Roofing · Davenport, IA
How much does tile roof installation cost in Davenport, IA? (2026)
In Davenport, tile roof installation runs $10,050–$23,600, with most paying around $16,850 — about 5% below the national average. Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $16,850
- Typical cost
- $16,850
- Labor vs US
- −11%
- Climate
- Cold
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the tile roof installation range.
Key takeaways for Davenport
- In Davenport, tile roof installation runs $10,050–$23,600 — call it $16,850 for a typical job, about 5% below the national average.
- Labor is the swing factor here: Davenport trades bill −11% relative to the national average.
- Permit costs are baked in: Davenport charges about $250 for the Roofing permit.
- 50 to 100 years is the usual service life, so budget for the next one before it fails.
- Late spring to early fall (dry, 45–85°F) is the low-price window — about 5–10% under peak rates.
What goes into the price in Davenport
A typical Davenport tile roof installation of $16,850 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Davenport 2026 range |
|---|---|
| Materials & equipmentThe unit and materials — largely the same cost no matter which city you're in. | $3,900 – $9,350 |
| Labor & installationLabor to remove the old system and install the new one — this is where your city's wage index shows up. | $5,900 – $14,000 |
| Permit & feesWhat this city's building department charges for a Roofing permit. | $250 |
| Total installed cost | $10,050 – $23,600 |
Split from the Davenport estimate using a 60% local-labor share; line items sum to the total.
Why tile roof installation costs what it does in Davenport
- Davenport's labor rates sit about 11% lower than the national average (based on price levels for the Davenport-Moline-Rock Island metro area), pushing the price down.
- A Roofing permit in Davenport costs around $250, included above.
Tile Roof Installation cost by roof size in Davenport
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| roof size | Davenport 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $6,800 – $13,350 |
| 1,500 sq ft (15 squares) | $8,650 – $18,000 |
| 2,000 sq ft (20 squares) | $10,050 – $23,600 |
| 2,500 sq ft (25 squares) | $12,400 – $28,250 |
| 3,000+ sq ft (30 squares) | $15,200 – $33,850 |
National size ranges localized to Davenport labor and climate.
Tile Roof Installation cost by type in Davenport
| Concrete tile | $10,000 – $19,800 |
| Clay / terracotta tile | $13,250 – $26,300 |
| Slate | $18,850 – $46,750 |
Adjusted to Davenport from national type-level ranges.
Tile Roof Installation cost by efficiency in Davenport
Concrete is the affordable workhorse; clay (terracotta) holds its color and resists fade in hot, sunny climates; slate is the premium natural-stone option with the longest life.
| Concrete tileLowest-cost tile; heavy; ~50 yr life | $10,050 – $18,950 |
| Clay / terracotta tileFade-resistant, ideal in hot/coastal climates; 50–100 yr | $13,350 – $23,600 |
| Natural slatePremium stone; 75–100+ yr life | $18,950 – $42,300 |
Labor vs. materials in Davenport
Install crew, removal, permit & startup — the part Davenport rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $16,850 Davenport project; your mix varies with scope.
How we estimate it
| National range | $10,500 – $25,000 |
| Davenport labor adjustment | ×0.93 |
| cold climate factor | ×1 |
| Local permit | +$250 |
| Davenport estimate | $10,050 – $23,600 |
Promo prices vs. the real cost
A low per-square roofing number in an ad means little until you know what scope it covers. Set these marketing figures against the real estimate above:
- Free roof inspection$0 — it's a sales visit
- Per-square teaser priceadvertised low; varies by pitch & material
- Financing offers$0 down · low APR
Additional tile roof installation costs to budget for
Some of these land on the final invoice and some never surface — it comes down to your home's age, access and existing setup.
| Tear-off & disposal of old roofTile is heavy — disposal costs more than asphalt | $1,000 – $4,000 |
| Structural reinforcement for tile weightOften required; tile is much heavier than asphalt | $1,000 – $10,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-grade, replaced mid-life)Underlayment wears out before the tile and is re-done | $500 – $2,500 |
| Flashing, valleys & ridge work | $500 – $2,500 |
| Permit | $200 – $600 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Labor, cleanup and permit
- Reinforced underlayment and battens
- Tear-off and structural check
- Concrete or clay tiles
What affects the cost
- Pitch, complexity and hip/valley count
- Specialty flashing and ridge work
- Roof structure may need reinforcement for tile weight
- Concrete vs clay tile
Ways to save on tile roof installation in Davenport
- Reuse intact tiles where possible on repairs
- Confirm framing can carry the load before buying
- Concrete tile costs less than clay with similar life
- Tiles last 50+ years — strong lifetime value
How long does tile roof installation last in Davenport?
Concrete tile lasts ~50 years; clay and slate 75–100+. The underlayment beneath is usually replaced once mid-life.
Inspect for cracked or slipped tiles and clear debris; the bigger periodic cost is replacing worn underlayment.
Signs you need tile roof installation in Davenport
- Cracked, chipped, or broken tiles after hail, foot traffic, or freeze-thaw
- Slipped or missing tiles leaving gaps in the field
- Leaks or attic moisture pointing to failed underlayment beneath sound tiles
- Efflorescence, deep staining, or flaking on the tile surface
- Sagging areas — a sign the structure is straining under the weight
- Failed flashing in valleys or around penetrations
Repair or replace in Davenport?
Repair if…
- Only a handful of tiles are cracked or slipped
- The underlayment is still sound and leaks are isolated
- Flashing has failed but tiles and structure are fine
Replace if…
- The underlayment has failed across the roof (consider a lift-and-relay first)
- Widespread tile cracking or fading from age or hail
- The roof structure is sagging or can't support the load
Cost calculator
Roof cost by material in Davenport, IA
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Davenport, IA labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,500–$11,150 | $300/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,450–$14,900 | $450/yr |
Standing-seam metal High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $16,750–$29,750 | $400/yr |
Clay / concrete tileThis page Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $18,600–$37,200 | $450/yr |
Per-square ranges are national installed benchmarks localized to Davenport, IA labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for tile roof installation in Davenport
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Why tile roof installation quotes vary — and how to compare them fairly
Two contractors can price the same job thousands apart. Almost always it's the scope each assumed — here's what drives the gap and how to close it.
Why a quote looks high (or low)
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
Get an apples-to-apples bid
- Ask how deck/sheathing repairs are priced if rot is found.
- Verify the contractor is licensed, insured and local, with recent references.
- Compare the workmanship warranty, not just the material warranty.
- Specify tear-off vs. overlay so all bids match.
Questions to ask Davenport Roofing pros
A fair comparison starts with identical questions. Ask each contractor the following before anything gets signed.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Tile Roof Installation in Davenport
How much does tile roof installation cost in Davenport, IA?
Budgeting for tile roof installation? In Davenport, 2026 prices land between $10,050 and $23,600, and about $16,850 is the typical outcome. We localize this using Davenport's labor rates, cold-climate adjustments and permit fees — no separate math needed.
Is tile roof installation more expensive in Davenport than average?
Compared with the rest of the country, Davenport runs about 5% lower than the national average — local labor prices at an index of 0.93 against the US average. and the local Roofing permit costs about $250.
Do I need a permit for tile roof installation in Davenport?
A Roofing permit is standard in Davenport for this kind of work, at roughly $250. You won't need to add it on top of the estimate above — it's already there.
What affects tile roof installation cost the most?
Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates. From there, a handful of specifics push the final number up or down. Your cold climate zone plays a part, but equipment/material grade, the size and complexity of the home, and local labor rates weigh in just as heavily.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national tile roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Davenport using the BEA Regional Price Parity labor index (×0.93 here), the IECC cold-climate factor (×1) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Davenport tile roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Tile roof installation alternatives in Davenport
Homeowners in Davenport often pair this with
A tile roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Davenport
Browse local 2026 costs for every home project in Davenport, IA.