Roofing · Billings, MT
How much does tile roof installation cost in Billings, MT? (2026)
In Billings, tile roof installation runs $10,250–$24,050, with most paying around $17,150 — about 3% below the national average. Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $17,150
- Typical cost
- $17,150
- Labor vs US
- −8%
- Climate
- Cold
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the tile roof installation range.
Key takeaways for Billings
- Billings homeowners typically pay $10,250–$24,050 for tile roof installation, with $17,150 the usual landing spot — about 3% below the national average.
- Local labor in Billings is −8% relative to the national average, which is what pushes this estimate away from the countrywide number.
- Budget about $250 for the local Roofing permit; it's already included above.
- Expect 50–100 years of service, so planning a replacement beats a full-price emergency call.
- Late spring to early fall (dry, 45–85°F) is the low-price window — about 5–10% under peak rates.
What goes into the price in Billings
A typical Billings tile roof installation of $17,150 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Billings 2026 range |
|---|---|
| Materials & equipmentUnit, materials and supplies — priced close to the national level. | $4,000 – $9,500 |
| Labor & installationCrew time for removal, installation and startup; local labor rates drive most of the swing here. | $6,000 – $14,300 |
| Permit & feesWhat this city's building department charges for a Roofing permit. | $250 |
| Total installed cost | $10,250 – $24,050 |
Split from the Billings estimate using a 60% local-labor share; line items sum to the total.
Why tile roof installation costs what it does in Billings
- Labor in Billings runs about 8% below the national average (based on price levels for the Billings metro area), which lowers the installed price.
- A Roofing permit in Billings costs around $250, included above.
Tile Roof Installation cost by roof size in Billings
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| roof size | Billings 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $6,900 – $13,600 |
| 1,500 sq ft (15 squares) | $8,800 – $18,350 |
| 2,000 sq ft (20 squares) | $10,250 – $24,050 |
| 2,500 sq ft (25 squares) | $12,650 – $28,800 |
| 3,000+ sq ft (30 squares) | $15,500 – $34,500 |
National size ranges localized to Billings labor and climate.
Tile Roof Installation cost by type in Billings
| Concrete tile | $10,250 – $20,200 |
| Clay / terracotta tile | $13,550 – $26,850 |
| Slate | $19,250 – $47,750 |
Adjusted to Billings from national type-level ranges.
Tile Roof Installation cost by efficiency in Billings
Concrete is the affordable workhorse; clay (terracotta) holds its color and resists fade in hot, sunny climates; slate is the premium natural-stone option with the longest life.
| Concrete tileLowest-cost tile; heavy; ~50 yr life | $10,250 – $19,300 |
| Clay / terracotta tileFade-resistant, ideal in hot/coastal climates; 50–100 yr | $13,600 – $24,050 |
| Natural slatePremium stone; 75–100+ yr life | $19,300 – $43,100 |
Labor vs. materials in Billings
Install crew, removal, permit & startup — the part Billings rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $17,150 Billings project; your mix varies with scope.
How we estimate it
| National range | $10,500 – $25,000 |
| Billings labor adjustment | ×0.95 |
| cold climate factor | ×1 |
| Local permit | +$250 |
| Billings estimate | $10,250 – $24,050 |
Promo prices vs. the real cost
Roofing promotions spike after bad weather, and so does the gap between advertised and actual cost. Confirm scope first:
- Per-square teaser priceadvertised low; varies by pitch & material
- Financing offers$0 down · low APR
- Free roof inspection$0 — it's a sales visit
Additional tile roof installation costs to budget for
Expect a few of these rather than all. Which ones apply tracks with access, hidden damage and local code.
| Tear-off & disposal of old roofTile is heavy — disposal costs more than asphalt | $1,000 – $4,000 |
| Structural reinforcement for tile weightOften required; tile is much heavier than asphalt | $1,000 – $10,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-grade, replaced mid-life)Underlayment wears out before the tile and is re-done | $500 – $2,500 |
| Flashing, valleys & ridge work | $500 – $2,500 |
| Permit | $200 – $600 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Labor, cleanup and permit
- Reinforced underlayment and battens
- Concrete or clay tiles
- Tear-off and structural check
What affects the cost
- Roof structure may need reinforcement for tile weight
- Specialty flashing and ridge work
- Pitch, complexity and hip/valley count
- Concrete vs clay tile
Ways to save on tile roof installation in Billings
- Reuse intact tiles where possible on repairs
- Concrete tile costs less than clay with similar life
- Tiles last 50+ years — strong lifetime value
- Confirm framing can carry the load before buying
How long does tile roof installation last in Billings?
Concrete tile lasts ~50 years; clay and slate 75–100+. The underlayment beneath is usually replaced once mid-life.
Inspect for cracked or slipped tiles and clear debris; the bigger periodic cost is replacing worn underlayment.
Signs you need tile roof installation in Billings
- Cracked, chipped, or broken tiles after hail, foot traffic, or freeze-thaw
- Slipped or missing tiles leaving gaps in the field
- Leaks or attic moisture pointing to failed underlayment beneath sound tiles
- Efflorescence, deep staining, or flaking on the tile surface
- Sagging areas — a sign the structure is straining under the weight
- Failed flashing in valleys or around penetrations
Repair or replace in Billings?
Repair if…
- Only a handful of tiles are cracked or slipped
- The underlayment is still sound and leaks are isolated
- Flashing has failed but tiles and structure are fine
Replace if…
- The underlayment has failed across the roof (consider a lift-and-relay first)
- Widespread tile cracking or fading from age or hail
- The roof structure is sagging or can't support the load
Cost calculator
Roof cost by material in Billings, MT
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Billings, MT labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,650–$11,400 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,600–$15,200 | $450/yr |
Standing-seam metal High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,100–$30,400 | $450/yr |
Clay / concrete tileThis page Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,000–$38,000 | $450/yr |
Per-square ranges are national installed benchmarks localized to Billings, MT labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for tile roof installation in Billings
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Why tile roof installation quotes vary — and how to compare them fairly
A wide spread between bids rarely means someone is overcharging; it usually means they priced different work. Below is what moves the number and how to line the quotes up.
Why a quote looks high (or low)
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
Get an apples-to-apples bid
- Ask how deck/sheathing repairs are priced if rot is found.
- Verify the contractor is licensed, insured and local, with recent references.
- Specify tear-off vs. overlay so all bids match.
- Compare the workmanship warranty, not just the material warranty.
Questions to ask Billings Roofing pros
Before you pick, make each contractor answer the same things — gaps in their replies tell you as much as the price.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Tile Roof Installation in Billings
How much does tile roof installation cost in Billings, MT?
tile roof installation in Billings runs $10,250–$24,050 as of 2026, with $17,150 the figure most homeowners actually land on. That's not a national average — it's adjusted for Billings labor rates, cold-climate factors and permit fees.
Is tile roof installation more expensive in Billings than average?
Yes — Billings is about 3% lower than the national average, largely a function of local labor pricing at 0.95× the US average., and factor in about $250 for the local Roofing permit.
Do I need a permit for tile roof installation in Billings?
The estimate above already covers the Roofing permit Billings generally requires for this job, so the $250 or so it costs won't land as a surprise.
What affects tile roof installation cost the most?
In plain terms, installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates. What moves the price most: equipment or material grade, your home's size and complexity, local labor rates, and the cold climate zone.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national tile roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Billings using the BEA Regional Price Parity labor index (×0.95 here), the IECC cold-climate factor (×1) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Billings tile roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Tile roof installation alternatives in Billings
Homeowners in Billings often pair this with
A tile roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Billings
Browse local 2026 costs for every home project in Billings, MT.