Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Lawton vs Moore (2026)

The two metros aren't quite in sync on tile roof installation: Lawton sits 5% below Moore, or roughly $16,400 versus $17,250 — about $850 apart.

Lawton OK

Lower cost
$9,800 $23,000

Typically around $16,400

Moore OK

$10,300 $24,150

Typically around $17,250

Moore costs about $850 (5%) more than Lawton for tile roof installation, largely because of the local labor rate gap.
Side by side

Lawton vs Moore: full breakdown

FactorLawtonMoore
Typical 2026 cost$16,400$17,250
Estimated range$9,800–$23,000$10,300–$24,150
Labor index (vs US)×0.91×0.96
Climate zoneMixedMixed
Climate factor×1×1
Local permit$250$250
Labor share$9,850$10,350
Materials/equipment$6,550$6,900

Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.

The verdict

How much should this gap actually matter?

That 5% gap is small — for tile roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.

By type

Tile roof installation by type: Lawton vs Moore

Each tile roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.

TypeLawtonMoore
Concrete tile$9,800$19,350$10,300$20,350
Clay / terracotta tile$13,000$25,750$13,650$27,000
Slate$18,450$45,750$19,350$48,050

Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

By size

Tile roof installation by roof size: Lawton vs Moore

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeLawtonMoore
1,000 sq ft (10 squares)$6,600$13,000$6,950$13,650
1,500 sq ft (15 squares)$8,450$17,550$8,850$18,400
2,000 sq ft (20 squares)$9,800$23,000$10,300$24,150
2,500 sq ft (25 squares)$12,100$27,550$12,700$28,950
3,000+ sq ft (30 squares)$14,800$33,000$15,550$34,650

All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.

Local labor reality

What roofing pros earn in each metro

Roughly 60% of what you pay for tile roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.

Lawton, OK
Modeled from state data

No BLS metro wage series for Lawton; we use Oklahoma regional price parity instead.

Moore, OK
$28.9/hr

Oklahoma City metro · about 7% below the US average installer wage.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for tile roof installation in either city

Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

The risk case

Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

Our take

Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.

FAQ

Lawton vs Moore

Is tile roof installation cheaper in Lawton or Moore?

In 2026, tile roof installation is cheaper in Lawton at about $16,400, versus $17,250 in Moore — a difference of about $850 (5%).

Why does tile roof installation cost more in Moore than Lawton?

It comes down to labor: Moore indexes at 0.96 against Lawton's 0.91. The mixed-vs-mixed climate difference adds to the gap.

How much is tile roof installation in Lawton, OK?

Lawton homeowners can expect $9,800 to $23,000 for tile roof installation in 2026, with $16,400 the typical number.

When is the cheapest time to buy tile roof installation — and does it differ by city?

The best window is the same in both Lawton and Moore: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.

Should I choose where to live based on tile roof installation cost?

Rarely. The $850 difference is real but one-time, and you can often close most of it in Moore by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik