Tile Roof Installation cost: Bloomington vs Coon Rapids (2026)
Bloomington and Coon Rapids are a near-perfect match on tile roof installation cost in 2026, both landing around $19,950.
Bloomington MN
Typically around $19,950
Coon Rapids MN
Typically around $19,950
Bloomington vs Coon Rapids: full breakdown
| Factor | Bloomington | Coon Rapids |
|---|---|---|
| Typical 2026 cost | $19,950 | $19,950 |
| Estimated range | $11,900–$27,950 | $11,900–$27,950 |
| Labor index (vs US) | ×1.11 | ×1.11 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $11,950 | $11,950 |
| Materials/equipment | $8,000 | $8,000 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
No real cost edge either way
With no real price gap on tile roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Tile roof installation by type: Bloomington vs Coon Rapids
Each tile roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Bloomington | Coon Rapids |
|---|---|---|
| Concrete tile | $11,900–$23,550 | $11,900–$23,550 |
| Clay / terracotta tile | $15,800–$31,300 | $15,800–$31,300 |
| Slate | $22,450–$55,650 | $22,450–$55,650 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Tile roof installation by roof size: Bloomington vs Coon Rapids
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Bloomington | Coon Rapids |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,800 | $8,050–$15,800 |
| 1,500 sq ft (15 squares) | $10,250–$21,350 | $10,250–$21,350 |
| 2,000 sq ft (20 squares) | $11,900–$27,950 | $11,900–$27,950 |
| 2,500 sq ft (25 squares) | $14,700–$33,500 | $14,700–$33,500 |
| 3,000+ sq ft (30 squares) | $18,000–$40,150 | $18,000–$40,150 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Labor is about 60% of a tile roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Bloomington vs Coon Rapids
Is tile roof installation cheaper in Bloomington or Coon Rapids?
There's no meaningful difference: tile roof installation runs about $19,950 in both places.
Why does tile roof installation cost more in Coon Rapids than Bloomington?
It comes down to labor: Coon Rapids indexes at 1.11 against Bloomington's 1.11. The cold-vs-cold climate difference adds to the gap.
How much is tile roof installation in Bloomington, MN?
Bloomington homeowners can expect $11,900 to $27,950 for tile roof installation in 2026, with $19,950 the typical number.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $36.7/hr in the Minneapolis-St. Paul-Bloomington area versus $36.7/hr around Minneapolis-St. Paul-Bloomington (BLS metro wage data). Since labor is roughly 60% of a tile roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy tile roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Bloomington and Coon Rapids (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on tile roof installation cost?
Not on this basis — Bloomington and Coon Rapids cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik