Tile Roof Installation cost: Bloomington vs Maplewood (2026)
Tile roof installation costs about the same in Bloomington and Maplewood in 2026 — roughly $19,950 in each.
Bloomington MN
Typically around $19,950
Maplewood MN
Typically around $19,950
Bloomington vs Maplewood: full breakdown
| Factor | Bloomington | Maplewood |
|---|---|---|
| Typical 2026 cost | $19,950 | $19,950 |
| Estimated range | $11,900–$27,950 | $11,900–$27,950 |
| Labor index (vs US) | ×1.11 | ×1.11 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $11,950 | $11,950 |
| Materials/equipment | $8,000 | $8,000 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Basically a tie — focus on the contractor
Neither metro has a cost edge on tile roof installation — spend your decision-making energy on the contractor, not the location.
Tile roof installation by type: Bloomington vs Maplewood
Below, each tile roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Bloomington | Maplewood |
|---|---|---|
| Concrete tile | $11,900–$23,550 | $11,900–$23,550 |
| Clay / terracotta tile | $15,800–$31,300 | $15,800–$31,300 |
| Slate | $22,450–$55,650 | $22,450–$55,650 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
Tile roof installation by roof size: Bloomington vs Maplewood
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Bloomington | Maplewood |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,800 | $8,050–$15,800 |
| 1,500 sq ft (15 squares) | $10,250–$21,350 | $10,250–$21,350 |
| 2,000 sq ft (20 squares) | $11,900–$27,950 | $11,900–$27,950 |
| 2,500 sq ft (25 squares) | $14,700–$33,500 | $14,700–$33,500 |
| 3,000+ sq ft (30 squares) | $18,000–$40,150 | $18,000–$40,150 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Roughly 60% of what you pay for tile roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Bloomington vs Maplewood
Is tile roof installation cheaper in Bloomington or Maplewood?
Not really — both cities land at almost the same number for tile roof installation, around $19,950 each.
Why does tile roof installation cost more in Maplewood than Bloomington?
It comes down to labor: Maplewood indexes at 1.11 against Bloomington's 1.11. The cold-vs-cold climate difference adds to the gap.
How much is tile roof installation in Bloomington, MN?
In Bloomington, tile roof installation typically runs $11,900–$27,950 in 2026, with most homeowners paying around $19,950.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $36.7/hr in Minneapolis-St. Paul-Bloomington compared with $36.7/hr in Minneapolis-St. Paul-Bloomington (BLS OEWS). Labor is about 60% of a tile roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy tile roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Bloomington and Maplewood, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on tile roof installation cost?
There's no cost argument here between Bloomington and Maplewood — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik