Tile Roof Installation cost: Bloomington vs Rochester (2026)
The two metros aren't quite in sync on tile roof installation: Bloomington sits 16% above Rochester, or roughly $19,950 versus $17,150 — about $2,800 apart.
Bloomington MN
Typically around $19,950
Rochester MN
Lower costTypically around $17,150
Bloomington vs Rochester: full breakdown
| Factor | Bloomington | Rochester |
|---|---|---|
| Typical 2026 cost | $19,950 | $17,150 |
| Estimated range | $11,900–$27,950 | $10,250–$24,050 |
| Labor index (vs US) | ×1.11 | ×0.95 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $250 |
| Labor share | $11,950 | $10,300 |
| Materials/equipment | $8,000 | $6,850 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.
How much should this gap actually matter?
A 16% gap is meaningful on a project this size — about $2,800. That's real money, but it's often within reach of off-season timing and a tighter apples-to-apples bid in Bloomington.
Tile roof installation by type: Bloomington vs Rochester
Each tile roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Bloomington | Rochester |
|---|---|---|
| Concrete tile | $11,900–$23,550 | $10,250–$20,250 |
| Clay / terracotta tile | $15,800–$31,300 | $13,600–$26,900 |
| Slate | $22,450–$55,650 | $19,300–$47,850 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
Tile roof installation by roof size: Bloomington vs Rochester
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Bloomington | Rochester |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,800 | $6,900–$13,600 |
| 1,500 sq ft (15 squares) | $10,250–$21,350 | $8,800–$18,350 |
| 2,000 sq ft (20 squares) | $11,900–$27,950 | $10,250–$24,050 |
| 2,500 sq ft (25 squares) | $14,700–$33,500 | $12,650–$28,800 |
| 3,000+ sq ft (30 squares) | $18,000–$40,150 | $15,500–$34,500 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a tile roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
No BLS metro wage series for Rochester; we use Minnesota regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Bloomington vs Rochester
Is tile roof installation cheaper in Bloomington or Rochester?
In 2026, tile roof installation is cheaper in Rochester at about $17,150, versus $19,950 in Bloomington — a difference of about $2,800 (16%).
Why does tile roof installation cost more in Bloomington than Rochester?
Bloomington's higher labor index (1.11 vs 0.95 in Rochester) is the biggest factor, with the cold/cold climate split and permit fee differences playing a smaller role.
How much is tile roof installation in Bloomington, MN?
tile roof installation in Bloomington runs $11,900–$27,950 as of 2026 — most jobs land near $19,950.
When is the cheapest time to buy tile roof installation — and does it differ by city?
The best window is the same in both Bloomington and Rochester: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on tile roof installation cost?
Not really — the $2,800 gap is one-time, and smart timing and tighter quotes in Bloomington can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik