Tile Roof Installation cost: Billings vs Great Falls (2026)
Budget-wise, tile roof installation in Billings ($17,150) runs 1% more than in Great Falls ($17,050), a roughly $100 spread.
Billings MT
Typically around $17,150
Great Falls MT
Lower costTypically around $17,050
Billings vs Great Falls: full breakdown
| Factor | Billings | Great Falls |
|---|---|---|
| Typical 2026 cost | $17,150 | $17,050 |
| Estimated range | $10,250–$24,050 | $10,200–$23,900 |
| Labor index (vs US) | ×0.95 | ×0.95 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $10,300 | $10,250 |
| Materials/equipment | $6,850 | $6,800 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Is the gap worth worrying about?
At 1%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for tile roof installation — focus on the contractor, not the city.
Tile roof installation by type: Billings vs Great Falls
Every tile roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Billings | Great Falls |
|---|---|---|
| Concrete tile | $10,250–$20,250 | $10,200–$20,100 |
| Clay / terracotta tile | $13,600–$26,900 | $13,500–$26,750 |
| Slate | $19,300–$47,850 | $19,150–$47,550 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.
Tile roof installation by roof size: Billings vs Great Falls
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Billings | Great Falls |
|---|---|---|
| 1,000 sq ft (10 squares) | $6,900–$13,600 | $6,850–$13,500 |
| 1,500 sq ft (15 squares) | $8,800–$18,350 | $8,750–$18,200 |
| 2,000 sq ft (20 squares) | $10,250–$24,050 | $10,200–$23,900 |
| 2,500 sq ft (25 squares) | $12,650–$28,800 | $12,550–$28,650 |
| 3,000+ sq ft (30 squares) | $15,500–$34,500 | $15,400–$34,300 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.
Cheapest time for tile roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often unlocks off-season pricing.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Billings vs Great Falls
Is tile roof installation cheaper in Billings or Great Falls?
In 2026, tile roof installation is cheaper in Great Falls at about $17,050, versus $17,150 in Billings — a difference of about $100 (1%).
Why does tile roof installation cost more in Billings than Great Falls?
Billings's higher labor index (0.95 vs 0.95 in Great Falls) is the biggest factor, with the cold/cold climate split playing a smaller role.
How much is tile roof installation in Billings, MT?
Expect to pay $10,250 to $24,050 for tile roof installation in Billings in 2026, averaging around $17,150.
When is the cheapest time to buy tile roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Billings and Great Falls, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on tile roof installation cost?
Rarely. The $100 difference is real but one-time, and you can often close most of it in Billings by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik