Tile Roof Installation cost: Aurora vs Broomfield (2026)
Budget-wise, tile roof installation in Aurora ($19,650) runs 9% more than in Broomfield ($18,050), a roughly $1,600 spread.
Aurora CO
Typically around $19,650
Broomfield CO
Lower costTypically around $18,050
Aurora vs Broomfield: full breakdown
| Factor | Aurora | Broomfield |
|---|---|---|
| Typical 2026 cost | $19,650 | $18,050 |
| Estimated range | $11,750–$27,500 | $10,800–$25,300 |
| Labor index (vs US) | ×1.09 | ×1 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $275 |
| Labor share | $11,800 | $10,850 |
| Materials/equipment | $7,850 | $7,200 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
How much should this gap actually matter?
9% (about $1,600) is enough to notice on a tile roof installation budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Aurora can close much of that gap.
Tile roof installation by type: Aurora vs Broomfield
Below, each tile roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Aurora | Broomfield |
|---|---|---|
| Concrete tile | $11,750–$23,150 | $10,800–$21,300 |
| Clay / terracotta tile | $15,550–$30,750 | $14,300–$28,300 |
| Slate | $22,050–$54,700 | $20,300–$50,300 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Tile roof installation by roof size: Aurora vs Broomfield
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Aurora | Broomfield |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,900–$15,550 | $7,300–$14,300 |
| 1,500 sq ft (15 squares) | $10,100–$21,000 | $9,300–$19,300 |
| 2,000 sq ft (20 squares) | $11,750–$27,500 | $10,800–$25,300 |
| 2,500 sq ft (25 squares) | $14,450–$32,950 | $13,300–$30,300 |
| 3,000+ sq ft (30 squares) | $17,700–$39,500 | $16,300–$36,300 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Roughly 60% of what you pay for tile roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Denver-Aurora-Centennial metro · about 15% above the US average installer wage.
No BLS metro wage series for Broomfield; we use Colorado regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Aurora vs Broomfield
Is tile roof installation cheaper in Aurora or Broomfield?
Broomfield comes out ahead here, at roughly $18,050 for tile roof installation compared with $19,650 in Aurora — a 9% ($1,600) gap as of 2026.
Why does tile roof installation cost more in Aurora than Broomfield?
Aurora's higher labor index (1.09 vs 1 in Broomfield) is the biggest factor, with the cold/cold climate split and permit fee differences playing a smaller role.
How much is tile roof installation in Aurora, CO?
Expect to pay $11,750 to $27,500 for tile roof installation in Aurora in 2026, averaging around $19,650.
When is the cheapest time to buy tile roof installation — and does it differ by city?
No, the seasonal pattern is the same in Aurora and Broomfield: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on tile roof installation cost?
Probably not. Yes, $1,600 is a real gap, but it's a one-time cost you can partly offset in Aurora with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik