Tile Roof Installation cost: Beavercreek vs Cleveland (2026)
The two metros aren't quite in sync on tile roof installation: Beavercreek sits 1% below Cleveland, or roughly $17,050 versus $17,250 — about $200 apart.
Beavercreek OH
Lower costTypically around $17,050
Cleveland OH
Typically around $17,250
Beavercreek vs Cleveland: full breakdown
| Factor | Beavercreek | Cleveland |
|---|---|---|
| Typical 2026 cost | $17,050 | $17,250 |
| Estimated range | $10,200–$23,900 | $10,300–$24,200 |
| Labor index (vs US) | ×0.95 | ×0.96 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $10,250 | $10,350 |
| Materials/equipment | $6,800 | $6,900 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
Is the price difference a dealbreaker?
That 1% gap is small — for tile roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Tile roof installation by type: Beavercreek vs Cleveland
We localize each tile roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Beavercreek | Cleveland |
|---|---|---|
| Concrete tile | $10,200–$20,100 | $10,300–$20,350 |
| Clay / terracotta tile | $13,500–$26,750 | $13,650–$27,050 |
| Slate | $19,150–$47,550 | $19,400–$48,150 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Tile roof installation by roof size: Beavercreek vs Cleveland
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Beavercreek | Cleveland |
|---|---|---|
| 1,000 sq ft (10 squares) | $6,850–$13,500 | $6,950–$13,650 |
| 1,500 sq ft (15 squares) | $8,750–$18,200 | $8,850–$18,450 |
| 2,000 sq ft (20 squares) | $10,200–$23,900 | $10,300–$24,200 |
| 2,500 sq ft (25 squares) | $12,550–$28,650 | $12,700–$29,000 |
| 3,000+ sq ft (30 squares) | $15,400–$34,300 | $15,600–$34,750 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.
Cheapest time for tile roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Beavercreek vs Cleveland
Is tile roof installation cheaper in Beavercreek or Cleveland?
Beavercreek wins on price: tile roof installation runs about $17,050 there versus $17,250 in Cleveland, a gap of roughly $200 (1%) as of 2026.
Why does tile roof installation cost more in Cleveland than Beavercreek?
Cleveland's higher labor index (0.96 vs 0.95 in Beavercreek) is the biggest factor, with the cold/cold climate split playing a smaller role.
How much is tile roof installation in Beavercreek, OH?
In Beavercreek, tile roof installation typically runs $10,200–$23,900 in 2026, with most homeowners paying around $17,050.
When is the cheapest time to buy tile roof installation — and does it differ by city?
No, the seasonal pattern is the same in Beavercreek and Cleveland: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on tile roof installation cost?
Probably not. Yes, $200 is a real gap, but it's a one-time cost you can partly offset in Cleveland with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik