Tile Roof Installation cost: Broomfield vs Lakewood (2026)
Broomfield runs 9% lower than Lakewood for tile roof installation — expect around $18,050 in Broomfield against $19,650 in Lakewood, a difference of about $1,600.
Broomfield CO
Lower costTypically around $18,050
Lakewood CO
Typically around $19,650
Broomfield vs Lakewood: full breakdown
| Factor | Broomfield | Lakewood |
|---|---|---|
| Typical 2026 cost | $18,050 | $19,650 |
| Estimated range | $10,800–$25,300 | $11,750–$27,500 |
| Labor index (vs US) | ×1 | ×1.09 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $300 |
| Labor share | $10,850 | $11,800 |
| Materials/equipment | $7,200 | $7,850 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
How much should this gap actually matter?
A 9% spread (roughly $1,600) is significant enough to plan around, but not fixed — off-peak timing and sharper bidding in Lakewood typically recover some of it.
Tile roof installation by type: Broomfield vs Lakewood
Each tile roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Broomfield | Lakewood |
|---|---|---|
| Concrete tile | $10,800–$21,300 | $11,750–$23,150 |
| Clay / terracotta tile | $14,300–$28,300 | $15,550–$30,750 |
| Slate | $20,300–$50,300 | $22,050–$54,700 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
Tile roof installation by roof size: Broomfield vs Lakewood
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Broomfield | Lakewood |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,300–$14,300 | $7,900–$15,550 |
| 1,500 sq ft (15 squares) | $9,300–$19,300 | $10,100–$21,000 |
| 2,000 sq ft (20 squares) | $10,800–$25,300 | $11,750–$27,500 |
| 2,500 sq ft (25 squares) | $13,300–$30,300 | $14,450–$32,950 |
| 3,000+ sq ft (30 squares) | $16,300–$36,300 | $17,700–$39,500 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a tile roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
No BLS metro wage series for Broomfield; we use Colorado regional price parity instead.
Denver-Aurora-Centennial metro · about 15% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Broomfield vs Lakewood
Is tile roof installation cheaper in Broomfield or Lakewood?
Broomfield comes out ahead here, at roughly $18,050 for tile roof installation compared with $19,650 in Lakewood — a 9% ($1,600) gap as of 2026.
Why does tile roof installation cost more in Lakewood than Broomfield?
Labor rates explain most of it — 1.09 in Lakewood vs 1 in Broomfield. A cold climate versus cold, along with differing permit costs, accounts for the rest.
How much is tile roof installation in Broomfield, CO?
Expect to pay $10,800 to $25,300 for tile roof installation in Broomfield in 2026, averaging around $18,050.
When is the cheapest time to buy tile roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Broomfield and Lakewood (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on tile roof installation cost?
Not really — the $1,600 gap is one-time, and smart timing and tighter quotes in Lakewood can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik