Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Ankeny vs Davenport (2026)

In 2026, tile roof installation is about 2% more expensive in Ankeny than in Davenport. Most homeowners pay around $17,150 in Ankeny versus $16,850 in Davenport — a gap of roughly $300.

Ankeny IA

$10,250 $24,050

Typically around $17,150

Davenport IA

Lower cost
$10,050 $23,600

Typically around $16,850

tile roof installation runs about $300 (2%) more in Ankeny than in Davenport, driven mostly by local labor rates.
Side by side

Ankeny vs Davenport: full breakdown

FactorAnkenyDavenport
Typical 2026 cost$17,150$16,850
Estimated range$10,250–$24,050$10,050–$23,600
Labor index (vs US)×0.95×0.93
Climate zoneColdCold
Climate factor×1×1
Local permit$250$250
Labor share$10,300$10,100
Materials/equipment$6,850$6,750

Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.

The verdict

How much should this gap actually matter?

That 2% gap is small — for tile roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.

By type

Tile roof installation by type: Ankeny vs Davenport

Below, each tile roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.

TypeAnkenyDavenport
Concrete tile$10,250$20,250$10,050$19,850
Clay / terracotta tile$13,600$26,900$13,350$26,400
Slate$19,300$47,850$18,950$46,950

Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.

By size

Tile roof installation by roof size: Ankeny vs Davenport

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeAnkenyDavenport
1,000 sq ft (10 squares)$6,900$13,600$6,800$13,350
1,500 sq ft (15 squares)$8,800$18,350$8,650$18,000
2,000 sq ft (20 squares)$10,250$24,050$10,050$23,600
2,500 sq ft (25 squares)$12,650$28,800$12,400$28,250
3,000+ sq ft (30 squares)$15,500$34,500$15,200$33,850

Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.

Best time to buy

Cheapest time for tile roof installation in either city

The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

The risk case

Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.

The do-it-right case

A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.

Our take

The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.

FAQ

Ankeny vs Davenport

Is tile roof installation cheaper in Ankeny or Davenport?

Davenport wins on price: tile roof installation runs about $16,850 there versus $17,150 in Ankeny, a gap of roughly $300 (2%) as of 2026.

Why does tile roof installation cost more in Ankeny than Davenport?

Labor rates explain most of it — 0.95 in Ankeny vs 0.93 in Davenport. A cold climate versus cold accounts for the rest.

How much is tile roof installation in Ankeny, IA?

In Ankeny, tile roof installation typically runs $10,250–$24,050 in 2026, with most homeowners paying around $17,150.

When is the cheapest time to buy tile roof installation — and does it differ by city?

Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Ankeny and Davenport, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.

Should I choose where to live based on tile roof installation cost?

Rarely. The $300 difference is real but one-time, and you can often close most of it in Ankeny by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik