Tile Roof Installation cost: Clarksville vs Murfreesboro (2026)
Clarksville runs 2% lower than Murfreesboro for tile roof installation — expect around $17,050 in Clarksville against $17,450 in Murfreesboro, a difference of about $400.
Clarksville TN
Lower costTypically around $17,050
Murfreesboro TN
Typically around $17,450
Clarksville vs Murfreesboro: full breakdown
| Factor | Clarksville | Murfreesboro |
|---|---|---|
| Typical 2026 cost | $17,050 | $17,450 |
| Estimated range | $10,200–$23,900 | $10,400–$24,450 |
| Labor index (vs US) | ×0.95 | ×0.97 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $275 |
| Labor share | $10,250 | $10,450 |
| Materials/equipment | $6,800 | $7,000 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Is the gap worth worrying about?
At 2%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for tile roof installation — focus on the contractor, not the city.
Tile roof installation by type: Clarksville vs Murfreesboro
Every tile roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Clarksville | Murfreesboro |
|---|---|---|
| Concrete tile | $10,200–$20,100 | $10,400–$20,550 |
| Clay / terracotta tile | $13,500–$26,750 | $13,800–$27,350 |
| Slate | $19,150–$47,550 | $19,600–$48,600 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
Tile roof installation by roof size: Clarksville vs Murfreesboro
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Clarksville | Murfreesboro |
|---|---|---|
| 1,000 sq ft (10 squares) | $6,850–$13,500 | $7,050–$13,800 |
| 1,500 sq ft (15 squares) | $8,750–$18,200 | $8,950–$18,650 |
| 2,000 sq ft (20 squares) | $10,200–$23,900 | $10,400–$24,450 |
| 2,500 sq ft (25 squares) | $12,550–$28,650 | $12,850–$29,250 |
| 3,000+ sq ft (30 squares) | $15,400–$34,300 | $15,750–$35,050 |
Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a tile roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
No BLS metro wage series for Clarksville; we use Tennessee regional price parity instead.
Nashville-Davidson--Murfreesboro--Franklin metro · about 6% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Clarksville vs Murfreesboro
Is tile roof installation cheaper in Clarksville or Murfreesboro?
Yes — Murfreesboro costs more. Expect around $17,450 for tile roof installation there against $17,050 in Clarksville, about $400 (2%) apart in 2026.
Why does tile roof installation cost more in Murfreesboro than Clarksville?
Murfreesboro's higher labor index (0.97 vs 0.95 in Clarksville) is the biggest factor, with the mixed/mixed climate split and permit fee differences playing a smaller role.
How much is tile roof installation in Clarksville, TN?
tile roof installation in Clarksville runs $10,200–$23,900 as of 2026 — most jobs land near $17,050.
When is the cheapest time to buy tile roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Clarksville and Murfreesboro (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on tile roof installation cost?
That would be a stretch. $400 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Murfreesboro can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik