Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Edmond vs Tulsa (2026)

Budget-wise, tile roof installation in Edmond ($17,250) runs 1% more than in Tulsa ($17,050), a roughly $200 spread.

Edmond OK

$10,300 $24,150

Typically around $17,250

Tulsa OK

Lower cost
$10,200 $23,900

Typically around $17,050

tile roof installation runs about $200 (1%) more in Edmond than in Tulsa, driven mostly by local labor rates.
Side by side

Edmond vs Tulsa: full breakdown

FactorEdmondTulsa
Typical 2026 cost$17,250$17,050
Estimated range$10,300–$24,150$10,200–$23,900
Labor index (vs US)×0.96×0.95
Climate zoneMixedMixed
Climate factor×1×1
Local permit$250$250
Labor share$10,350$10,250
Materials/equipment$6,900$6,800

All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.

The verdict

Is the price difference a dealbreaker?

A 1% difference on tile roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.

By type

Tile roof installation by type: Edmond vs Tulsa

We localize each tile roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.

TypeEdmondTulsa
Concrete tile$10,300$20,350$10,200$20,100
Clay / terracotta tile$13,650$27,000$13,500$26,750
Slate$19,350$48,050$19,150$47,550

These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.

By size

Tile roof installation by roof size: Edmond vs Tulsa

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeEdmondTulsa
1,000 sq ft (10 squares)$6,950$13,650$6,850$13,500
1,500 sq ft (15 squares)$8,850$18,400$8,750$18,200
2,000 sq ft (20 squares)$10,300$24,150$10,200$23,900
2,500 sq ft (25 squares)$12,700$28,950$12,550$28,650
3,000+ sq ft (30 squares)$15,550$34,650$15,400$34,300

Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

Local labor reality

What roofing pros earn in each metro

With labor making up about 60% of a tile roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.

Edmond, OK
$28.9/hr

Oklahoma City metro · about 7% below the US average installer wage.

Tulsa, OK
Modeled from state data

No BLS metro wage series for Tulsa; we use Oklahoma regional price parity instead.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for tile roof installation in either city

Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.

The risk case

Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.

The value case

Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.

The do-it-right case

A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.

Our take

Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.

FAQ

Edmond vs Tulsa

Is tile roof installation cheaper in Edmond or Tulsa?

Yes — Edmond costs more. Expect around $17,250 for tile roof installation there against $17,050 in Tulsa, about $200 (1%) apart in 2026.

Why does tile roof installation cost more in Edmond than Tulsa?

It comes down to labor: Edmond indexes at 0.96 against Tulsa's 0.95. The mixed-vs-mixed climate difference adds to the gap.

How much is tile roof installation in Edmond, OK?

tile roof installation in Edmond runs $10,300–$24,150 as of 2026 — most jobs land near $17,250.

When is the cheapest time to buy tile roof installation — and does it differ by city?

No, the seasonal pattern is the same in Edmond and Tulsa: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.

Should I choose where to live based on tile roof installation cost?

Not really — the $200 gap is one-time, and smart timing and tighter quotes in Edmond can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik