Material (fiberglass vs solid wood vs clad)
- Historic or architectural matching
- Number of windows
Ways to save on wood and fiberglass window replacement in Bellevue
- Bundle the whole house in one job
- Fiberglass costs less than wood with similar looks
- Use premium only where visible, vinyl elsewhere
- Check efficiency rebates
How long does wood and fiberglass window replacement last in Bellevue?
Fiberglass lasts 30–50+ years; well-maintained wood can match it, but neglected wood rots far sooner.
Fiberglass is nearly maintenance-free. Wood (and the exterior of clad units) needs periodic repainting or re-staining and seal checks.
Signs you need wood and fiberglass window replacement in Bellevue
- Windows stick, swell, or are hard to open and close
- Fog or condensation appears between the panes (the seal has failed)
- Wood frames show rot, soft spots, peeling paint, or water staining
- You feel drafts near the window when it's shut
- They're single-pane originals and energy bills are high
- Visible warping, cracking, or daylight around the sash
- Outside noise comes through easily
Repair or replace in Bellevue?
Repair if…
- The wood frame is structurally sound and just needs refinishing or minor rot repair
- Only the seal, weatherstripping, or hardware has failed
- It's a historic or character window worth restoring
- The unit is under warranty
Replace if…
- Condensation is sealed between the panes (the IGU seal is gone)
- Rot has spread into the structural frame or sill
- They're single-pane and you want major energy savings
- Several windows are failing — bulk replacement lowers per-window cost
Climate-zone spec
What window rating you need in Bellevue, WA
Bellevue, WA sits in a mixed climate — the North-Central / South-Central ENERGY STAR window zone. To qualify for ENERGY STAR (v7.0), replacement windows here should meet:
Mixed climates need balance: a low U-factor for winter plus a controlled SHGC so summer sun doesn't overheat the home. Requirements tighten as you move south.
Thresholds from ENERGY STAR Residential Windows v7.0. Costadia groups cities into cold / mixed / hot bands — for your exact county's zone, use the ENERGY STAR Climate Zone Finder. Source.
Rebates & incentives
The federal window tax credit is gone for 2026, but ENERGY STAR windows can still earn utility rebates in some areas — and the real long-run savings come from lower heating and cooling bills.
- The federal 25C tax credit (up to $600/yr for ENERGY STAR Most Efficient windows) ended December 31, 2025 under the One Big Beautiful Bill Act — not available for 2026.
- Some utilities still rebate high-efficiency windows — real examples include Mass Save (~$75/window on single-pane replacements) and Puget Sound Energy (up to $100/window, more for income-qualified, through 2026).
- There is no federal HEAR rebate for windows (that program targets electrification equipment like heat pumps), so utility and state programs are the path — check the DSIRE database.
- The durable savings are on your energy bills: right-rated windows for your climate zone cut heating/cooling costs every year (see the climate-zone spec above).
Verified July 2026. Program budgets and windows change fast — confirm current amounts and eligibility with your utility and the DSIRE database. Costadia does not administer these programs.
Rebates & tax credits
The federal 25C window tax credit (30%, up to $600) ended December 31, 2025 and no longer applies to 2026 installs. ENERGY STAR Most Efficient wood or fiberglass windows still pay back through lower energy bills, and many utilities and states offer their own rebates — check the DSIRE database.
Cheapest time for wood and fiberglass window replacement in Bellevue
Installers discount labor in the slow winter months, and manufacturers layer rebates on top during the same stretch — buying off-season means catching both at once instead of neither.
Why wood and fiberglass window replacement quotes vary — and how to compare them fairly
A wide spread between bids rarely means someone is overcharging; it usually means they priced different work. Below is what moves the number and how to line the quotes up.
Why a quote looks high (or low)
- Trim, disposal and exterior flashing/caulking may be excluded.
- Frame material — vinyl, wood, fiberglass — is a big driver.
- Full-frame replacement costs more than an insert (pocket) install — make sure bids match.
Get an apples-to-apples bid
- Check warranties on frame, glass seal and labor separately.
- Match the glass package and ENERGY STAR rating across quotes.
- Confirm disposal, trim and flashing are included.
- Specify full-frame vs. insert for every bid.
Questions to ask Bellevue Windows pros
A fair comparison starts with identical questions. Ask each contractor the following before anything gets signed.
- 1Is this a full-frame replacement or an insert (pocket) install?
- 2What's the glass package — double vs. triple pane, low-E coating, gas fill?
- 3Are disposal, trim, and exterior caulking/flashing included?
- 4Are the windows ENERGY STAR rated for my climate zone?
- 5What's the warranty on the frame, glass seal, and the installation labor?
Wood & Fiberglass Window Replacement in Bellevue
How much does wood and fiberglass window replacement cost in Bellevue, WA?
Budgeting for wood and fiberglass window replacement? In Bellevue, 2026 prices land between $11,900 and $29,500, and about $20,700 is the typical outcome. Bellevue labor rates, the mixed climate and permit fees each shift the total, and all three already sit inside this range.
Is wood and fiberglass window replacement more expensive in Bellevue than average?
Labor is the biggest lever here: at an index of 1.18 versus the US average, Bellevue ends up about 18% higher than the national average. — the local Windows permit, about $125, is part of that too.
Do I need a permit for wood and fiberglass window replacement in Bellevue?
In Bellevue, this usually needs a Windows permit (around $125). The estimate above already accounts for it.
What affects wood and fiberglass window replacement cost the most?
Whole-home window replacement with premium wood or fiberglass windows — higher cost, better looks and longevity. Expect equipment/material grade, home size and complexity, local labor rates and the mixed climate zone to matter most here.
How much should new windows really cost you?
Windows are priced by frame, glass and install method — and homeowners often spend on the wrong one. Our editors on what's worth paying for.
The install case
A perfect window installed badly leaks and fails. Full-frame replacement with proper flashing beats a cheap pocket insert in a rotted opening — match the install method to your home's condition, not just the price.
The efficiency case
In extreme climates, triple-pane or premium low-E/gas-fill glass pays back in comfort and bills — and ENERGY STAR units may qualify for rebates. Spend on the glass package before the frame upgrade.
The value case
Vinyl, double-pane, low-E windows deliver most of the comfort and efficiency for the lowest price. For whole-home replacements on a budget, they're the sensible default.
Frame material is the safe place to economize; the glass package and the install are not. Pick glazing for the weather you actually live with, stay with vinyl unless there's a real reason to move up, and don't buy your way under budget by accepting a rushed install.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national wood and fiberglass window replacement ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Bellevue using the BLS metro wage data labor index (×1.18 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$125). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Bellevue wood and fiberglass window replacement estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Wood and fiberglass window replacement alternatives in Bellevue
Homeowners in Bellevue often pair this with
A wood and fiberglass window replacement rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Bellevue
Browse local 2026 costs for every home project in Bellevue, WA.