Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Akron vs Beavercreek (2026)

The two metros aren't quite in sync on tile roof installation: Akron sits 1% above Beavercreek, or roughly $17,150 versus $17,050 — about $100 apart.

Akron OH

$10,250 $24,050

Typically around $17,150

Beavercreek OH

Lower cost
$10,200 $23,900

Typically around $17,050

The $100 (1%) premium on tile roof installation in Akron versus Beavercreek comes down mostly to local labor rates.
Side by side

Akron vs Beavercreek: full breakdown

FactorAkronBeavercreek
Typical 2026 cost$17,150$17,050
Estimated range$10,250–$24,050$10,200–$23,900
Labor index (vs US)×0.95×0.95
Climate zoneColdCold
Climate factor×1×1
Local permit$250$250
Labor share$10,300$10,250
Materials/equipment$6,850$6,800

Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.

The verdict

How much should this gap actually matter?

At 1%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for tile roof installation — focus on the contractor, not the city.

By type

Tile roof installation by type: Akron vs Beavercreek

Every tile roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeAkronBeavercreek
Concrete tile$10,250$20,250$10,200$20,100
Clay / terracotta tile$13,600$26,900$13,500$26,750
Slate$19,300$47,850$19,150$47,550

Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.

By size

Tile roof installation by roof size: Akron vs Beavercreek

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeAkronBeavercreek
1,000 sq ft (10 squares)$6,900$13,600$6,850$13,500
1,500 sq ft (15 squares)$8,800$18,350$8,750$18,200
2,000 sq ft (20 squares)$10,250$24,050$10,200$23,900
2,500 sq ft (25 squares)$12,650$28,800$12,550$28,650
3,000+ sq ft (30 squares)$15,500$34,500$15,400$34,300

Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.

Best time to buy

Cheapest time for tile roof installation in either city

Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.

The risk case

The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.

The value case

Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.

The do-it-right case

Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.

Our take

Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.

FAQ

Akron vs Beavercreek

Is tile roof installation cheaper in Akron or Beavercreek?

Yes — Akron costs more. Expect around $17,150 for tile roof installation there against $17,050 in Beavercreek, about $100 (1%) apart in 2026.

Why does tile roof installation cost more in Akron than Beavercreek?

It comes down to labor: Akron indexes at 0.95 against Beavercreek's 0.95. The cold-vs-cold climate difference adds to the gap.

How much is tile roof installation in Akron, OH?

In Akron, tile roof installation typically runs $10,250–$24,050 in 2026, with most homeowners paying around $17,150.

When is the cheapest time to buy tile roof installation — and does it differ by city?

Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Akron and Beavercreek, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.

Should I choose where to live based on tile roof installation cost?

Probably not. Yes, $100 is a real gap, but it's a one-time cost you can partly offset in Akron with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik