Tile Roof Installation cost: Coon Rapids vs St. Paul (2026)
There's essentially no price gap here: tile roof installation runs close to $19,950 in both Coon Rapids and St. Paul in 2026.
Coon Rapids MN
Typically around $19,950
St. Paul MN
Typically around $19,950
Coon Rapids vs St. Paul: full breakdown
| Factor | Coon Rapids | St. Paul |
|---|---|---|
| Typical 2026 cost | $19,950 | $19,950 |
| Estimated range | $11,900–$27,950 | $11,900–$27,950 |
| Labor index (vs US) | ×1.11 | ×1.11 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $11,950 | $11,950 |
| Materials/equipment | $8,000 | $8,000 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.
No real cost edge either way
The two metros are effectively a wash for tile roof installation — pick on contractor quality and timing, not location.
Tile roof installation by type: Coon Rapids vs St. Paul
Every tile roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Coon Rapids | St. Paul |
|---|---|---|
| Concrete tile | $11,900–$23,550 | $11,900–$23,550 |
| Clay / terracotta tile | $15,800–$31,300 | $15,800–$31,300 |
| Slate | $22,450–$55,650 | $22,450–$55,650 |
Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.
Tile roof installation by roof size: Coon Rapids vs St. Paul
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Coon Rapids | St. Paul |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,800 | $8,050–$15,800 |
| 1,500 sq ft (15 squares) | $10,250–$21,350 | $10,250–$21,350 |
| 2,000 sq ft (20 squares) | $11,900–$27,950 | $11,900–$27,950 |
| 2,500 sq ft (25 squares) | $14,700–$33,500 | $14,700–$33,500 |
| 3,000+ sq ft (30 squares) | $18,000–$40,150 | $18,000–$40,150 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a tile roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Coon Rapids vs St. Paul
Is tile roof installation cheaper in Coon Rapids or St. Paul?
Practically identical — expect around $19,950 for tile roof installation whichever city you're in.
Why does tile roof installation cost more in St. Paul than Coon Rapids?
It comes down to labor: St. Paul indexes at 1.11 against Coon Rapids's 1.11. The cold-vs-cold climate difference adds to the gap.
How much is tile roof installation in Coon Rapids, MN?
tile roof installation in Coon Rapids runs $11,900–$27,950 as of 2026 — most jobs land near $19,950.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $36.7/hr in the Minneapolis-St. Paul-Bloomington area and $36.7/hr in Minneapolis-St. Paul-Bloomington. Given labor is around 60% of a tile roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy tile roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Coon Rapids and St. Paul (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on tile roof installation cost?
Cost shouldn't be the deciding factor between Coon Rapids and St. Paul — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik