Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Edmond vs Lawton (2026)

Budget-wise, tile roof installation in Edmond ($17,250) runs 5% more than in Lawton ($16,400), a roughly $850 spread.

Edmond OK

$10,300 $24,150

Typically around $17,250

Lawton OK

Lower cost
$9,800 $23,000

Typically around $16,400

tile roof installation runs about $850 (5%) more in Edmond than in Lawton, driven mostly by local labor rates.
Side by side

Edmond vs Lawton: full breakdown

FactorEdmondLawton
Typical 2026 cost$17,250$16,400
Estimated range$10,300–$24,150$9,800–$23,000
Labor index (vs US)×0.96×0.91
Climate zoneMixedMixed
Climate factor×1×1
Local permit$250$250
Labor share$10,350$9,850
Materials/equipment$6,900$6,550

These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.

The verdict

How much should this gap actually matter?

That 5% gap is small — for tile roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.

By type

Tile roof installation by type: Edmond vs Lawton

We localize each tile roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.

TypeEdmondLawton
Concrete tile$10,300$20,350$9,800$19,350
Clay / terracotta tile$13,650$27,000$13,000$25,750
Slate$19,350$48,050$18,450$45,750

Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

By size

Tile roof installation by roof size: Edmond vs Lawton

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeEdmondLawton
1,000 sq ft (10 squares)$6,950$13,650$6,600$13,000
1,500 sq ft (15 squares)$8,850$18,400$8,450$17,550
2,000 sq ft (20 squares)$10,300$24,150$9,800$23,000
2,500 sq ft (25 squares)$12,700$28,950$12,100$27,550
3,000+ sq ft (30 squares)$15,550$34,650$14,800$33,000

Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

Local labor reality

What roofing pros earn in each metro

With labor making up about 60% of a tile roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.

Edmond, OK
$28.9/hr

Oklahoma City metro · about 7% below the US average installer wage.

Lawton, OK
Modeled from state data

No BLS metro wage series for Lawton; we use Oklahoma regional price parity instead.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for tile roof installation in either city

Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.

The do-it-right case

A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.

The risk case

The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

Our take

Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.

FAQ

Edmond vs Lawton

Is tile roof installation cheaper in Edmond or Lawton?

Lawton comes out ahead here, at roughly $16,400 for tile roof installation compared with $17,250 in Edmond — a 5% ($850) gap as of 2026.

Why does tile roof installation cost more in Edmond than Lawton?

It comes down to labor: Edmond indexes at 0.96 against Lawton's 0.91. The mixed-vs-mixed climate difference adds to the gap.

How much is tile roof installation in Edmond, OK?

In Edmond, tile roof installation typically runs $10,300–$24,150 in 2026, with most homeowners paying around $17,250.

When is the cheapest time to buy tile roof installation — and does it differ by city?

The best window is the same in both Edmond and Lawton: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.

Should I choose where to live based on tile roof installation cost?

That would be a stretch. $850 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Edmond can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik