Tile Roof Installation cost: Bloomington vs Brooklyn Park (2026)
Tile roof installation costs about the same in Bloomington and Brooklyn Park in 2026 — roughly $19,950 in each.
Bloomington MN
Typically around $19,950
Brooklyn Park MN
Typically around $19,950
Bloomington vs Brooklyn Park: full breakdown
| Factor | Bloomington | Brooklyn Park |
|---|---|---|
| Typical 2026 cost | $19,950 | $19,950 |
| Estimated range | $11,900–$27,950 | $11,900–$27,950 |
| Labor index (vs US) | ×1.11 | ×1.11 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $11,950 | $11,950 |
| Materials/equipment | $8,000 | $8,000 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
No real cost edge either way
With no real price gap on tile roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Tile roof installation by type: Bloomington vs Brooklyn Park
Below, each tile roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Bloomington | Brooklyn Park |
|---|---|---|
| Concrete tile | $11,900–$23,550 | $11,900–$23,550 |
| Clay / terracotta tile | $15,800–$31,300 | $15,800–$31,300 |
| Slate | $22,450–$55,650 | $22,450–$55,650 |
Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.
Tile roof installation by roof size: Bloomington vs Brooklyn Park
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Bloomington | Brooklyn Park |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,800 | $8,050–$15,800 |
| 1,500 sq ft (15 squares) | $10,250–$21,350 | $10,250–$21,350 |
| 2,000 sq ft (20 squares) | $11,900–$27,950 | $11,900–$27,950 |
| 2,500 sq ft (25 squares) | $14,700–$33,500 | $14,700–$33,500 |
| 3,000+ sq ft (30 squares) | $18,000–$40,150 | $18,000–$40,150 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
About 60% of a tile roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Bloomington vs Brooklyn Park
Is tile roof installation cheaper in Bloomington or Brooklyn Park?
Not really — both cities land at almost the same number for tile roof installation, around $19,950 each.
Why does tile roof installation cost more in Brooklyn Park than Bloomington?
It comes down to labor: Brooklyn Park indexes at 1.11 against Bloomington's 1.11. The cold-vs-cold climate difference adds to the gap.
How much is tile roof installation in Bloomington, MN?
tile roof installation in Bloomington runs $11,900–$27,950 as of 2026 — most jobs land near $19,950.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $36.7/hr in the Minneapolis-St. Paul-Bloomington area and $36.7/hr in Minneapolis-St. Paul-Bloomington. Given labor is around 60% of a tile roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy tile roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Bloomington and Brooklyn Park, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on tile roof installation cost?
No — the cost is essentially identical between Bloomington and Brooklyn Park. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik