Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Beloit vs Kenosha (2026)

Beloit runs 6% lower than Kenosha for tile roof installation — expect around $17,150 in Beloit against $18,250 in Kenosha, a difference of about $1,100.

Beloit WI

Lower cost
$10,250 $24,050

Typically around $17,150

Kenosha WI

$10,900 $25,600

Typically around $18,250

Expect to pay roughly $1,100 (6%) more for tile roof installation in Kenosha than in Beloit — local labor is the main reason.
Side by side

Beloit vs Kenosha: full breakdown

FactorBeloitKenosha
Typical 2026 cost$17,150$18,250
Estimated range$10,250–$24,050$10,900–$25,600
Labor index (vs US)×0.95×1.01
Climate zoneColdCold
Climate factor×1×1
Local permit$250$275
Labor share$10,300$10,950
Materials/equipment$6,850$7,300

Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.

The verdict

Is the price difference a dealbreaker?

A 6% difference on tile roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.

By type

Tile roof installation by type: Beloit vs Kenosha

Each tile roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.

TypeBeloitKenosha
Concrete tile$10,250$20,250$10,900$21,550
Clay / terracotta tile$13,600$26,900$14,450$28,600
Slate$19,300$47,850$20,500$50,900

Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.

By size

Tile roof installation by roof size: Beloit vs Kenosha

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeBeloitKenosha
1,000 sq ft (10 squares)$6,900$13,600$7,350$14,450
1,500 sq ft (15 squares)$8,800$18,350$9,400$19,500
2,000 sq ft (20 squares)$10,250$24,050$10,900$25,600
2,500 sq ft (25 squares)$12,650$28,800$13,450$30,650
3,000+ sq ft (30 squares)$15,500$34,500$16,450$36,700

Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

Best time to buy

Cheapest time for tile roof installation in either city

Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.

The do-it-right case

A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

The risk case

The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.

Our take

Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.

FAQ

Beloit vs Kenosha

Is tile roof installation cheaper in Beloit or Kenosha?

Beloit wins on price: tile roof installation runs about $17,150 there versus $18,250 in Kenosha, a gap of roughly $1,100 (6%) as of 2026.

Why does tile roof installation cost more in Kenosha than Beloit?

Kenosha's higher labor index (1.01 vs 0.95 in Beloit) is the biggest factor, with the cold/cold climate split and permit fee differences playing a smaller role.

How much is tile roof installation in Beloit, WI?

In Beloit, tile roof installation typically runs $10,250–$24,050 in 2026, with most homeowners paying around $17,150.

When is the cheapest time to buy tile roof installation — and does it differ by city?

Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Beloit and Kenosha, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.

Should I choose where to live based on tile roof installation cost?

Not really — the $1,100 gap is one-time, and smart timing and tighter quotes in Kenosha can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik