Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Beloit vs Racine (2026)

The two metros aren't quite in sync on tile roof installation: Beloit sits 1% above Racine, or roughly $17,150 versus $17,050 — about $100 apart.

Beloit WI

$10,250 $24,050

Typically around $17,150

Racine WI

Lower cost
$10,200 $23,900

Typically around $17,050

tile roof installation runs about $100 (1%) more in Beloit than in Racine, driven mostly by local labor rates.
Side by side

Beloit vs Racine: full breakdown

FactorBeloitRacine
Typical 2026 cost$17,150$17,050
Estimated range$10,250–$24,050$10,200–$23,900
Labor index (vs US)×0.95×0.95
Climate zoneColdCold
Climate factor×1×1
Local permit$250$250
Labor share$10,300$10,250
Materials/equipment$6,850$6,800

These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.

The verdict

How much should this gap actually matter?

A 1% difference on tile roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.

By type

Tile roof installation by type: Beloit vs Racine

Every tile roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeBeloitRacine
Concrete tile$10,250$20,250$10,200$20,100
Clay / terracotta tile$13,600$26,900$13,500$26,750
Slate$19,300$47,850$19,150$47,550

These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.

By size

Tile roof installation by roof size: Beloit vs Racine

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeBeloitRacine
1,000 sq ft (10 squares)$6,900$13,600$6,850$13,500
1,500 sq ft (15 squares)$8,800$18,350$8,750$18,200
2,000 sq ft (20 squares)$10,250$24,050$10,200$23,900
2,500 sq ft (25 squares)$12,650$28,800$12,550$28,650
3,000+ sq ft (30 squares)$15,500$34,500$15,400$34,300

Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.

Best time to buy

Cheapest time for tile roof installation in either city

Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

The do-it-right case

Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.

Our take

Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.

FAQ

Beloit vs Racine

Is tile roof installation cheaper in Beloit or Racine?

Racine comes out ahead here, at roughly $17,050 for tile roof installation compared with $17,150 in Beloit — a 1% ($100) gap as of 2026.

Why does tile roof installation cost more in Beloit than Racine?

Beloit's higher labor index (0.95 vs 0.95 in Racine) is the biggest factor, with the cold/cold climate split playing a smaller role.

How much is tile roof installation in Beloit, WI?

In Beloit, tile roof installation typically runs $10,250–$24,050 in 2026, with most homeowners paying around $17,150.

When is the cheapest time to buy tile roof installation — and does it differ by city?

It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Beloit and Racine (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.

Should I choose where to live based on tile roof installation cost?

That would be a stretch. $100 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Beloit can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik